linux-kernel - Re: [PATCH v2] ARM: dts: am335x-bone-common: Add i2c2 definition

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20140512195050.GB5668@atomide.com>
Date:	Mon, 12 May 2014 12:50:50 -0700
From:	Tony Lindgren <tony@...mide.com>
To:	Matt Ranostay <mranostay@...il.com>
Cc:	robh+dt@...nel.org, mark.rutland@....com, linux@....linux.org.uk,
	linux-omap@...r.kernel.org, devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org, pantelis.antoniou@...il.com,
	matt.porter@...aro.org
Subject: Re: [PATCH v2] ARM: dts: am335x-bone-common: Add i2c2 definition

* Matt Ranostay <mranostay@...il.com> [140509 18:43]:
> Add missing i2c2 bus define to access various cape and
> prototype/breakout board devices.
> 
> Signed-off-by: Matt Ranostay <mranostay@...il.com>
> ---
>  arch/arm/boot/dts/am335x-bone-common.dtsi | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
> index 2e7d932..5fdae2e 100644
> --- a/arch/arm/boot/dts/am335x-bone-common.dtsi
> +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
> @@ -84,6 +84,13 @@
>  		>;
>  	};
>  
> +	i2c2_pins: pinmux_i2c2_pins {
> +		pinctrl-single,pins = <
> +			0x178 (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_ctsn.i2c2_sda */
> +			0x17c (PIN_INPUT_PULLUP | MUX_MODE3)	/* uart1_rtsn.i2c2_scl */
> +		>;
> +	};
> +
>  	uart0_pins: pinmux_uart0_pins {
>  		pinctrl-single,pins = <
>  			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
>
> @@ -222,6 +229,15 @@
>  
>  };
>  
> +
> +&i2c2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c2_pins>;
> +
> +	status = "okay";
> +	clock-frequency = <100000>;
> +};
> +

If these pins are not used for i2c2 on some capes, this device
should be set to status = "disabled" state by default. Then
u-boot could re-enable it on the boards that have i2c2 in use.

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/