| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1399362017-25787-3-git-send-email-hchaumette@adeneo-embedded.com>
Date: Tue, 6 May 2014 09:40:17 +0200
From: Hubert Chaumette <hchaumette@...neo-embedded.com>
To: f.fainelli@...il.com
Cc: netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
robh+dt@...nel.org, pawel.moll@....com, mark.rutland@....com,
ijc+devicetree@...lion.org.uk, galak@...eaurora.org,
rdunlap@...radead.org, xobs@...agi.com, davem@...emloft.net,
devicetree@...r.kernel.org, linux-doc@...r.kernel.org
Subject: [PATCH v4 2/2] ARM: i.MX6: Add OF configuration support for ksz9031
Adds support for ksz9031 PAD skew configuration over devicetree.
Signed-off-by: Hubert Chaumette <hchaumette@...neo-embedded.com>
---
drivers/net/phy/micrel.c | 106 ++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 105 insertions(+), 1 deletion(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index d849684..bc7c7d2 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -283,6 +283,110 @@ static int ksz9021_config_init(struct phy_device *phydev)
return 0;
}
+#define MII_KSZ9031RN_MMD_CTRL_REG 0x0d
+#define MII_KSZ9031RN_MMD_REGDATA_REG 0x0e
+#define OP_DATA 1
+#define KSZ9031_PS_TO_REG 60
+
+/* Extended registers */
+#define MII_KSZ9031RN_CONTROL_PAD_SKEW 4
+#define MII_KSZ9031RN_RX_DATA_PAD_SKEW 5
+#define MII_KSZ9031RN_TX_DATA_PAD_SKEW 6
+#define MII_KSZ9031RN_CLK_PAD_SKEW 8
+
+static int ksz9031_extended_write(struct phy_device *phydev,
+ u8 mode, u32 dev_addr, u32 regnum, u16 val)
+{
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
+ phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
+ return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val);
+}
+
+static int ksz9031_extended_read(struct phy_device *phydev,
+ u8 mode, u32 dev_addr, u32 regnum)
+{
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
+ phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
+ phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
+ return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG);
+}
+
+static int ksz9031_of_load_skew_values(struct phy_device *phydev,
+ struct device_node *of_node,
+ u16 reg, size_t field_sz,
+ char *field[], u8 numfields)
+{
+ int val[4] = {-1, -2, -3, -4};
+ int matches = 0;
+ u16 mask;
+ u16 maxval;
+ u16 newval;
+ int i;
+
+ for (i = 0; i < numfields; i++)
+ if (!of_property_read_u32(of_node, field[i], val + i))
+ matches++;
+
+ if (!matches)
+ return 0;
+
+ if (matches < numfields)
+ newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
+ else
+ newval = 0;
+
+ maxval = (field_sz == 4) ? 0xf : 0x1f;
+ for (i = 0; i < numfields; i++)
+ if (val[i] != -(i + 1)) {
+ mask = 0xffff;
+ mask ^= maxval << (field_sz * i);
+ newval = (newval & mask) |
+ (((val[i] / KSZ9031_PS_TO_REG) & maxval)
+ << (field_sz * i));
+ }
+
+ return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
+}
+
+static int ksz9031_config_init(struct phy_device *phydev)
+{
+ struct device *dev = &phydev->dev;
+ struct device_node *of_node = dev->of_node;
+ char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"};
+ char *rx_data_skews[4] = {
+ "rxd0-skew-ps", "rxd1-skew-ps",
+ "rxd2-skew-ps", "rxd3-skew-ps"
+ };
+ char *tx_data_skews[4] = {
+ "txd0-skew-ps", "txd1-skew-ps",
+ "txd2-skew-ps", "txd3-skew-ps"
+ };
+ char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"};
+
+ if (!of_node && dev->parent->of_node)
+ of_node = dev->parent->of_node;
+
+ if (of_node) {
+ ksz9031_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_CLK_PAD_SKEW, 5,
+ clk_skews, 2);
+
+ ksz9031_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_CONTROL_PAD_SKEW, 4,
+ control_skews, 2);
+
+ ksz9031_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4,
+ rx_data_skews, 4);
+
+ ksz9031_of_load_skew_values(phydev, of_node,
+ MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
+ tx_data_skews, 4);
+ }
+ return 0;
+}
+
#define KSZ8873MLL_GLOBAL_CONTROL_4 0x06
#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX (1 << 6)
#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED (1 << 4)
@@ -469,7 +573,7 @@ static struct phy_driver ksphy_driver[] = {
.features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
| SUPPORTED_Asym_Pause),
.flags = PHY_HAS_MAGICANEG | PHY_HAS_INTERRUPT,
- .config_init = kszphy_config_init,
+ .config_init = ksz9031_config_init,
.config_aneg = genphy_config_aneg,
.read_status = genphy_read_status,
.ack_interrupt = kszphy_ack_interrupt,
--
2.0.0.rc0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists