| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20140512003205.785772389@1wt.eu>
Date: Mon, 12 May 2014 02:34:03 +0200
From: Willy Tarreau <w@....eu>
To: linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc: Mikulas Patocka <mpatocka@...hat.com>,
"Rafael J. Wysocki" <rafael.j.wysocki@...el.com>,
Willy Tarreau <w@....eu>
Subject: [ 123/143] powernow-k6: correctly initialize default parameters
2.6.32-longterm review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <mpatocka@...hat.com>
commit d82b922a4acc1781d368aceac2f9da43b038cab2 upstream
The powernow-k6 driver used to read the initial multiplier from the
powernow register. However, there is a problem with this:
* If there was a frequency transition before, the multiplier read from the
register corresponds to the current multiplier.
* If there was no frequency transition since reset, the field in the
register always reads as zero, regardless of the current multiplier that
is set using switches on the mainboard and that the CPU is running at.
The zero value corresponds to multiplier 4.5, so as a consequence, the
powernow-k6 driver always assumes multiplier 4.5.
For example, if we have 550MHz CPU with bus frequency 100MHz and
multiplier 5.5, the powernow-k6 driver thinks that the multiplier is 4.5
and bus frequency is 122MHz. The powernow-k6 driver then sets the
multiplier to 4.5, underclocking the CPU to 450MHz, but reports the
current frequency as 550MHz.
There is no reliable way how to read the initial multiplier. I modified
the driver so that it contains a table of known frequencies (based on
parameters of existing CPUs and some common overclocking schemes) and sets
the multiplier according to the frequency. If the frequency is unknown
(because of unusual overclocking or underclocking), the user must supply
the bus speed and maximum multiplier as module parameters.
This patch should be backported to all stable kernels. If it doesn't
apply cleanly, change it, or ask me to change it.
Signed-off-by: Mikulas Patocka <mpatocka@...hat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
Signed-off-by: Willy Tarreau <w@....eu>
---
arch/x86/kernel/cpu/cpufreq/powernow-k6.c | 76 +++++++++++++++++++++++++++++--
1 file changed, 72 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
index 9f80a34..2d9161e 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k6.c
@@ -26,6 +26,14 @@
static unsigned int busfreq; /* FSB, in 10 kHz */
static unsigned int max_multiplier;
+static unsigned int param_busfreq = 0;
+static unsigned int param_max_multiplier = 0;
+
+module_param_named(max_multiplier, param_max_multiplier, uint, S_IRUGO);
+MODULE_PARM_DESC(max_multiplier, "Maximum multiplier (allowed values: 20 30 35 40 45 50 55 60)");
+
+module_param_named(bus_frequency, param_busfreq, uint, S_IRUGO);
+MODULE_PARM_DESC(bus_frequency, "Bus frequency in kHz");
/* Clock ratio multiplied by 10 - see table 27 in AMD#23446 */
static struct cpufreq_frequency_table clock_ratio[] = {
@@ -40,6 +48,27 @@ static struct cpufreq_frequency_table clock_ratio[] = {
{0, CPUFREQ_TABLE_END}
};
+static const struct {
+ unsigned freq;
+ unsigned mult;
+} usual_frequency_table[] = {
+ { 400000, 40 }, // 100 * 4
+ { 450000, 45 }, // 100 * 4.5
+ { 475000, 50 }, // 95 * 5
+ { 500000, 50 }, // 100 * 5
+ { 506250, 45 }, // 112.5 * 4.5
+ { 533500, 55 }, // 97 * 5.5
+ { 550000, 55 }, // 100 * 5.5
+ { 562500, 50 }, // 112.5 * 5
+ { 570000, 60 }, // 95 * 6
+ { 600000, 60 }, // 100 * 6
+ { 618750, 55 }, // 112.5 * 5.5
+ { 660000, 55 }, // 120 * 5.5
+ { 675000, 60 }, // 112.5 * 6
+ { 720000, 60 }, // 120 * 6
+};
+
+#define FREQ_RANGE 3000
/**
* powernow_k6_get_cpu_multiplier - returns the current FSB multiplier
@@ -163,18 +192,57 @@ static int powernow_k6_target(struct cpufreq_policy *policy,
return 0;
}
-
static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
{
unsigned int i, f;
int result;
+ unsigned khz;
if (policy->cpu != 0)
return -ENODEV;
- /* get frequencies */
- max_multiplier = powernow_k6_get_cpu_multiplier();
- busfreq = cpu_khz / max_multiplier;
+ max_multiplier = 0;
+ khz = cpu_khz;
+ for (i = 0; i < ARRAY_SIZE(usual_frequency_table); i++) {
+ if (khz >= usual_frequency_table[i].freq - FREQ_RANGE &&
+ khz <= usual_frequency_table[i].freq + FREQ_RANGE) {
+ khz = usual_frequency_table[i].freq;
+ max_multiplier = usual_frequency_table[i].mult;
+ break;
+ }
+ }
+ if (param_max_multiplier) {
+ for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
+ if (clock_ratio[i].index == param_max_multiplier) {
+ max_multiplier = param_max_multiplier;
+ goto have_max_multiplier;
+ }
+ }
+ printk(KERN_ERR "powernow-k6: invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n");
+ return -EINVAL;
+ }
+
+ if (!max_multiplier) {
+ printk(KERN_WARNING "powernow-k6: unknown frequency %u, cannot determine current multiplier\n", khz);
+ printk(KERN_WARNING "powernow-k6: use module parameters max_multiplier and bus_frequency\n");
+ return -EOPNOTSUPP;
+ }
+
+have_max_multiplier:
+ param_max_multiplier = max_multiplier;
+
+ if (param_busfreq) {
+ if (param_busfreq >= 50000 && param_busfreq <= 150000) {
+ busfreq = param_busfreq / 10;
+ goto have_busfreq;
+ }
+ printk(KERN_ERR "powernow-k6: invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n");
+ return -EINVAL;
+ }
+
+ busfreq = khz / max_multiplier;
+have_busfreq:
+ param_busfreq = busfreq * 10;
/* table init */
for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) {
--
1.7.12.2.21.g234cd45.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists