| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 05 May 2014 13:15:30 +0200
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Eduardo Valentin <eduardo.valentin@...com>
Cc: Zhang Rui <rui.zhang@...el.com>,
Amit Daniel Kachhap <amit.daniel@...sung.com>,
Tomasz Figa <t.figa@...sung.com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Kyungmin Park <kyungmin.park@...sung.com>,
linux-samsung-soc@...r.kernel.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, b.zolnierkie@...sung.com
Subject: [PATCH 01/10] thermal: exynos: remove unused struct
exynos_tmu_registers entries
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
drivers/thermal/samsung/exynos_tmu.h | 40 -------------------------------
drivers/thermal/samsung/exynos_tmu_data.c | 2 --
drivers/thermal/samsung/exynos_tmu_data.h | 1 -
3 files changed, 43 deletions(-)
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 3fb6554..80dc899 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -82,8 +82,6 @@ enum soc_type {
* @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg.
* @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg.
* @triminfo_ctrl: trim info controller register.
- * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl
- reg.
* @tmu_ctrl: TMU main controller register.
* @test_mux_addr_shift: shift bits of test mux address.
* @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
@@ -98,27 +96,13 @@ enum soc_type {
register.
* @calib_mode_mask: mask bits of calibration mode value in tmu_ctrl
register.
- * @therm_trip_tq_en_shift: shift bits of thermal trip enable by TQ pin in
- tmu_ctrl register.
* @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register.
* @tmu_status: register drescribing the TMU status.
* @tmu_cur_temp: register containing the current temperature of the TMU.
- * @tmu_cur_temp_shift: shift bits of current temp value in tmu_cur_temp
- register.
* @threshold_temp: register containing the base threshold level.
* @threshold_th0: Register containing first set of rising levels.
- * @threshold_th0_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th0_l1_shift: shift bits of level1 threshold temperature.
- * @threshold_th0_l2_shift: shift bits of level2 threshold temperature.
- * @threshold_th0_l3_shift: shift bits of level3 threshold temperature.
* @threshold_th1: Register containing second set of rising levels.
- * @threshold_th1_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th1_l1_shift: shift bits of level1 threshold temperature.
- * @threshold_th1_l2_shift: shift bits of level2 threshold temperature.
- * @threshold_th1_l3_shift: shift bits of level3 threshold temperature.
* @threshold_th2: Register containing third set of rising levels.
- * @threshold_th2_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th3: Register containing fourth set of rising levels.
* @threshold_th3_l0_shift: shift bits of level0 threshold temperature.
* @tmu_inten: register containing the different threshold interrupt
enable bits.
@@ -131,15 +115,11 @@ enum soc_type {
* @inten_rise2_shift: shift bits of rising 2 interrupt bits.
* @inten_rise3_shift: shift bits of rising 3 interrupt bits.
* @inten_fall0_shift: shift bits of falling 0 interrupt bits.
- * @inten_fall1_shift: shift bits of falling 1 interrupt bits.
- * @inten_fall2_shift: shift bits of falling 2 interrupt bits.
- * @inten_fall3_shift: shift bits of falling 3 interrupt bits.
* @tmu_intstat: Register containing the interrupt status values.
* @tmu_intclear: Register for clearing the raised interrupt status.
* @emul_con: TMU emulation controller register.
* @emul_temp_shift: shift bits of emulation temperature.
* @emul_time_shift: shift bits of emulation time.
- * @emul_time_mask: mask bits of emulation time.
* @tmu_irqstatus: register to find which TMU generated interrupts.
* @tmu_pmin: register to get/set the Pmin value.
*/
@@ -149,7 +129,6 @@ struct exynos_tmu_registers {
u32 triminfo_85_shift;
u32 triminfo_ctrl;
- u32 triminfo_reload_shift;
u32 tmu_ctrl;
u32 test_mux_addr_shift;
@@ -162,32 +141,17 @@ struct exynos_tmu_registers {
u32 buf_slope_sel_mask;
u32 calib_mode_shift;
u32 calib_mode_mask;
- u32 therm_trip_tq_en_shift;
u32 core_en_shift;
u32 tmu_status;
u32 tmu_cur_temp;
- u32 tmu_cur_temp_shift;
u32 threshold_temp;
u32 threshold_th0;
- u32 threshold_th0_l0_shift;
- u32 threshold_th0_l1_shift;
- u32 threshold_th0_l2_shift;
- u32 threshold_th0_l3_shift;
-
u32 threshold_th1;
- u32 threshold_th1_l0_shift;
- u32 threshold_th1_l1_shift;
- u32 threshold_th1_l2_shift;
- u32 threshold_th1_l3_shift;
-
u32 threshold_th2;
- u32 threshold_th2_l0_shift;
-
- u32 threshold_th3;
u32 threshold_th3_l0_shift;
u32 tmu_inten;
@@ -200,9 +164,6 @@ struct exynos_tmu_registers {
u32 inten_rise2_shift;
u32 inten_rise3_shift;
u32 inten_fall0_shift;
- u32 inten_fall1_shift;
- u32 inten_fall2_shift;
- u32 inten_fall3_shift;
u32 tmu_intstat;
@@ -211,7 +172,6 @@ struct exynos_tmu_registers {
u32 emul_con;
u32 emul_temp_shift;
u32 emul_time_shift;
- u32 emul_time_mask;
u32 tmu_irqstatus;
u32 tmu_pmin;
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 476b768..36d64d6 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -96,7 +96,6 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
.triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
- .triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
.buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
@@ -126,7 +125,6 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define EXYNOS4412_TMU_DATA \
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index a1ea19d..06c4345 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -63,7 +63,6 @@
#define EXYNOS_THD_TEMP_FALL 0x54
#define EXYNOS_EMUL_CON 0x80
-#define EXYNOS_TRIMINFO_RELOAD_SHIFT 1
#define EXYNOS_TRIMINFO_25_SHIFT 0
#define EXYNOS_TRIMINFO_85_SHIFT 8
#define EXYNOS_TMU_RISE_INT_MASK 0x111
--
1.8.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists