[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1400146660-30261-1-git-send-email-srinivas.kandagatla@linaro.org>
Date: Thu, 15 May 2014 10:37:40 +0100
From: srinivas.kandagatla@...aro.org
To: Russell King <linux@....linux.org.uk>,
Ulf Hansson <ulf.hansson@...aro.org>, linux-mmc@...r.kernel.org
Cc: Chris Ball <chris@...ntf.net>, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linus.walleij@...aro.org,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Subject: [PATCH v2 11/14] mmc: mmci: Add support to data commands via variant structure.
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
On some SOCs like Qcom there are explicit bits in the command register
to specify if its a data transfer command or not. So this patch adds
support to such bits in variant data, giving more flexibility to the
driver.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
---
drivers/mmc/host/mmci.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 0a0fc22..05ae654 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -59,6 +59,7 @@ static unsigned int fmax = 515633;
* is asserted (likewise for RX)
* @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY
* is asserted (likewise for RX)
+ * @data_cmd_enable: enable value for data commands.
* @sdio: variant supports SDIO
* @st_clkdiv: true if using a ST-specific clock divider algorithm
* @datactrl_mask_ddrmode: ddr mode mask in datactrl register.
@@ -81,6 +82,7 @@ struct variant_data {
unsigned int datalength_bits;
unsigned int fifosize;
unsigned int fifohalfsize;
+ unsigned int data_cmd_enable;
unsigned int datactrl_mask_ddrmode;
bool sdio;
bool st_clkdiv;
@@ -188,6 +190,7 @@ static struct variant_data variant_qcom = {
.clkreg_enable = MCI_QCOM_CLK_FLOWENA,
.clkreg_8bit_bus_enable = MCI_QCOM_CLK_WIDEBUS_8,
.datactrl_mask_ddrmode = MCI_QCOM_CLK_DDR_MODE,
+ .data_cmd_enable = MCI_QCOM_CSPM_DATCMD,
.blksz_datactrl4 = true,
.datalength_bits = 24,
.blksz_datactrl4 = true,
@@ -874,6 +877,9 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
if (/*interrupt*/0)
c |= MCI_CPSM_INTERRUPT;
+ if (mmc_cmd_type(cmd) == MMC_CMD_ADTC)
+ c |= host->variant->data_cmd_enable;
+
host->cmd = cmd;
mmci_writel(host, cmd->arg, MMCIARGUMENT);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists