[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20140501162824.17512.556.stgit@bling.home>
Date: Thu, 01 May 2014 10:28:24 -0600
From: Alex Williamson <alex.williamson@...hat.com>
To: linux-pci@...r.kernel.org, iommu@...ts.linux-foundation.org
Cc: bhelgaas@...gle.com, acooks@...il.com, linux-kernel@...r.kernel.org
Subject: [PATCH 13/13] PCI: Remove pci_get_dma_source()
It has no users; replaced by dma_func_alias.
Signed-off-by: Alex Williamson <alex.williamson@...hat.com>
---
drivers/pci/quirks.c | 51 --------------------------------------------------
include/linux/pci.h | 5 -----
2 files changed, 56 deletions(-)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 82b2733..ea55b0f 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3371,57 +3371,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_JMICRON,
PCI_DEVICE_ID_JMICRON_JMB388_ESD,
quirk_dma_func1_alias);
-static struct pci_dev *pci_func_0_dma_source(struct pci_dev *dev)
-{
- if (!PCI_FUNC(dev->devfn))
- return pci_dev_get(dev);
-
- return pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
-}
-
-static const struct pci_dev_dma_source {
- u16 vendor;
- u16 device;
- struct pci_dev *(*dma_source)(struct pci_dev *dev);
-} pci_dev_dma_source[] = {
- /*
- * https://bugzilla.redhat.com/show_bug.cgi?id=605888
- *
- * Some Ricoh devices use the function 0 source ID for DMA on
- * other functions of a multifunction device. The DMA devices
- * is therefore function 0, which will have implications of the
- * iommu grouping of these devices.
- */
- { PCI_VENDOR_ID_RICOH, 0xe822, pci_func_0_dma_source },
- { PCI_VENDOR_ID_RICOH, 0xe230, pci_func_0_dma_source },
- { PCI_VENDOR_ID_RICOH, 0xe832, pci_func_0_dma_source },
- { PCI_VENDOR_ID_RICOH, 0xe476, pci_func_0_dma_source },
- { 0 }
-};
-
-/*
- * IOMMUs with isolation capabilities need to be programmed with the
- * correct source ID of a device. In most cases, the source ID matches
- * the device doing the DMA, but sometimes hardware is broken and will
- * tag the DMA as being sourced from a different device. This function
- * allows that translation. Note that the reference count of the
- * returned device is incremented on all paths.
- */
-struct pci_dev *pci_get_dma_source(struct pci_dev *dev)
-{
- const struct pci_dev_dma_source *i;
-
- for (i = pci_dev_dma_source; i->dma_source; i++) {
- if ((i->vendor == dev->vendor ||
- i->vendor == (u16)PCI_ANY_ID) &&
- (i->device == dev->device ||
- i->device == (u16)PCI_ANY_ID))
- return i->dma_source(dev);
- }
-
- return pci_dev_get(dev);
-}
-
/*
* AMD has indicated that the devices below do not support peer-to-peer
* in any system where they are found in the southbridge with an AMD
diff --git a/include/linux/pci.h b/include/linux/pci.h
index bf4b0e9..65bdcfd 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1530,16 +1530,11 @@ enum pci_fixup_pass {
#ifdef CONFIG_PCI_QUIRKS
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
-struct pci_dev *pci_get_dma_source(struct pci_dev *dev);
int pci_dev_specific_acs_enabled(struct pci_dev *dev, u16 acs_flags);
void pci_dev_specific_enable_acs(struct pci_dev *dev);
#else
static inline void pci_fixup_device(enum pci_fixup_pass pass,
struct pci_dev *dev) { }
-static inline struct pci_dev *pci_get_dma_source(struct pci_dev *dev)
-{
- return pci_dev_get(dev);
-}
static inline int pci_dev_specific_acs_enabled(struct pci_dev *dev,
u16 acs_flags)
{
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists