| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140513120121.27d41f76@canb.auug.org.au>
Date: Tue, 13 May 2014 12:01:21 +1000
From: Stephen Rothwell <sfr@...b.auug.org.au>
To: Benjamin Herrenschmidt <benh@...nel.crashing.org>,
<linuxppc-dev@...ts.ozlabs.org>
Cc: linux-next@...r.kernel.org, linux-kernel@...r.kernel.org,
Anton Blanchard <anton@...ba.org>
Subject: linux-next: manual merge of the powerpc tree with the fixes tree
Hi all,
Today's linux-next merge of the powerpc tree got a conflict in
arch/powerpc/kernel/exceptions-64s.S between commit 0be9d8b61c0c
("powerpc/ppc64: Allow allmodconfig to build (finally !)") from the
fixes tree and commits b1576fec7f4d ("powerpc: No need to use dot
symbols when branching to a function") and 354255014a90 ("powerpc:
Remove dot symbol usage in exception macros") from the powerpc tree.
I fixed it up (see below) and can carry the fix as necessary (no action
is required).
--
Cheers,
Stephen Rothwell sfr@...b.auug.org.au
diff --cc arch/powerpc/kernel/exceptions-64s.S
index 833a68dc4cc8,20f11eb4dff7..000000000000
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@@ -891,186 -1025,14 +891,186 @@@ END_FTR_SECTION_IFSET(CPU_FTR_CFAR
std r12,RESULT(r1)
std r11,STACK_FRAME_OVERHEAD-16(r1)
1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl .kernel_bad_stack
+ bl kernel_bad_stack
b 1b
+
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
+/*
+ * Data area reserved for FWNMI option.
+ * This address (0x7000) is fixed by the RPA.
+ */
+ .= 0x7000
+ .globl fwnmi_data_area
+fwnmi_data_area:
+
+ /* pseries and powernv need to keep the whole page from
+ * 0x7000 to 0x8000 free for use by the firmware
+ */
+ . = 0x8000
+#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
+
/*
- * Here r13 points to the paca, r9 contains the saved CR,
- * SRR0 and SRR1 are saved in r11 and r12,
- * r9 - r13 are saved in paca->exgen.
+ * Denorm interrupt assist moved out of line to here, where it remains
+ * close enough to the call site which uses a small conditional branch
*/
+#ifdef CONFIG_PPC_DENORMALISATION
+denorm_assist:
+BEGIN_FTR_SECTION
+/*
+ * To denormalise we need to move a copy of the register to itself.
+ * For POWER6 do that here for all FP regs.
+ */
+ mfmsr r10
+ ori r10,r10,(MSR_FP|MSR_FE0|MSR_FE1)
+ xori r10,r10,(MSR_FE0|MSR_FE1)
+ mtmsrd r10
+ sync
+
+#define FMR2(n) fmr (n), (n) ; fmr n+1, n+1
+#define FMR4(n) FMR2(n) ; FMR2(n+2)
+#define FMR8(n) FMR4(n) ; FMR4(n+4)
+#define FMR16(n) FMR8(n) ; FMR8(n+8)
+#define FMR32(n) FMR16(n) ; FMR16(n+16)
+ FMR32(0)
+
+FTR_SECTION_ELSE
+/*
+ * To denormalise we need to move a copy of the register to itself.
+ * For POWER7 do that here for the first 32 VSX registers only.
+ */
+ mfmsr r10
+ oris r10,r10,MSR_VSX@h
+ mtmsrd r10
+ sync
+
+#define XVCPSGNDP2(n) XVCPSGNDP(n,n,n) ; XVCPSGNDP(n+1,n+1,n+1)
+#define XVCPSGNDP4(n) XVCPSGNDP2(n) ; XVCPSGNDP2(n+2)
+#define XVCPSGNDP8(n) XVCPSGNDP4(n) ; XVCPSGNDP4(n+4)
+#define XVCPSGNDP16(n) XVCPSGNDP8(n) ; XVCPSGNDP8(n+8)
+#define XVCPSGNDP32(n) XVCPSGNDP16(n) ; XVCPSGNDP16(n+16)
+ XVCPSGNDP32(0)
+
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206)
+
+BEGIN_FTR_SECTION
+ b denorm_done
+END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
+/*
+ * To denormalise we need to move a copy of the register to itself.
+ * For POWER8 we need to do that for all 64 VSX registers
+ */
+ XVCPSGNDP32(32)
+denorm_done:
+ mtspr SPRN_HSRR0,r11
+ mtcrf 0x80,r9
+ ld r9,PACA_EXGEN+EX_R9(r13)
+ RESTORE_PPR_PACA(PACA_EXGEN, r10)
+BEGIN_FTR_SECTION
+ ld r10,PACA_EXGEN+EX_CFAR(r13)
+ mtspr SPRN_CFAR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ ld r11,PACA_EXGEN+EX_R11(r13)
+ ld r12,PACA_EXGEN+EX_R12(r13)
+ ld r13,PACA_EXGEN+EX_R13(r13)
+ HRFID
+ b .
+#endif
+
+/*
+ * An interrupt came in while soft-disabled. We set paca->irq_happened, then:
+ * - If it was a decrementer interrupt, we bump the dec to max and and return.
+ * - If it was a doorbell we return immediately since doorbells are edge
+ * triggered and won't automatically refire.
+ * - else we hard disable and return.
+ * This is called with r10 containing the value to OR to the paca field.
+ *
+ * Warning: This code is reached using a (small) conditional branch from both
+ * the 1st level exception handlers below 0x8000 and the alternate feature
+ * sections of that file which the linker puts right after the text in here.
+ *
+ * For that to work, we thus need this code to be roughly near the "middle"
+ * so that we can reach it with <32k offsets. Here works... for now.
+ */
+#define MASKED_INTERRUPT(_H) \
+masked_##_H##interrupt: \
+ std r11,PACA_EXGEN+EX_R11(r13); \
+ lbz r11,PACAIRQHAPPENED(r13); \
+ or r11,r11,r10; \
+ stb r11,PACAIRQHAPPENED(r13); \
+ cmpwi r10,PACA_IRQ_DEC; \
+ bne 1f; \
+ lis r10,0x7fff; \
+ ori r10,r10,0xffff; \
+ mtspr SPRN_DEC,r10; \
+ b 2f; \
+1: cmpwi r10,PACA_IRQ_DBELL; \
+ beq 2f; \
+ mfspr r10,SPRN_##_H##SRR1; \
+ rldicl r10,r10,48,1; /* clear MSR_EE */ \
+ rotldi r10,r10,16; \
+ mtspr SPRN_##_H##SRR1,r10; \
+2: mtcrf 0x80,r9; \
+ ld r9,PACA_EXGEN+EX_R9(r13); \
+ ld r10,PACA_EXGEN+EX_R10(r13); \
+ ld r11,PACA_EXGEN+EX_R11(r13); \
+ GET_SCRATCH0(r13); \
+ ##_H##rfid; \
+ b .
+
+ MASKED_INTERRUPT()
+ MASKED_INTERRUPT(H)
+
+/*
+ * Code from here down to __end_handlers is invoked from the
+ * exception prologs above. Because the prologs assemble the
+ * addresses of these handlers using the LOAD_HANDLER macro,
+ * which uses an ori instruction, these handlers must be in
+ * the first 64k of the kernel image.
+ */
+
+/*** Common interrupt handlers ***/
+
- STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception)
++ STD_EXCEPTION_COMMON(0x100, system_reset, system_reset_exception)
+
+ STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ)
- STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt)
- STD_EXCEPTION_COMMON(0x980, hdecrementer, .hdec_interrupt)
++ STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, timer_interrupt)
++ STD_EXCEPTION_COMMON(0x980, hdecrementer, hdec_interrupt)
+#ifdef CONFIG_PPC_DOORBELL
- STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .doorbell_exception)
++ STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, doorbell_exception)
+#else
- STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, .unknown_exception)
++ STD_EXCEPTION_COMMON_ASYNC(0xa00, doorbell_super, unknown_exception)
+#endif
- STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
- STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception)
- STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception)
- STD_EXCEPTION_COMMON(0xe40, emulation_assist, .emulation_assist_interrupt)
- STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception)
++ STD_EXCEPTION_COMMON(0xb00, trap_0b, unknown_exception)
++ STD_EXCEPTION_COMMON(0xd00, single_step, single_step_exception)
++ STD_EXCEPTION_COMMON(0xe00, trap_0e, unknown_exception)
++ STD_EXCEPTION_COMMON(0xe40, emulation_assist, emulation_assist_interrupt)
++ STD_EXCEPTION_COMMON(0xe60, hmi_exception, unknown_exception)
+#ifdef CONFIG_PPC_DOORBELL
- STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .doorbell_exception)
++ STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, doorbell_exception)
+#else
- STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, .unknown_exception)
++ STD_EXCEPTION_COMMON_ASYNC(0xe80, h_doorbell, unknown_exception)
+#endif
- STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception)
- STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception)
- STD_EXCEPTION_COMMON(0x1502, denorm, .unknown_exception)
++ STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, performance_monitor_exception)
++ STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, instruction_breakpoint_exception)
++ STD_EXCEPTION_COMMON(0x1502, denorm, unknown_exception)
+#ifdef CONFIG_ALTIVEC
- STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception)
++ STD_EXCEPTION_COMMON(0x1700, altivec_assist, altivec_assist_exception)
+#else
- STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception)
++ STD_EXCEPTION_COMMON(0x1700, altivec_assist, unknown_exception)
+#endif
+#ifdef CONFIG_CBE_RAS
- STD_EXCEPTION_COMMON(0x1200, cbe_system_error, .cbe_system_error_exception)
- STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, .cbe_maintenance_exception)
- STD_EXCEPTION_COMMON(0x1800, cbe_thermal, .cbe_thermal_exception)
++ STD_EXCEPTION_COMMON(0x1200, cbe_system_error, cbe_system_error_exception)
++ STD_EXCEPTION_COMMON(0x1600, cbe_maintenance, cbe_maintenance_exception)
++ STD_EXCEPTION_COMMON(0x1800, cbe_thermal, cbe_thermal_exception)
+#endif /* CONFIG_CBE_RAS */
+
+ /*
+ * Here r13 points to the paca, r9 contains the saved CR,
+ * SRR0 and SRR1 are saved in r11 and r12,
+ * r9 - r13 are saved in paca->exgen.
+ */
.align 7
.globl data_access_common
data_access_common:
@@@ -1109,10 -1071,73 +1109,10 @@@ instruction_access_common
ld r3,_NIP(r1)
andis. r4,r12,0x5820
li r5,0x400
- b .do_hash_page /* Try to handle as hpte fault */
+ b do_hash_page /* Try to handle as hpte fault */
- STD_EXCEPTION_COMMON(0xe20, h_instr_storage, .unknown_exception)
+ STD_EXCEPTION_COMMON(0xe20, h_instr_storage, unknown_exception)
-/*
- * Here is the common SLB miss user that is used when going to virtual
- * mode for SLB misses, that is currently not used
- */
-#ifdef __DISABLED__
- .align 7
- .globl slb_miss_user_common
-slb_miss_user_common:
- mflr r10
- std r3,PACA_EXGEN+EX_DAR(r13)
- stw r9,PACA_EXGEN+EX_CCR(r13)
- std r10,PACA_EXGEN+EX_LR(r13)
- std r11,PACA_EXGEN+EX_SRR0(r13)
- bl slb_allocate_user
-
- ld r10,PACA_EXGEN+EX_LR(r13)
- ld r3,PACA_EXGEN+EX_R3(r13)
- lwz r9,PACA_EXGEN+EX_CCR(r13)
- ld r11,PACA_EXGEN+EX_SRR0(r13)
- mtlr r10
- beq- slb_miss_fault
-
- andi. r10,r12,MSR_RI /* check for unrecoverable exception */
- beq- unrecov_user_slb
- mfmsr r10
-
-.machine push
-.machine "power4"
- mtcrf 0x80,r9
-.machine pop
-
- clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */
- mtmsrd r10,1
-
- mtspr SRR0,r11
- mtspr SRR1,r12
-
- ld r9,PACA_EXGEN+EX_R9(r13)
- ld r10,PACA_EXGEN+EX_R10(r13)
- ld r11,PACA_EXGEN+EX_R11(r13)
- ld r12,PACA_EXGEN+EX_R12(r13)
- ld r13,PACA_EXGEN+EX_R13(r13)
- rfid
- b .
-
-slb_miss_fault:
- EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN)
- ld r4,PACA_EXGEN+EX_DAR(r13)
- li r5,0
- std r4,_DAR(r1)
- std r5,_DSISR(r1)
- b handle_page_fault
-
-unrecov_user_slb:
- EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN)
- DISABLE_INTS
- bl save_nvgprs
-1: addi r3,r1,STACK_FRAME_OVERHEAD
- bl unrecoverable_exception
- b 1b
-
-#endif /* __DISABLED__ */
-
/*
* Machine check is different because we use a different
Download attachment "signature.asc" of type "application/pgp-signature" (837 bytes)
Powered by blists - more mailing lists