| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140506135427.GG6503@lunn.ch>
Date: Tue, 6 May 2014 15:54:27 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Gregory CLEMENT <gregory.clement@...e-electrons.com>
Cc: Mathias Nyman <mathias.nyman@...el.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Felipe Balbi <balbi@...com>, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, Jason Cooper <jason@...edaemon.net>,
Andrew Lunn <andrew@...n.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Thomas Petazzoni <thomas.petazzoni@...e-electrons.com>,
Ezequiel Garcia <ezequiel.garcia@...e-electrons.com>,
linux-arm-kernel@...ts.infradead.org,
Lior Amsalem <alior@...vell.com>,
Tawfik Bayouk <tawfik@...vell.com>,
Nadav Haklai <nadavh@...vell.com>,
Grant Likely <grant.likely@...aro.org>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org
Subject: Re: [PATCH v3 17/20] phy: Add support for USB cluster on the Armada
375 SoC
On Tue, May 06, 2014 at 02:14:12AM +0200, Gregory CLEMENT wrote:
> The Armada 375 SoC comes with an USB2 host and device controller and
> an USB3 controller. The USB cluster control register allows to manage
> common features of both USB controllers. It uses the generic PHY
> framework
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@...e-electrons.com>
> ---
> drivers/phy/Kconfig | 5 ++
> drivers/phy/Makefile | 1 +
> drivers/phy/phy-armada375-usb2.c | 154 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 160 insertions(+)
> create mode 100644 drivers/phy/phy-armada375-usb2.c
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 3bb05f17b9b4..cdf3e2c24e3a 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -15,6 +15,11 @@ config GENERIC_PHY
> phy users can obtain reference to the PHY. All the users of this
> framework should select this config.
>
> +config ARMADA375_USBCLUSTER_PHY
> + def_bool y
> + depends on OF
> + select GENERIC_PHY
> +
> config PHY_EXYNOS_MIPI_VIDEO
> tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
> depends on HAS_IOMEM
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index 2faf78edc864..47d5a86807b6 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -3,6 +3,7 @@
> #
>
> obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> +obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
> obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
> obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
> obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
> diff --git a/drivers/phy/phy-armada375-usb2.c b/drivers/phy/phy-armada375-usb2.c
> new file mode 100644
> index 000000000000..8bbac45e72c8
> --- /dev/null
> +++ b/drivers/phy/phy-armada375-usb2.c
> @@ -0,0 +1,154 @@
> +/*
> + * USB cluster support for Armada 375 platform.
> + *
> + * Copyright (C) 2014 Marvell
> + *
> + * Gregory CLEMENT <gregory.clement@...e-electrons.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2 or later. This program is licensed "as is"
> + * without any warranty of any kind, whether express or implied.
> + *
> + * Armada 375 comes with an USB2 host and device controller and an
> + * USB3 controller. The USB cluster control register allows to manage
> + * common features of both USB controller.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#define USB2_PHY_CONFIG_ENABLE BIT(0) /* active low */
> +
> +/* the USB cluster allow to choose between two PHYs*/
> +#define NB_PHY 2
> +
> +enum {
> + PHY_USB2 = 0,
> + PHY_USB3 = 1,
> +};
> +
> +struct armada375_cluster_phy {
> + struct phy *phy;
> + void __iomem *reg;
> + bool enable;
> + bool use_usb3;
Hi Gregory
nit: How about using the enum you just defined?
> +};
> +
> +struct armada375_cluster_phy usb_cluster_phy[NB_PHY];
> +
> +static int armada375_usb_phy_init(struct phy *phy)
> +{
> + struct armada375_cluster_phy *cluster_phy = phy_get_drvdata(phy);
> + u32 reg;
> +
> + if (cluster_phy->enable) {
> + reg = readl(cluster_phy->reg);
> + if (cluster_phy->use_usb3)
> + reg |= USB2_PHY_CONFIG_ENABLE;
> + else
> + reg &= ~USB2_PHY_CONFIG_ENABLE;
> + writel(reg, cluster_phy->reg);
> +
> + return 0;
> + } else {
> + return -ENODEV;
> + }
> +}
> +
> +static struct phy_ops armada375_usb_phy_ops = {
> + .init = armada375_usb_phy_init,
> + .owner = THIS_MODULE,
> +};
> +
> +static struct phy *armada375_usb_phy_xlate(struct device *dev,
> + struct of_phandle_args *args)
> +{
> + if (WARN_ON(args->args[0] >= NB_PHY))
> + return ERR_PTR(-ENODEV);
> +
> + return usb_cluster_phy[args->args[0]].phy;
> +}
> +
> +static int armada375_usb_phy_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct phy *phy;
> + struct device_node *np = dev->of_node;
> + struct phy_provider *phy_provider;
> + void __iomem *usb_cluster_base;
> + struct device_node *xhci_node;
> + int i;
> +
> + usb_cluster_base = of_iomap(np, 0);
devm_ API?
Check the return value for an error?
> + BUG_ON(!usb_cluster_base);
> +
> + for (i = 0; i < NB_PHY; i++) {
> + phy = devm_phy_create(dev, &armada375_usb_phy_ops, NULL);
> + if (IS_ERR(phy))
> + dev_err(dev, "failed to create PHY n%d\n", i);
> +
> + usb_cluster_phy[i].phy = phy;
> + usb_cluster_phy[i].reg = usb_cluster_base;
> + usb_cluster_phy[i].enable = false;
> + phy_set_drvdata(phy, &usb_cluster_phy[i]);
> + }
> +
> + usb_cluster_phy[PHY_USB2].use_usb3 = false;
> + usb_cluster_phy[PHY_USB3].use_usb3 = true;
> +
> + /*
> + * We can't use the first usb2 unit and usb3 at the same time
> + * to manage a USB2 device, so let's disable usb2 if usb3 is
> + * slelected. In this case USB2 device will be managed by the
selected
> + * xhci controller.
> + */
> +
> + xhci_node = of_find_compatible_node(NULL, NULL,
> + "marvell,armada-375-xhci");
> +
> + if (xhci_node && of_device_is_available(xhci_node)) {
> + usb_cluster_phy[PHY_USB3].enable = true;
> + } else {
> + struct device_node *ehci_node;
> + ehci_node = of_find_compatible_node(NULL, NULL,
> + "marvell,orion-ehci");
> + if (ehci_node && of_device_is_available(ehci_node))
> + usb_cluster_phy[PHY_USB2].enable = true;
> + of_node_put(ehci_node);
> + }
> +
> + of_node_put(xhci_node);
> +
> + phy_provider = devm_of_phy_provider_register(&pdev->dev,
> + armada375_usb_phy_xlate);
> + if (IS_ERR(phy_provider))
> + return PTR_ERR(phy_provider);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id of_usb_cluster_table[] = {
> + { .compatible = "marvell,armada-375-usb-cluster", },
> + { /* end of list */ },
> +};
> +MODULE_DEVICE_TABLE(of, of_usb_cluster_table);
> +
> +static struct platform_driver armada375_usb_phy_driver = {
> + .probe = armada375_usb_phy_probe,
> + .driver = {
> + .of_match_table = of_usb_cluster_table,
> + .name = "armada-375-usb-cluster",
> + .owner = THIS_MODULE,
> + }
> +};
> +module_platform_driver(armada375_usb_phy_driver);
> +
> +MODULE_DESCRIPTION("Armada 375 USB cluster driver");
> +MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@...e-electrons.com>");
> +MODULE_LICENSE("GPL");
> --
> 1.8.1.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists