| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAOk88BLCq4s8Lb4SLpTS9Mmz2Qe2g5+9ENw7h6huQdXBv_Nq0A@mail.gmail.com>
Date: Wed, 7 May 2014 12:16:45 -0700
From: Brian Lilly <brian@...stalfontz.com>
To: Florian Fainelli <f.fainelli@...il.com>
Cc: Uwe Kleine-König
<u.kleine-koenig@...gutronix.de>,
"David S. Miller" <davem@...emloft.net>,
Fabio Estevam <fabio.estevam@...escale.com>,
Jim Baxter <jim_baxter@...tor.com>,
Frank Li <Frank.Li@...escale.com>,
Fugang Duan <B38611@...escale.com>,
netdev <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
kernel <kernel@...gutronix.de>
Subject: Re: i.MX28 based system losing eth0 on boot
Also, in 3.14, commenting out both "return -ETIMEDOUT" instances in
fec_main.c results in a working interface.
Please let me know if you have any questions.
Thank you.
Brian Lilly
Crystalfontz America, Incorporated
12412 East Saltese Road
Spokane Valley, WA 99216
brian@...stalfontz.com http://www.crystalfontz.com
Twitter: @Crystalfontz
US toll-free (888) 206-9720 voice (509) 892-1200
On Tue, May 6, 2014 at 8:07 PM, Florian Fainelli <f.fainelli@...il.com> wrote:
> 2014-05-06 15:27 GMT-07:00 Brian Lilly <brian@...stalfontz.com>:
>> It would appear that I don't have that commit. I could move to 3.14
>> to see if it makes a difference, but the last couple of responses have
>> been on 3.12.18 -- or perhaps I'm missing something else.
>
> I did miss that you were also seeing the problem in 3.12. At that
> point, I believe that the driver was working around a potential PHY
> bug that is not covered by the SMSC PHY driver, or that the MDIO
> timeout is simply not long enough, or that your MDIO interrupts fire
> much longer than what the timeout allows, or that these interrupts are
> not reliable.
>
> You could probably try to ignore the timeout and see if you get
> sensible data out of the MDIO bus regardless.
>
>> Please let me know if you have any questions.
>>
>> Thank you.
>>
>> Brian Lilly
>> Crystalfontz America, Incorporated
>> 12412 East Saltese Road
>> Spokane Valley, WA 99216
>> brian@...stalfontz.com http://www.crystalfontz.com
>> Twitter: @Crystalfontz
>> US toll-free (888) 206-9720 voice (509) 892-1200
>>
>>
>> On Tue, May 6, 2014 at 3:06 PM, Florian Fainelli <f.fainelli@...il.com> wrote:
>>> 2014-05-06 14:40 GMT-07:00 Brian Lilly <brian@...stalfontz.com>:
>>>> The PHY on board is the SMSC LAN8720
>>>>
>>>> With the generic PHY driver selected: http://pastebin.com/A4MH4Ptw
>>>>
>>>> [ 28.828761] fec 800f0000.ethernet eth0: Freescale FEC PHY driver
>>>> [Generic PHY] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1)
>>>> [ 28.840626] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>>>> [ 30.827536] libphy: 800f0000.etherne:00 - Link is Up - 100/Full
>>>> [ 30.833739] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>>>> [ 32.986999] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
>>>> [ 37.316421] fec 800f0000.ethernet eth0: Freescale FEC PHY driver
>>>> [Generic PHY] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1)
>>>> [ 38.345047] fec 800f0000.ethernet eth0: MDIO read timeout
>>>> [ 39.506210] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>>>> [ 40.374961] fec 800f0000.ethernet eth0: MDIO read timeout
>>>>
>>>> With the SMSC PHY driver selected: http://pastebin.com/DhdDyrMv
>>>>
>>>> [ 28.778974] fec 800f0000.ethernet eth0: Freescale FEC PHY driver
>>>> [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1)
>>>> [ 28.791742] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>>>> [ 30.773078] libphy: 800f0000.etherne:00 - Link is Up - 100/Full
>>>> [ 30.779286] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>>>> [ 32.934692] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
>>>> [ 37.242162] fec 800f0000.ethernet eth0: Freescale FEC PHY driver
>>>> [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1)
>>>> [ 38.270611] fec 800f0000.ethernet eth0: MDIO read timeout
>>>> [ 39.415256] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>>>> [ 40.300454] fec 800f0000.ethernet eth0: MDIO read timeout
>>>
>>> Thanks for trying this, at least this is consistent no matter which
>>> PHY driver we are using. Just to rule out a potential PHY power-down
>>> issue, could you try to revert the following commit
>>> be9dad1f9f26604fb71c0d53ccb39a8f1d425807 ("net: phy: suspend phydev
>>> when going to HALTED") and see if that works better for you?
>>>
>>> Thanks!
>>>
>>>>
>>>> On Tue, May 6, 2014 at 12:24 PM, Florian Fainelli <f.fainelli@...il.com> wrote:
>>>>> 2014-05-06 12:12 GMT-07:00 Brian Lilly <brian@...stalfontz.com>:
>>>>>> It is happening during boot up:
>>>>>>
>>>>>> <snip, kernel 3.12 >
>>>>>>
>>>>>> Configuring network interfaces... [ 35.117114] fec 800f0000.ethernet
>>>>>> eth0: Freescale FEC PHY driver [SMSC LAN8710/LAN8720]
>>>>>
>>>>> Note that the SMSC PHY driver is picked up here, and that specific
>>>>> driver implements a different phy_read_status() callback due to how
>>>>> the PHY operates. The PHY driver also overrides the config_init()
>>>>> callback to perform some PHY-specific initialization. See below for
>>>>> more.
>>>>>
>>>>>> (mii_bus:phy_addr=800f0000.etherne:00, irq=-1)
>>>>>> [ 35.129967] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>>>>>> udhcpc (v1.21.1) started
>>>>>>
>>>>>> Sending discover...
>>>>>>
>>>>>> [ 37.113901] libphy: 800f0000.etherne:00 - Link is Up - 100/Full
>>>>>> [ 37.120134] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>>>>>> Sending discover...
>>>>>>
>>>>>> Sending select for 10.10.10.217...
>>>>>> Lease of 10.10.10.217 obtained, lease time 86400
>>>>>> /etc/udhcpc.d/50default: Adding DNS 10.10.10.13
>>>>>> [ 39.319957] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
>>>>>> done.
>>>>>> Starting rpcbind daemon...done.
>>>>>> net.ipv4.conf.default.rp_filter = 1
>>>>>> net.ipv4.conf.all.rp_filter = 1
>>>>>> Mon Apr 14 22:40:00 UTC 2014
>>>>>> INIT: Entering runlevel: 5
>>>>>> Starting Xserver
>>>>>> Starting system message bus: dbus.
>>>>>> Starting Connection Manager
>>>>>> Starting wpa_supplicant
>>>>>> Successfully initialized wpa_supplicant
>>>>>> Starting Dropbear SSH server
>>>>>> [ 44.754915] fec 800f0000.ethernet eth0: Freescale FEC PHY driver
>>>>>> [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1)
>>>>>
>>>>> The correct PHY driver is selected here...
>>>>>
>>>>>> [ 45.781364] fec 800f0000.ethernet eth0: MDIO read timeout
>>>>>> [ 46.826170] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
>>>>>> [ 47.811385] fec 800f0000.ethernet eth0: MDIO read timeout
>>>>>
>>>>> But we are still seeing MDIO read timeouts, which is not great.
>>>>>
>>>>>>
>>>>>> With a different kernel (3.14):
>>>>>>
>>>>>> [ 28.989897] fec 800f0000.ethernet eth0: Freescale FEC PHY driver
>>>>>> [Generic PHY] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1)
>>>>>> [ 30.991210] libphy: 800f0000.etherne:00 - Link is Up - 100/Full
>>>>>> [ 37.369372] fec 800f0000.ethernet eth0: Freescale FEC PHY driver
>>>>>> [Generic PHY] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1)
>>>>>
>>>>> Here, the Generic PHY driver has been selected, which will use the
>>>>> MII_BMSR register contents to determine the Link status and
>>>>> parameters. You might want to make sure that your board selects the
>>>>> appropriate PHY driver, such that we are not chasing two issues here.
>>>>>
>>>>>> [ 38.398346] fec 800f0000.ethernet eth0: MDIO read timeout
>>>>>> [ 39.438412] fec 800f0000.ethernet eth0: MDIO read timeout
>>>>>> [ 39.468419] fec 800f0000.ethernet eth0: MDIO write timeout
>>>>>> [ 40.498848] fec 800f0000.ethernet eth0: MDIO read timeout
>>>>>
>>>>> It would also be helpful to print the register that were accessed,
>>>>> such that you could correlate this with the exact steps in the PHY
>>>>> library state machine. Please also retry the experiment with the SMSC
>>>>> PHY driver enabled, as it does some PHY specific initialization that
>>>>> seems to be relevant. Then we are hopefully left with only the MDIO
>>>>> timeout issue and not the PHY mis-configuration + MDIO timeout.
>>>>>
>>>>>>
>>>>>> Afterward I have to ifdown eth0, ifup eth0 and then it functions
>>>>>> normally, without reverting the commit.
>>>>>>
>>>>>> root@...100xx:~# ifdown eth0
>>>>>> [ 1154.679658] fec 800f0000.ethernet eth0: Freescale FEC PHY driver
>>>>>> [Generic PHY] (mii_bus:phy_addr=800f0000.etherne:00, irq=-1)
>>>>>> root@...100xx:~# ifup eth0
>>>>>> udhcpc (v1.21.1) started
>>>>>> Sending discover...
>>>>>> [ 1156.679547] libphy: 800f0000.etherne:00 - Link is Up - 100/Full
>>>>>> Sending discover...
>>>>>> Sending select for 10.10.10.217...
>>>>>> Lease of 10.10.10.217 obtained, lease time 86400
>>>>>> ip: RTNETLINK answers: File exists
>>>>>>
>>>>>> --
>>>>>> Brian
>>>>>>
>>>>>>
>>>>>> On Tue, May 6, 2014 at 11:11 AM, Uwe Kleine-König
>>>>>> <u.kleine-koenig@...gutronix.de> wrote:
>>>>>>> Hello Brian,
>>>>>>>
>>>>>>> On Tue, May 06, 2014 at 09:44:34AM -0700, Brian Lilly wrote:
>>>>>>>> With commit a264b981f2c76e281ef27e7232774bf6c54ec865 we're having eth0
>>>>>>>> come up, then brought right back down with an MDIO rx timeout moments
>>>>>>>> after. Adding back in the removed code keeps the interface alive and
>>>>>>>> it's working afterward without trouble. I've tested the re-inserted
>>>>>>>> code in 3.12, 3.14 without issue on our boards.
>>>>>>> So you can reliably trigger that problem? You're just doing
>>>>>>>
>>>>>>> ifconfig eth0 1.2.3.4 up
>>>>>>>
>>>>>>> (or equivalent) and the interface goes down without further
>>>>>>> interference with the above mentioned commit? The exact error you're
>>>>>>> seeing is
>>>>>>>
>>>>>>> MDIO read timeout
>>>>>>>
>>>>>>> (with some prefix saying something about fec and eth0 I think)?
>>>>>>>
>>>>>>> This error is also present with a264b981f2 reverted, just doesn't affect
>>>>>>> eth0 being functional? Does the timeout always happen, or only on
>>>>>>> specific addresses?
>>>>>>>
>>>>>>> This is not a proper fix, but does it help to increment FEC_MII_TIMEOUT?
>>>>>>>
>>>>>>>> Is there something else that can be done to prevent the MDIO timeouts?
>>>>>>>> We are using basically the same schematic for networking as the
>>>>>>>> imx28evk.
>>>>>>> Hard to say, but assuming it works just fine on the imx28evk for you,
>>>>>>> too, there seems to be some hardware difference that makes your machine
>>>>>>> fail. (That doesn't mean it's not fixable in software.)
>>>>>>>
>>>>>>> I don't know if a mdio read error is intended to make the device go
>>>>>>> down, maybe one the the netdev guys can answer that.
>>>>>>> Assuming that it's not intended, instrument the code, find out how that
>>>>>>> timeout makes your device go down and find the wrong branch. I'd start
>>>>>>> with adding stackdumps when the mdio timeout happens and when
>>>>>>> fec_enet_start_xmit is called with fep->link == 0.
>>>>>>>
>>>>>>> Best regards
>>>>>>> Uwe
>>>>>>>
>>>>>>> --
>>>>>>> Pengutronix e.K. | Uwe Kleine-König |
>>>>>>> Industrial Linux Solutions | http://www.pengutronix.de/ |
>>>>>> --
>>>>>> To unsubscribe from this list: send the line "unsubscribe netdev" in
>>>>>> the body of a message to majordomo@...r.kernel.org
>>>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Florian
>>>
>>>
>>>
>>> --
>>> Florian
>
>
>
> --
> Florian
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists