[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGb2v664vFwezKVp+C1UYdsUktRhrZDxjsyf9L=kwVHGCUV=HA@mail.gmail.com>
Date: Thu, 8 May 2014 11:40:59 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>
Cc: Boris BREZILLON <boris.brezillon@...e-electrons.com>,
Emilio López <emilio@...pez.com.ar>,
Mike Turquette <mturquette@...aro.org>,
Samuel Ortiz <sameo@...ux.intel.com>,
Lee Jones <lee.jones@...aro.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
Shuge <shuge@...winnertech.com>, kevin <kevin@...winnertech.com>,
Hans de Goede <hdegoede@...hat.com>,
Randy Dunlap <rdunlap@...radead.org>,
devicetree <devicetree@...r.kernel.org>,
linux-doc@...r.kernel.org,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
dev <dev@...ux-sunxi.org>
Subject: Re: [PATCH v2 7/7] ARM: sunxi: dt: add PRCM clk and reset controller subdevices
On Thu, May 8, 2014 at 11:17 AM, Maxime Ripard
<maxime.ripard@...e-electrons.com> wrote:
> On Wed, May 07, 2014 at 07:25:54PM +0200, Boris BREZILLON wrote:
>> Add DT definitions for PRCM (Power/Reset/Clock Management) clock and reset
>> controller subdevices.
>>
>> Signed-off-by: Boris BREZILLON <boris.brezillon@...e-electrons.com>
>> ---
>> arch/arm/boot/dts/sun6i-a31.dtsi | 39 ++++++++++++++++++++++++++++++++++++++-
>> 1 file changed, 38 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
>> index ec3253a..b69be0b 100644
>> --- a/arch/arm/boot/dts/sun6i-a31.dtsi
>> +++ b/arch/arm/boot/dts/sun6i-a31.dtsi
>> @@ -498,9 +498,46 @@
>> reg = <0x01f01c00 0x300>;
>> };
>>
>> - prcm@...01c00 {
>> + prcm@...01400 {
>
> This has already been fixed by Hans.
>
>> compatible = "allwinner,sun6i-a31-prcm";
>> reg = <0x01f01400 0x200>;
>> +
>> + ar100: ar100_clk {
>> + compatible = "allwinner,sun6i-a31-ar100-clk";
>> + #clock-cells = <0>;
>> + clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
>> + };
>> +
>> + ahb0: ahb0_clk {
>> + compatible = "fixed-factor-clock";
>> + #clock-cells = <0>;
>> + clock-div = <1>;
>> + clock-mult = <1>;
>> + clocks = <&ar100>;
>> + clock-output-names = "ahb0";
>> + };
>> +
>> + apb0: apb0_clk {
>> + compatible = "allwinner,sun6i-a31-apb0-clk";
>> + #clock-cells = <0>;
>> + clocks = <&ahb0>;
>> + clock-output-names = "apb0";
>> + };
>> +
>> + apb0_gates: apb0_gates_clk {
>> + compatible = "allwinner,sun6i-a31-apb0-gates-clk";
>> + #clock-cells = <1>;
>> + clocks = <&apb0>;
>> + clock-output-names = "apb0_pio", "apb0_ir",
>> + "apb0_timer01", "apb0_p2wi",
>
> timer01 ? is this a typo?
A23 manual lists the clock gate as "r_timer0_1", so I put the name on the wiki.
Allwinner sun6i code uses "r_tmr" or just "tmr". I see no problem naming this
clock output as "apb0_timer" though.
>> + "apb0_uart", "apb0_1wire",
>> + "apb0_i2c";
>> + };
>> +
>> + apb0_rst: apb0_rst {
>> + compatible = "allwinner,sun6i-a31-clock-reset";
>> + #reset-cells = <1>;
>> + };
>> };
>> };
>> };
>> --
>> 1.8.3.2
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists