[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1584794.IM1uiSkBdk@amdc1032>
Date: Tue, 06 May 2014 13:34:46 +0200
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: linux-arm-kernel@...ts.infradead.org
Cc: Gregory CLEMENT <gregory.clement@...e-electrons.com>,
Mathias Nyman <mathias.nyman@...el.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Felipe Balbi <balbi@...com>, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, Jason Cooper <jason@...edaemon.net>,
Andrew Lunn <andrew@...n.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Lior Amsalem <alior@...vell.com>,
Tawfik Bayouk <tawfik@...vell.com>, devicetree@...r.kernel.org,
Nadav Haklai <nadavh@...vell.com>,
Rob Herring <robh+dt@...nel.org>,
Ezequiel Garcia <ezequiel.garcia@...e-electrons.com>,
Grant Likely <grant.likely@...aro.org>
Subject: Re: [PATCH v3 06/20] usb: host: xhci-plat: Add support for the Armada
38x
Hi,
On Tuesday, May 06, 2014 02:14:01 AM Gregory CLEMENT wrote:
> For the Armada 38x SoCs which come with an xhci controller, specific
> initialization must be done during probe related to the MBus windows
> configuration. This patch adds the support of this quirk.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@...e-electrons.com>
> ---
> drivers/usb/host/Kconfig | 7 +++++
> drivers/usb/host/Makefile | 1 +
> drivers/usb/host/xhci-mvebu.c | 71 +++++++++++++++++++++++++++++++++++++++++++
> drivers/usb/host/xhci-mvebu.h | 21 +++++++++++++
> drivers/usb/host/xhci-plat.c | 6 ++++
> 5 files changed, 106 insertions(+)
> create mode 100644 drivers/usb/host/xhci-mvebu.c
> create mode 100644 drivers/usb/host/xhci-mvebu.h
>
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index 3d9e54062d62..e70943fac4a1 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -29,6 +29,13 @@ if USB_XHCI_HCD
> config USB_XHCI_PLATFORM
> tristate
>
> +config USB_XHCI_MVEBU
> + tristate "xHCI support for Marvell Armada 38x"
Please limit this driver to mvebu arch and compile testing, i.e.
depends on ARCH_MVEBU || COMPILE_TEST
> + select USB_XHCI_PLATFORM
> + ---help---
> + Say 'Y' to enable the support for the xHCI host controller
> + found in Marvell Armada 38x ARM SOCs.
> +
> endif # USB_XHCI_HCD
>
> config USB_EHCI_HCD
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists