| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <6b206c541a7914dc79d9436cff1faea0e3f3ca4c.1399973152.git.jslaby@suse.cz>
Date: Tue, 13 May 2014 11:27:52 +0200
From: Jiri Slaby <jslaby@...e.cz>
To: stable@...r.kernel.org
Cc: linux-kernel@...r.kernel.org, Julius Werner <jwerner@...omium.org>,
Mathias Nyman <mathias.nyman@...ux.intel.com>,
Jiri Slaby <jslaby@...e.cz>
Subject: [PATCH 3.12 120/182] usb: xhci: Prefer endpoint context dequeue pointer over stopped_trb
From: Julius Werner <jwerner@...omium.org>
3.12-stable review patch. If anyone has any objections, please let me know.
===============
commit 1f81b6d22a5980955b01e08cf27fb745dc9b686f upstream.
We have observed a rare cycle state desync bug after Set TR Dequeue
Pointer commands on Intel LynxPoint xHCs (resulting in an endpoint that
doesn't fetch new TRBs and thus an unresponsive USB device). It always
triggers when a previous Set TR Dequeue Pointer command has set the
pointer to the final Link TRB of a segment, and then another URB gets
enqueued and cancelled again before it can be completed. Further
investigation showed that the xHC had returned the Link TRB in the TRB
Pointer field of the Transfer Event (CC == Stopped -- Length Invalid),
but when xhci_find_new_dequeue_state() later accesses the Endpoint
Context's TR Dequeue Pointer field it is set to the first TRB of the
next segment.
The driver expects those two values to be the same in this situation,
and uses the cycle state of the latter together with the address of the
former. This should be fine according to the XHCI specification, since
the endpoint ring should be stopped when returning the Transfer Event
and thus should not advance over the Link TRB before it gets restarted.
However, real-world XHCI implementations apparently don't really care
that much about these details, so the driver should follow a more
defensive approach to try to work around HC spec violations.
This patch removes the stopped_trb variable that had been used to store
the TRB Pointer from the last Transfer Event of a stopped TRB. Instead,
xhci_find_new_dequeue_state() now relies only on the Endpoint Context,
requiring a small amount of additional processing to find the virtual
address corresponding to the TR Dequeue Pointer. Some other parts of the
function were slightly rearranged to better fit into this model.
This patch should be backported to kernels as old as 2.6.31 that contain
the commit ae636747146ea97efa18e04576acd3416e2514f5 "USB: xhci: URB
cancellation support."
Signed-off-by: Julius Werner <jwerner@...omium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@...e.cz>
---
drivers/usb/host/xhci-ring.c | 67 ++++++++++++++++++++------------------------
drivers/usb/host/xhci.c | 1 -
drivers/usb/host/xhci.h | 2 --
3 files changed, 31 insertions(+), 39 deletions(-)
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 6bfbd80ec2b9..cbecb5ff7d90 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -556,6 +556,7 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
struct xhci_generic_trb *trb;
struct xhci_ep_ctx *ep_ctx;
dma_addr_t addr;
+ u64 hw_dequeue;
ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
ep_index, stream_id);
@@ -565,56 +566,57 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
stream_id);
return;
}
- state->new_cycle_state = 0;
- xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
- "Finding segment containing stopped TRB.");
- state->new_deq_seg = find_trb_seg(cur_td->start_seg,
- dev->eps[ep_index].stopped_trb,
- &state->new_cycle_state);
- if (!state->new_deq_seg) {
- WARN_ON(1);
- return;
- }
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Finding endpoint context");
ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
- state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq);
+ hw_dequeue = le64_to_cpu(ep_ctx->deq);
+
+ /* Find virtual address and segment of hardware dequeue pointer */
+ state->new_deq_seg = ep_ring->deq_seg;
+ state->new_deq_ptr = ep_ring->dequeue;
+ while (xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr)
+ != (dma_addr_t)(hw_dequeue & ~0xf)) {
+ next_trb(xhci, ep_ring, &state->new_deq_seg,
+ &state->new_deq_ptr);
+ if (state->new_deq_ptr == ep_ring->dequeue) {
+ WARN_ON(1);
+ return;
+ }
+ }
+ /*
+ * Find cycle state for last_trb, starting at old cycle state of
+ * hw_dequeue. If there is only one segment ring, find_trb_seg() will
+ * return immediately and cannot toggle the cycle state if this search
+ * wraps around, so add one more toggle manually in that case.
+ */
+ state->new_cycle_state = hw_dequeue & 0x1;
+ if (ep_ring->first_seg == ep_ring->first_seg->next &&
+ cur_td->last_trb < state->new_deq_ptr)
+ state->new_cycle_state ^= 0x1;
state->new_deq_ptr = cur_td->last_trb;
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Finding segment containing last TRB in TD.");
state->new_deq_seg = find_trb_seg(state->new_deq_seg,
- state->new_deq_ptr,
- &state->new_cycle_state);
+ state->new_deq_ptr, &state->new_cycle_state);
if (!state->new_deq_seg) {
WARN_ON(1);
return;
}
+ /* Increment to find next TRB after last_trb. Cycle if appropriate. */
trb = &state->new_deq_ptr->generic;
if (TRB_TYPE_LINK_LE32(trb->field[3]) &&
(trb->field[3] & cpu_to_le32(LINK_TOGGLE)))
state->new_cycle_state ^= 0x1;
next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
- /*
- * If there is only one segment in a ring, find_trb_seg()'s while loop
- * will not run, and it will return before it has a chance to see if it
- * needs to toggle the cycle bit. It can't tell if the stalled transfer
- * ended just before the link TRB on a one-segment ring, or if the TD
- * wrapped around the top of the ring, because it doesn't have the TD in
- * question. Look for the one-segment case where stalled TRB's address
- * is greater than the new dequeue pointer address.
- */
- if (ep_ring->first_seg == ep_ring->first_seg->next &&
- state->new_deq_ptr < dev->eps[ep_index].stopped_trb)
- state->new_cycle_state ^= 0x1;
+ /* Don't update the ring cycle state for the producer (us). */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"Cycle state = 0x%x", state->new_cycle_state);
- /* Don't update the ring cycle state for the producer (us). */
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"New dequeue segment = %p (virtual)",
state->new_deq_seg);
@@ -802,7 +804,6 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
if (list_empty(&ep->cancelled_td_list)) {
xhci_stop_watchdog_timer_in_irq(xhci, ep);
ep->stopped_td = NULL;
- ep->stopped_trb = NULL;
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
return;
}
@@ -870,11 +871,9 @@ remove_finished_td:
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
}
- /* Clear stopped_td and stopped_trb if endpoint is not halted */
- if (!(ep->ep_state & EP_HALTED)) {
+ /* Clear stopped_td if endpoint is not halted */
+ if (!(ep->ep_state & EP_HALTED))
ep->stopped_td = NULL;
- ep->stopped_trb = NULL;
- }
/*
* Drop the lock and complete the URBs in the cancelled TD list.
@@ -1870,14 +1869,12 @@ static void xhci_cleanup_halted_endpoint(struct xhci_hcd *xhci,
struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
ep->ep_state |= EP_HALTED;
ep->stopped_td = td;
- ep->stopped_trb = event_trb;
ep->stopped_stream = stream_id;
xhci_queue_reset_ep(xhci, slot_id, ep_index);
xhci_cleanup_stalled_ring(xhci, td->urb->dev, ep_index);
ep->stopped_td = NULL;
- ep->stopped_trb = NULL;
ep->stopped_stream = 0;
xhci_ring_cmd_db(xhci);
@@ -1959,7 +1956,6 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
* the ring dequeue pointer or take this TD off any lists yet.
*/
ep->stopped_td = td;
- ep->stopped_trb = event_trb;
return 0;
} else {
if (trb_comp_code == COMP_STALL) {
@@ -1971,7 +1967,6 @@ static int finish_td(struct xhci_hcd *xhci, struct xhci_td *td,
* USB class driver clear the stall later.
*/
ep->stopped_td = td;
- ep->stopped_trb = event_trb;
ep->stopped_stream = ep_ring->stream_id;
} else if (xhci_requires_manual_halt_cleanup(xhci,
ep_ctx, trb_comp_code)) {
@@ -2588,7 +2583,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
* successful event after a short transfer.
* Ignore it.
*/
- if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) &&
+ if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) &&
ep_ring->last_td_was_short) {
ep_ring->last_td_was_short = false;
ret = 0;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index f07f32b5a526..01aa4c9fa558 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2932,7 +2932,6 @@ void xhci_endpoint_reset(struct usb_hcd *hcd,
xhci_ring_cmd_db(xhci);
}
virt_ep->stopped_td = NULL;
- virt_ep->stopped_trb = NULL;
virt_ep->stopped_stream = 0;
spin_unlock_irqrestore(&xhci->lock, flags);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index ed3a425de8ce..75f775c993ee 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -864,8 +864,6 @@ struct xhci_virt_ep {
#define EP_GETTING_NO_STREAMS (1 << 5)
/* ---- Related to URB cancellation ---- */
struct list_head cancelled_td_list;
- /* The TRB that was last reported in a stopped endpoint ring */
- union xhci_trb *stopped_trb;
struct xhci_td *stopped_td;
unsigned int stopped_stream;
/* Watchdog timer for stop endpoint command to cancel URBs */
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists