| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CADYTM3bfnhCVi8VKiypMsQOndmzG-=yPksYNV+qZ8X73LPTZog@mail.gmail.com>
Date: Wed, 14 May 2014 11:43:25 -0500
From: Bin Liu <binmlist@...il.com>
To: George Cherian <george.cherian@...com>
Cc: Daniel Mack <zonque@...il.com>, linux-kernel@...r.kernel.org,
linux-usb@...r.kernel.org, linux-omap@...r.kernel.org,
balbi@...com, gregkh@...uxfoundation.org
Subject: Re: [PATCH v3 0/5] Add support for SW babble Control
George,
On Wed, May 14, 2014 at 9:34 AM, Bin Liu <binmlist@...il.com> wrote:
> George,
>
> On Wed, May 14, 2014 at 12:37 AM, George Cherian <george.cherian@...com> wrote:
>> On 5/14/2014 12:07 AM, Bin Liu wrote:
>>>
>>> Hi,
>>>
>>> On Tue, May 13, 2014 at 8:24 AM, George Cherian <george.cherian@...com>
>>> wrote:
>>>>
>>>> Hi Daniel,
>>>>
>>>>
>>>> On 5/13/2014 6:44 PM, Daniel Mack wrote:
>>>>>
>>>>> Hi George,
>>>>>
>>>>> On 05/13/2014 02:57 PM, George Cherian wrote:
>>>>>>
>>>>>> I never enabled the MUSB_BABBLE_SW_SESSION_CTRL in the MUSB_BABBLE_CTL
>>>>>> reg.
>>>>>> can you try with the following patch.
>>>>>>
>>>>>> diff --git a/drivers/usb/musb/musb_dsps.c
>>>>>> b/drivers/usb/musb/musb_dsps.c
>>>>>> index 1ae6681..1160cd1 100644
>>>>>> --- a/drivers/usb/musb/musb_dsps.c
>>>>>> +++ b/drivers/usb/musb/musb_dsps.c
>>>>>> @@ -477,8 +477,11 @@ static int dsps_musb_init(struct musb *musb)
>>>>>> * logic enabled.
>>>>>> */
>>>>>> val = dsps_readb(musb->mregs, MUSB_BABBLE_CTL);
>>>>>> - if (val == MUSB_BABBLE_RCV_DISABLE)
>>>>>> + if (val == MUSB_BABBLE_RCV_DISABLE) {
>>>>>> glue->sw_babble_enabled = true;
>>>>>> + val |= MUSB_BABBLE_SW_SESSION_CTRL;
>>>>>> + dsps_writeb(musb->mregs, MUSB_BABBLE_CTL, val);
>>>>>> + }
>>>>>> ret = dsps_musb_dbg_init(musb, glue);
>>>>>> if (ret)
>>>>>
>>>>> MUSB_BABBLE_STUCK_J still remains unset, so I get the same result as
>>>>> without the patch: a full glue reset is conducted. Do I get you right
>>>>> that you expect MUSB_BABBLE_STUCK_J to be set in babble conditions when
>>>>> MUSB_BABBLE_SW_SESSION_CTRL is set?
>>>>>
>>>> Basically, there are 2 types of babble conditions.
>>>> 1) Transient babble condition - which could be recovered from without an
>>>> IP
>>>> reset .
>>>> 2) Babble condition - which could be recovered from only by doing an IP
>>>> reset.
>>>>
>>>> Looks like you are always hitting case 2 (Most times am also hitting the
>>>> same).
>>>> Case 1 is really hard to reproduce. I don't have a reliable method as of
>>>> now
>>>> to
>>>> reproduce this case consistently.
>>>>
>>>>> [ 19.672373] CAUTION: musb: Babble Interrupt Occurred
>>>>> [ 19.677776] musb_stage0_irq 789: unhandled DISCONNECT transition
>>>>> (a_wait_bcon)
>>>>> [ 19.685815] usb 1-1: USB disconnect, device number 3
>>>>> [ 19.769720] musb-hdrc musb-hdrc.0.auto: babble: MUSB_BABBLE_CTL value
>>>>> 44
>>>>> [ 19.776765] musb-hdrc musb-hdrc.0.auto: STUCK_J is reset
>>>>>
>>>>>
>>>>> I don't quite follow, especially as I lack documentation of the IP core.
>>>>> How do you test babble errors, is there any way to force them to happen
>>>>> reliably?
>>>>
>>>>
>>>> There is no 100% reliable method to force it to happen. Following is
>>>
>>> I have a way to force babble happen reliably - shorting DP or DM to
>>> VBUS. I opened the far-end plug of the USB cable, so I can easily
>>> short DP or DM to VBUS.
>>
>> Good to know that you have a reliable way to test babble condition.
>> Can you please do a quick test on 3.15.0-rc4 with the series applied?
>> In case of any assistance please do let me know.
>
> Sure, but could you please re-send those patches to my corporate email
> so that I can apply them from Thunderbird?
You don't have to resend the patches. Nishanth Menon showed me a way
to extract the patch from Gmail - Thanks Nishanth.
But which repo do you want to me test with? The first patch ([PATCH v2
1/5] usb: musb: core: Convert babble recover work to delayed work)
does not apply to v3.15-rc4 tag. the current musb_core.c does not have
the recovery work for musb. Please let me know what I missed.
Thanks,
-Bin.
>
> I read these linux-usb emails in Gmail, and am not aware of any easy
> way to extract patches from Gmail.
>
> BTY, I tested with TI 3.12.10 kernel, in which I guess the babble
> handling is similar to this patch set. With TI3.12.10, MISC is always
> 0x64, so MUSB never restarts.
>
> Thanks,
> -Bin.
>
>>
>>> But the interesting thing is that with TI 3.2 kernel, shorting DP or
>>> DM to VBUS causes MISC register to be 0x4, but the result is
>>> completely opposite in TI 3.12.10 kernel, which cause MISC to be 0x64.
>>>
>>> So in the 3.2 kernel, the babble handing resets the controller, but
>>> the 3.12.10 does not.
>>>
>>> Regards,
>>> -Bin.
>>>
>>>> my setup ,
>>>> I have a HUB with 4 devices connected , which gives me a Babble interrupt
>>>> on both connects and disconnects ( Not always though).
>>>>
>>>>> Anyway, the full glue layer solves this rare condition quite well for
>>>>> me. Is there any downside of this?
>>>>>
>>>>>
>>>>> Daniel
>>>>>
>>>>
>>>> --
>>>> -George
>>>>
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>>>>
>>>> the body of a message to majordomo@...r.kernel.org
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>>
>>
>> --
>> -George
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists