| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1399995862-17788-8-git-send-email-maxime.ripard@free-electrons.com>
Date: Tue, 13 May 2014 17:44:21 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Emilio Lopez <emilio@...pez.com.ar>,
Mike Turquette <mturquette@...aro.org>,
stern@...land.harvard.edu, kishon@...com, hdegoede@...hat.com,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: Boris Brezillon <boris@...e-electrons.com>,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-usb@...r.kernel.org, kevin.z.m.zh@...il.com,
sunny@...winnertech.com, shuge@...winnertech.com,
zhuzhenhua@...winnertech.com, linux-sunxi@...glegroups.com,
Maxime Ripard <maxime.ripard@...e-electrons.com>
Subject: [PATCH RESEND v4 7/8] ARM: sun6i: dt: Add support for the USB controllers
The A31 has two ECHI/OHCI controllers, and one OHCI-only phy-less controller.
Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@...hat.com>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 77 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 77 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 13aa56ed5858..5e9f01af6d99 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -341,6 +341,83 @@
status = "disabled";
};
+ usbphy: phy@...19400 {
+ compatible = "allwinner,sun6i-a31-usb-phy";
+ reg = <0x01c19400 0x10>,
+ <0x01c1a800 0x4>,
+ <0x01c1b800 0x4>;
+ reg-names = "phy_ctrl",
+ "pmu1",
+ "pmu2";
+ clocks = <&usb_clk 8>,
+ <&usb_clk 9>,
+ <&usb_clk 10>;
+ clock-names = "usb0_phy",
+ "usb1_phy",
+ "usb2_phy";
+ resets = <&usb_clk 0>,
+ <&usb_clk 1>,
+ <&usb_clk 2>;
+ reset-names = "usb0_reset",
+ "usb1_reset",
+ "usb2_reset";
+ status = "disabled";
+ #phy-cells = <1>;
+ };
+
+ ehci0: usb@...1a000 {
+ compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+ reg = <0x01c1a000 0x100>;
+ interrupts = <0 72 4>;
+ clocks = <&ahb1_gates 26>;
+ resets = <&ahb1_rst 26>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci0: usb@...1a400 {
+ compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+ reg = <0x01c1a400 0x100>;
+ interrupts = <0 73 4>;
+ clocks = <&ahb1_gates 29>, <&usb_clk 16>;
+ resets = <&ahb1_rst 29>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ehci1: usb@...1b000 {
+ compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
+ reg = <0x01c1b000 0x100>;
+ interrupts = <0 74 4>;
+ clocks = <&ahb1_gates 27>;
+ resets = <&ahb1_rst 27>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci1: usb@...1b400 {
+ compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+ reg = <0x01c1b400 0x100>;
+ interrupts = <0 75 4>;
+ clocks = <&ahb1_gates 30>, <&usb_clk 17>;
+ resets = <&ahb1_rst 30>;
+ phys = <&usbphy 2>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ ohci2: usb@...1c000 {
+ compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
+ reg = <0x01c1c400 0x100>;
+ interrupts = <0 77 4>;
+ clocks = <&ahb1_gates 31>, <&usb_clk 18>;
+ resets = <&ahb1_rst 31>;
+ status = "disabled";
+ };
+
pio: pinctrl@...20800 {
compatible = "allwinner,sun6i-a31-pinctrl";
reg = <0x01c20800 0x400>;
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists