lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Fri, 16 May 2014 05:57:57 +0800
From:	Zhuang Jin Can <jin.can.zhuang@...el.com>
To:	Felipe Balbi <balbi@...com>
Cc:	USB list <linux-usb@...r.kernel.org>, linux-omap@...r.kernel.org,
	Kernel development list <linux-kernel@...r.kernel.org>,
	david.a.cohen@...ux.intel.com, Yuan@...el.com,
	Hang <hang.yuan@...el.com>, Zhuang@...el.com,
	Jin Can <jin.can.zhuang@...el.com>, Li@...el.com,
	Jiebing <jiebing.li@...el.com>
Subject: [PATCH] usb: dwc3: gadget: check link trb after free_slot is
 increased

In ISOC transfers, when free_slot points to the last TRB (i.e. Link
TRB), and all queued requests meet Missed Interval Isoc error, busy_slot
points to trb0.
	busy_slot->trb0
		   trb1
		   ...
	free_slot->trb31(Link TRB)

After end transfer and receiving the XferNotReady event, trb_left is
caculated as 1 which is wrong, and no TRB will be primed to the
endpoint.

The root cause is free_slot is not increased the same way as busy_slot.
When busy_slot is increased by one, it checks if points to a link TRB
after increasement, but free_slot checks it before increasement.
free_slot should behave the same as busy_slot to make the trb_left
caculation correct.

Signed-off-by: Zhuang Jin Can <jin.can.zhuang@...el.com>
Signed-off-by: Jiebing Li <jiebing.li@...el.com>
---
 drivers/usb/dwc3/gadget.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 54da8c8..2ebe82b 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -828,10 +828,6 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 			length, last ? " last" : "",
 			chain ? " chain" : "");
 
-	/* Skip the LINK-TRB on ISOC */
-	if (((dep->free_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
-			usb_endpoint_xfer_isoc(dep->endpoint.desc))
-		dep->free_slot++;
 
 	trb = &dep->trb_pool[dep->free_slot & DWC3_TRB_MASK];
 
@@ -843,6 +839,10 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 	}
 
 	dep->free_slot++;
+	/* Skip the LINK-TRB on ISOC */
+	if (((dep->free_slot & DWC3_TRB_MASK) == DWC3_TRB_NUM - 1) &&
+			usb_endpoint_xfer_isoc(dep->endpoint.desc))
+		dep->free_slot++;
 
 	trb->size = DWC3_TRB_SIZE_LENGTH(length);
 	trb->bpl = lower_32_bits(dma);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ