Message-ID: <1400169692-9677-4-git-send-email-m-karicheri2@ti.com>
Date:	Thu, 15 May 2014 12:01:30 -0400
From:	Murali Karicheri <m-karicheri2@...com>
To:	<linux-kernel@...r.kernel.org>, <linux-pci@...r.kernel.org>,
	<linux-arm-kernel@...ts.infradead.org>
CC:	Murali Karicheri <m-karicheri2@...com>,
	Grant Likely <grant.likely@...aro.org>,
	Rob Herring <robh+dt@...nel.org>,
	Mohit Kumar <mohit.kumar@...com>,
	Jingoo Han <jg1.han@...sung.com>,
	Bjorn Helgaas <bhelgaas@...gle.com>
Subject: [PATCH v1 3/5] phy: pci serdes phy driver for keystone

This phy driver is used by keystone PCI driver. The hw vendor that
provides the phy hw published only registers and their values. So
this driver uses these hard coded values to initialize the phy.

CC: Grant Likely <grant.likely@...aro.org>
CC: Rob Herring <robh+dt@...nel.org>
CC: Mohit Kumar <mohit.kumar@...com>
CC: Jingoo Han <jg1.han@...sung.com>
CC: Bjorn Helgaas <bhelgaas@...gle.com>

Signed-off-by: Murali Karicheri <m-karicheri2@...com>
---
 drivers/phy/Kconfig        |    6 ++
 drivers/phy/Makefile       |    1 +
 drivers/phy/phy-keystone.c |  230 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 237 insertions(+)
 create mode 100644 drivers/phy/phy-keystone.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 4906c27..e5f4b5a 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -167,4 +167,10 @@ config PHY_XGENE
 	help
 	  This option enables support for APM X-Gene SoC multi-purpose PHY.
 
+config PHY_TI_KEYSTONE
+	bool "TI Keystone PHY support"
+	depends on ARCH_KEYSTONE
+	select GENERIC_PHY
+	help
+	  This option enables support for TI Keystone PHY (serdes).
 endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 7728518..bd306a7 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -19,3 +19,4 @@ phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2)	+= phy-exynos4210-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2)	+= phy-exynos4x12-usb2.o
 phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2)	+= phy-exynos5250-usb2.o
 obj-$(CONFIG_PHY_XGENE)			+= phy-xgene.o
+obj-$(CONFIG_PHY_TI_KEYSTONE)		+= phy-keystone.o
diff --git a/drivers/phy/phy-keystone.c b/drivers/phy/phy-keystone.c
new file mode 100644
index 0000000..ba1b9fa
--- /dev/null
+++ b/drivers/phy/phy-keystone.c
@@ -0,0 +1,230 @@
+/*
+ * PCIe Keystone platform specific driver code
+ *
+ * Copyright (C) 2013-2014 Texas Instruments, Inc.
+ *		http://www.ti.com
+ *
+ * Author: Murali Karicheri <m-karicheri2@...com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define reg_dump(addr, mask) \
+		pr_debug("reg %p has value %x\n", (void *)addr, \
+			(readl(addr) & ~mask))
+
+/* mask bits point to bits being modified */
+#define reg_rmw(addr, value, mask) \
+		writel(((readl(addr) & (~(mask))) | \
+			(value & (mask))), (addr))
+struct serdes_config {
+	u32 reg;
+	u32 val;
+	u32 mask;
+};
+
+struct phy_keystone {
+	struct device *dev;
+	void __iomem *base;
+};
+
+static struct serdes_config ks_100mhz_pcie_5gbps_serdes[] = {
+	{0x0000, 0x00000800, 0x0000ff00},
+	{0x0060, 0x00041c5c, 0x00ffffff},
+	{0x0064, 0x0343c700, 0xffffff00},
+	{0x006c, 0x00000012, 0x000000ff},
+	{0x0068, 0x00070000, 0x00ff0000},
+	{0x0078, 0x0000c000, 0x0000ff00},
+
+	{0x0200, 0x00000000, 0x000000ff},
+	{0x0204, 0x5e000080, 0xff0000ff},
+	{0x0208, 0x00000006, 0x000000ff},
+	{0x0210, 0x00000023, 0x000000ff},
+	{0x0214, 0x2e003060, 0xff00ffff},
+	{0x0218, 0x76000000, 0xff000000},
+	{0x022c, 0x00200002, 0x00ff00ff},
+	{0x02a0, 0xffee0000, 0xffff0000},
+	{0x02a4, 0x0000000f, 0x000000ff},
+	{0x0204, 0x5e000000, 0xff000000},
+	{0x0208, 0x00000006, 0x000000ff},
+	{0x0278, 0x00002000, 0x0000ff00},
+	{0x0280, 0x00280028, 0x00ff00ff},
+	{0x0284, 0x2d0f0385, 0xffffffff},
+	{0x0250, 0xd0000000, 0xff000000},
+	{0x0284, 0x00000085, 0x000000ff},
+	{0x0294, 0x20000000, 0xff000000},
+
+	{0x0400, 0x00000000, 0x000000ff},
+	{0x0404, 0x5e000080, 0xff0000ff},
+	{0x0408, 0x00000006, 0x000000ff},
+	{0x0410, 0x00000023, 0x000000ff},
+	{0x0414, 0x2e003060, 0xff00ffff},
+	{0x0418, 0x76000000, 0xff000000},
+	{0x042c, 0x00200002, 0x00ff00ff},
+	{0x04a0, 0xffee0000, 0xffff0000},
+	{0x04a4, 0x0000000f, 0x000000ff},
+	{0x0404, 0x5e000000, 0xff000000},
+	{0x0408, 0x00000006, 0x000000ff},
+	{0x0478, 0x00002000, 0x0000ff00},
+	{0x0480, 0x00280028, 0x00ff00ff},
+	{0x0484, 0x2d0f0385, 0xffffffff},
+	{0x0450, 0xd0000000, 0xff000000},
+	{0x0494, 0x20000000, 0xff000000},
+
+	{0x0604, 0x00000080, 0x000000ff},
+	{0x0600, 0x00000000, 0x000000ff},
+	{0x0604, 0x5e000000, 0xff000000},
+	{0x0608, 0x00000006, 0x000000ff},
+	{0x0610, 0x00000023, 0x000000ff},
+	{0x0614, 0x2e003060, 0xff00ffff},
+	{0x0618, 0x76000000, 0xff000000},
+	{0x062c, 0x00200002, 0x00ff00ff},
+	{0x06a0, 0xffee0000, 0xffff0000},
+	{0x06a4, 0x0000000f, 0x000000ff},
+	{0x0604, 0x5e000000, 0xff000000},
+	{0x0608, 0x00000006, 0x000000ff},
+	{0x0678, 0x00002000, 0x0000ff00},
+	{0x0680, 0x00280028, 0x00ff00ff},
+	{0x0684, 0x2d0f0385, 0xffffffff},
+	{0x0650, 0xd0000000, 0xff000000},
+	{0x0694, 0x20000000, 0xff000000},
+
+	{0x0800, 0x00000000, 0x000000ff},
+	{0x0804, 0x5e000080, 0xff0000ff},
+	{0x0808, 0x00000006, 0x000000ff},
+	{0x0810, 0x00000023, 0x000000ff},
+	{0x0814, 0x2e003060, 0xff00ffff},
+	{0x0818, 0x76000000, 0xff000000},
+	{0x082c, 0x00200002, 0x00ff00ff},
+	{0x08a0, 0xffee0000, 0xffff0000},
+	{0x08a4, 0x0000000f, 0x000000ff},
+	{0x0804, 0x5e000000, 0xff000000},
+	{0x0808, 0x00000006, 0x000000ff},
+	{0x0878, 0x00002000, 0x0000ff00},
+	{0x0880, 0x00280028, 0x00ff00ff},
+	{0x0884, 0x2d0f0385, 0xffffffff},
+	{0x0850, 0xd0000000, 0xff000000},
+	{0x0894, 0x20000000, 0xff000000},
+
+	{0x0a00, 0x00000100, 0x0000ff00},
+	{0x0a08, 0x00e12c08, 0x00ffffff},
+	{0x0a0c, 0x00000081, 0x000000ff},
+	{0x0a18, 0x00e80000, 0x00ff0000},
+	{0x0a30, 0x002f2f00, 0x00ffff00},
+	{0x0a4c, 0xac820000, 0xffff0000},
+	{0x0a54, 0xc0000000, 0xff000000},
+	{0x0a58, 0x00001441, 0x0000ffff},
+	{0x0a84, 0x00000301, 0x0000ffff},
+
+	{0x0a8c, 0x81030000, 0xffff0000},
+	{0x0a90, 0x00006001, 0x0000ffff},
+	{0x0a94, 0x01000000, 0xff000000},
+	{0x0aa0, 0x81000000, 0xff000000},
+	{0x0abc, 0xff000000, 0xff000000},
+	{0x0ac0, 0x0000008b, 0x000000ff},
+
+	{0x0000, 0x00000003, 0x000000ff},
+	{0x0a00, 0x0000009f, 0x000000ff},
+
+	{0x0a44, 0x5f733d00, 0xffffff00},
+	{0x0a48, 0x00fdca00, 0x00ffff00},
+	{0x0a5c, 0x00000000, 0xffff0000},
+	{0x0a60, 0x00008000, 0xffffffff},
+	{0x0a64, 0x0c581220, 0xffffffff},
+	{0x0a68, 0xe13b0602, 0xffffffff},
+	{0x0a6c, 0xb8074cc1, 0xffffffff},
+	{0x0a70, 0x3f02e989, 0xffffffff},
+	{0x0a74, 0x00000001, 0x000000ff},
+	{0x0b14, 0x00370000, 0x00ff0000},
+	{0x0b10, 0x37000000, 0xff000000},
+	{0x0b14, 0x0000005d, 0x000000ff},
+};
+
+static int ks_phy_init(struct phy *phy)
+{
+	struct serdes_config *p;
+	struct phy_keystone *ks_phy = phy_get_drvdata(phy);
+
+	int i;
+
+	for (i = 0, p = &ks_100mhz_pcie_5gbps_serdes[0];
+		i < ARRAY_SIZE(ks_100mhz_pcie_5gbps_serdes);
+		i++, p++) {
+		reg_rmw((ks_phy->base + p->reg), p->val, p->mask);
+		reg_dump((ks_phy->base + p->reg), p->mask);
+	}
+	udelay(2000);
+
+	return 0;
+}
+
+static struct phy_ops ks_phy_ops = {
+	.init		= ks_phy_init,
+	.owner		= THIS_MODULE,
+};
+
+static int ks_phy_probe(struct platform_device *pdev)
+{
+	struct phy_provider *phy_provider;
+	struct device *dev = &pdev->dev;
+	struct phy_keystone *ks_phy;
+	struct phy *phy;
+	struct resource *res;
+
+	ks_phy = devm_kzalloc(dev, sizeof(*ks_phy), GFP_KERNEL);
+	if (!ks_phy)
+		return -ENOMEM;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "reg_serdes");
+	ks_phy->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(ks_phy->base))
+		return PTR_ERR(ks_phy->base);
+
+	ks_phy->dev = dev;
+	phy = devm_phy_create(dev, &ks_phy_ops, NULL);
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	phy_set_drvdata(phy, ks_phy);
+	phy_provider = devm_of_phy_provider_register(ks_phy->dev,
+				of_phy_simple_xlate);
+
+	if (IS_ERR(phy_provider))
+		return PTR_ERR(phy_provider);
+
+	dev_info(dev, "keystone phy initialized\n");
+	return 0;
+}
+
+static const struct of_device_id ks_phy_of_match[] = {
+	{ .compatible = "ti,keystone-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, ks_phy_of_match);
+
+static struct platform_driver ks_phy_driver = {
+	.probe	= ks_phy_probe,
+	.driver = {
+		.of_match_table	= ks_phy_of_match,
+		.name  = "ti,keystone-phy",
+		.owner = THIS_MODULE,
+	}
+};
+module_platform_driver(ks_phy_driver);
+
+MODULE_DESCRIPTION("TI Keystone SerDes PHY driver");
+MODULE_LICENSE("GPL V2");
+MODULE_AUTHOR("Murali Karicheri <m-karicheri2@...com>");
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists