[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1400060942-10588-7-git-send-email-antoine.tenart@free-electrons.com>
Date: Wed, 14 May 2014 11:49:02 +0200
From: Antoine Ténart
<antoine.tenart@...e-electrons.com>
To: sebastian.hesselbarth@...il.com, tj@...nel.org, kishon@...com
Cc: Antoine Ténart
<antoine.tenart@...e-electrons.com>,
alexandre.belloni@...e-electrons.com,
thomas.petazzoni@...e-electrons.com, zmxu@...vell.com,
jszhang@...vell.com, linux-arm-kernel@...ts.infradead.org,
linux-ide@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v3 6/6] ARM: berlin: enable the eSATA interface on the BG2Q DMP
The BG2Q has an AHCI SATA controller with an eSATA interface. Enable it.
Also use the SATA PHY 0, the BG2Q DMP does not has the SATA PHY 1.
Signed-off-by: Antoine Ténart <antoine.tenart@...e-electrons.com>
---
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index 2da9c41e29d8..e5c9012babc6 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -26,3 +26,13 @@
&uart0 {
status = "okay";
};
+
+&ahci {
+ phys = <&sata_phy0>;
+ phy-names = "port0";
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists