[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.15.0-rc5-Inari (root@devpool02) (gcc version 4.8.2 (Emlix Linux Inari) ) #1 SMP Fri May 16 08:25:11 UTC 2014 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable [ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000078345fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078346000-0x0000000078c45fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000078c46000-0x0000000078d45fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000078d46000-0x0000000078d85fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000078d86000-0x00000000794c7fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000794c8000-0x0000000079dc7fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000079dc8000-0x0000000079ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd00000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! [ 0.000000] efi: EFI v2.31 by INSYDE Corp. [ 0.000000] efi: ACPI 2.0=0x78d85014 SMBIOS=0x78c45000 [ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB) [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x000000000008f000) (0MB) [ 0.000000] efi: mem03: type=10, attr=0xf, range=[0x000000000008f000-0x0000000000090000) (0MB) [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000090000-0x000000000009e000) (0MB) [ 0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB) [ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB) [ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x000000000257f000) (21MB) [ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x000000000257f000-0x0000000020000000) (474MB) [ 0.000000] efi: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020100000) (1MB) [ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000020100000-0x0000000071dc0000) (1308MB) [ 0.000000] efi: mem11: type=4, attr=0xf, range=[0x0000000071dc0000-0x0000000071de0000) (0MB) [ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000071de0000-0x0000000072bca000) (13MB) [ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000072bca000-0x0000000072bcc000) (0MB) [ 0.000000] efi: mem14: type=1, attr=0xf, range=[0x0000000072bcc000-0x0000000073b46000) (15MB) [ 0.000000] efi: mem15: type=7, attr=0xf, range=[0x0000000073b46000-0x0000000076a92000) (47MB) [ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x0000000076a92000-0x00000000774ec000) (10MB) [ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000774ec000-0x00000000774f9000) (0MB) [ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000774f9000-0x0000000077d46000) (8MB) [ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x0000000077d46000-0x0000000078161000) (4MB) [ 0.000000] efi: mem20: type=3, attr=0xf, range=[0x0000000078161000-0x0000000078346000) (1MB) [ 0.000000] efi: mem21: type=5, attr=0x800000000000000f, range=[0x0000000078346000-0x0000000078546000) (2MB) [ 0.000000] efi: mem22: type=6, attr=0x800000000000000f, range=[0x0000000078546000-0x0000000078846000) (3MB) [ 0.000000] efi: mem23: type=0, attr=0xf, range=[0x0000000078846000-0x0000000078c46000) (4MB) [ 0.000000] efi: mem24: type=10, attr=0xf, range=[0x0000000078c46000-0x0000000078d46000) (1MB) [ 0.000000] efi: mem25: type=9, attr=0xf, range=[0x0000000078d46000-0x0000000078d86000) (0MB) [ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x0000000078d86000-0x00000000794c8000) (7MB) [ 0.000000] efi: mem27: type=10, attr=0xf, range=[0x00000000794c8000-0x0000000079dc8000) (9MB) [ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x0000000079dc8000-0x000000007a000000) (2MB) [ 0.000000] efi: mem29: type=11, attr=0x8000000000000001, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB) [ 0.000000] efi: mem30: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB) [ 0.000000] efi: mem31: type=11, attr=0x8000000000000000, range=[0x00000000ffd00000-0x0000000100000000) (3MB) [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Aava Mobile Oy Inari 8 2GB/Type2 - Board Product Name, BIOS BYT.5.03.47.0033-022 01/16/2014 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFD00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask FC0000000 write-back [ 0.000000] 2 base 040000000 mask FE0000000 write-back [ 0.000000] 3 base 060000000 mask FF0000000 write-back [ 0.000000] 4 base 070000000 mask FF8000000 write-back [ 0.000000] 5 base 078000000 mask FFC000000 write-back [ 0.000000] 6 base 07B000000 mask FFF000000 uncachable [ 0.000000] 7 base 07AE00000 mask FFFE00000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x027fffff] [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff] [ 0.000000] [mem 0x37000000-0x373fffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff] [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k [ 0.000000] [mem 0x00400000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20100000-0x2fffffff] [ 0.000000] [mem 0x20100000-0x203fffff] page 4k [ 0.000000] [mem 0x20400000-0x2fffffff] page 2M [ 0.000000] BRK [0x02464000, 0x02464fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff] [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k [ 0.000000] BRK [0x02465000, 0x02465fff] PGTABLE [ 0.000000] ACPI: RSDP 0x78D85014 000024 (v02 INSYDE) [ 0.000000] ACPI: XSDT 0x78D61188 0000D4 (v01 INSYDE INSYDE 00000003 01000013) [ 0.000000] ACPI: FACP 0x78D7F000 00010C (v05 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: DSDT 0x78D6E000 00BAEC (v02 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: UEFI 0x78D84000 000236 (v01 INSYDE INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: TCPA 0x78D83000 000032 (v02 INSYDE INSYDE 00000000 ACPI 00040000) [ 0.000000] ACPI: UEFI 0x78D81000 000042 (v01 INSYDE INSYDE 00000000 ACPI 00040000) [ 0.000000] ACPI: DBG2 0x78D80000 000072 (v00 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: HPET 0x78D7E000 000038 (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: LPIT 0x78D7D000 000104 (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: APIC 0x78D7C000 00006C (v03 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: MCFG 0x78D7B000 00003C (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: SLIC 0x78D7A000 000176 (v01 INSYDE INSYDE 00000003 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x78D6D000 0005FB (v01 INSYDE CpuDptf 00000003 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x78D6B000 0018C2 (v01 INSYDE DptfTab 00000003 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x78D6A000 000058 (v01 INSYDE LowPwrM 00000003 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x78D69000 0000FF (v01 INSYDE SoCDptf 00000003 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x78D68000 00043A (v01 INSYDE Tpm2Tabl 00001000 ACPI 00040000) [ 0.000000] ACPI: TPM2 0x78D67000 000034 (v03 INSYDE INSYDE 00000000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x78D66000 000763 (v01 INSYDE CpuPm 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x78D65000 000290 (v01 INSYDE Cpu0Tst 00003000 ACPI 00040000) [ 0.000000] ACPI: SSDT 0x78D64000 00017A (v01 INSYDE ApTst 00003000 ACPI 00040000) [ 0.000000] ACPI: FPDT 0x78D63000 000044 (v01 INSYDE INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: CSRT 0x78D62000 00014C (v00 INSYDE INSYDE 00000005 ACPI 00040000) [ 0.000000] ACPI: BGRT 0x78D60000 000038 (v01 INSYDE INSYDE 00000001 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1064MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x02466000, 0x02466fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] Normal [mem 0x01000000-0x377fdfff] [ 0.000000] HighMem [mem 0x377fe000-0x79ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0008efff] [ 0.000000] node 0: [mem 0x00090000-0x0009dfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20100000-0x78345fff] [ 0.000000] node 0: [mem 0x78d86000-0x794c7fff] [ 0.000000] node 0: [mem 0x79dc8000-0x79ffffff] [ 0.000000] On node 0 totalpages: 494428 [ 0.000000] free_area_init_node: node 0, pgdat c17401c0, node_mem_map f68be020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 222974 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2129 pages used for memmap [ 0.000000] HighMem zone: 267458 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 0.000000] Reserving Intel graphics stolen memory at 0x7af00000-0x7eefffff [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 103 [ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff] [ 0.000000] e820: [mem 0x7ef00000-0xe00f7fff] available for PCI devices [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6882000 s27264 r0 d21888 u49152 [ 0.000000] pcpu-alloc: s27264 r0 d21888 u49152 alloc=12*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 492652 [ 0.000000] Kernel command line: root=/dev/sda2 video=HDMI-A-1:1200x1920e drm_kms_helper.edid_firmware=HDMI-A-1:edid/1200x1920.bin [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007a000) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 1909220K/1977712K available (5505K kernel code, 331K rwdata, 1640K rodata, 12092K init, 1236K bss, 68492K reserved, 1038956K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff66000 - 0xfffff000 ( 612 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1750000 - 0xc231f000 (12092 kB) [ 0.000000] .data : 0xc1560b12 - 0xc174efc0 (1977 kB) [ 0.000000] .text : 0xc1000000 - 0xc1560b12 (5506 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:1024 16 [ 0.000000] CPU 0 irqstacks, hard=f600c000 soft=f600e000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Maximum core-clock to bus-clock ratio: 0xa [ 0.000000] Resolved frequency ID: 2, frequency: 133200 KHz [ 0.000000] TSC runs at 1332000 KHz [ 0.000000] lapic_timer_frequency = 133200 [ 0.000000] tsc: Detected 1332.000 MHz processor [ 0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 2664.00 BogoMIPS (lpj=1332000) [ 0.000054] pid_max: default: 32768 minimum: 301 [ 0.000071] ACPI: Core revision 20140214 [ 0.044032] ACPI: All ACPI Tables successfully acquired [ 0.046878] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.046898] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.047248] Initializing cgroup subsys freezer [ 0.047290] CPU: Physical Processor ID: 0 [ 0.047300] CPU: Processor Core ID: 0 [ 0.047311] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.047311] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.059441] mce: CPU supports 6 MCE banks [ 0.059460] CPU0: Thermal monitoring enabled (TM1) [ 0.059480] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.059480] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.059480] tlb_flushall_shift: 6 [ 0.059673] Freeing SMP alternatives memory: 20K (c231f000 - c2324000) [ 0.059708] ------------[ cut here ]------------ [ 0.059727] WARNING: CPU: 0 PID: 0 at /tmp/e2/build/linux-git/mm/early_ioremap.c:136 __early_ioremap+0xee/0x1a6() [ 0.059739] Modules linked in: [ 0.059752] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.15.0-rc5-Inari #1 [ 0.059762] Hardware name: Aava Mobile Oy Inari 8 2GB/Type2 - Board Product Name, BIOS BYT.5.03.47.0033-022 01/16/2014 [ 0.059775] 00000000 00000000 c16fdf0c c155483e 00000000 c16fdf3c c103d194 c164be20 [ 0.059797] 00000000 00000000 c16539b8 00000088 c176cc03 c176cc03 00000042 77526000 [ 0.059819] 00000000 c16fdf4c c103d22d 00000009 00000000 c16fdfa0 c176cc03 c1740ec0 [ 0.059840] Call Trace: [ 0.059854] [] dump_stack+0x41/0x52 [ 0.059867] [] warn_slowpath_common+0x74/0x90 [ 0.059880] [] ? __early_ioremap+0xee/0x1a6 [ 0.059892] [] ? __early_ioremap+0xee/0x1a6 [ 0.059903] [] warn_slowpath_null+0x1d/0x20 [ 0.059915] [] __early_ioremap+0xee/0x1a6 [ 0.059928] [] ? __native_set_fixmap+0x1f/0x30 [ 0.059941] [] early_memremap+0xd/0xf [ 0.059953] [] efi_bgrt_init+0xe6/0x129 [ 0.059965] [] efi_late_init+0x8/0xa [ 0.059978] [] start_kernel+0x34f/0x35f [ 0.059990] [] ? repair_env_string+0x51/0x51 [ 0.060003] [] i386_start_kernel+0x137/0x13a [ 0.060040] ---[ end trace 27ffb688a5381019 ]--- [ 0.062989] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.064018] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.074045] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.074054] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.074063] ..... (found apic 0 pin 2) ... [ 0.084079] ....... works. [ 0.084087] smpboot: CPU0: Intel(R) Atom(TM) CPU Z3745 @ 1.33GHz (fam: 06, model: 37, stepping: 08) [ 0.084126] TSC deadline timer enabled [ 0.084141] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver. [ 0.084168] ... version: 3 [ 0.084176] ... bit width: 40 [ 0.084183] ... generic registers: 2 [ 0.084191] ... value mask: 000000ffffffffff [ 0.084199] ... max period: 000000ffffffffff [ 0.084207] ... fixed-purpose events: 3 [ 0.084214] ... event mask: 0000000700000003 [ 0.085792] CPU 1 irqstacks, hard=f60a6000 soft=f60b0000 [ 0.085798] x86: Booting SMP configuration: [ 0.085809] .... node #0, CPUs: #1 [ 0.095924] Initializing CPU#1 [ 0.111134] CPU 2 irqstacks, hard=f60ba000 soft=f60bc000 [ 0.111153] #2 [ 0.121206] Initializing CPU#2 [ 0.136519] CPU 3 irqstacks, hard=f60c6000 soft=f60c8000 [ 0.136533] #3 [ 0.146587] Initializing CPU#3 [ 0.161772] x86: Booted up 1 node, 4 CPUs [ 0.161791] smpboot: Total of 4 processors activated (10656.00 BogoMIPS) [ 0.162741] devtmpfs: initialized [ 0.163227] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes) [ 0.163242] PM: Registering ACPI NVS region [mem 0x78c46000-0x78d45fff] (1048576 bytes) [ 0.163294] PM: Registering ACPI NVS region [mem 0x794c8000-0x79dc7fff] (9437184 bytes) [ 0.163841] pinctrl core: initialized pinctrl subsystem [ 0.163902] RTC time: 0:40:53, date: 05/16/14 [ 0.163989] NET: Registered protocol family 16 [ 0.164313] cpuidle: using governor ladder [ 0.164324] cpuidle: using governor menu [ 0.164398] ACPI: bus type PCI registered [ 0.164551] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.164568] PCI: not using MMCONFIG [ 0.164920] PCI: Using configuration type 1 for base access [ 0.170069] ACPI: Added _OSI(Module Device) [ 0.170084] ACPI: Added _OSI(Processor Device) [ 0.170094] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.170103] ACPI: Added _OSI(Processor Aggregator Device) [ 0.204674] ACPI: SSDT 0x78BCAA90 000353 (v01 PmRef Cpu0Ist 00003000 INTL 20130117) [ 0.206249] ACPI: Dynamic OEM Table Load: [ 0.206264] ACPI: SSDT 0x00000000 000353 (v01 PmRef Cpu0Ist 00003000 INTL 20130117) [ 0.206799] ACPI: SSDT 0x78BC9910 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.208647] ACPI: Dynamic OEM Table Load: [ 0.208661] ACPI: SSDT 0x00000000 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117) [ 0.215236] ACPI: SSDT 0x78BCBD90 00015F (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.216837] ACPI: Dynamic OEM Table Load: [ 0.216851] ACPI: SSDT 0x00000000 00015F (v01 PmRef ApIst 00003000 INTL 20130117) [ 0.219400] ACPI: SSDT 0x78BCBF10 00008D (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.220819] ACPI: Dynamic OEM Table Load: [ 0.220832] ACPI: SSDT 0x00000000 00008D (v01 PmRef ApCst 00003000 INTL 20130117) [ 0.226624] ACPI: Interpreter enabled [ 0.226659] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140214/hwxface-580) [ 0.226683] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140214/hwxface-580) [ 0.226705] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140214/hwxface-580) [ 0.226726] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140214/hwxface-580) [ 0.226746] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S5_] (20140214/hwxface-580) [ 0.226764] ACPI: (supports S0) [ 0.226773] ACPI: Using IOAPIC for interrupt routing [ 0.226862] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.234470] [Firmware Info]: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] not reserved in ACPI motherboard resources [ 0.234487] PCI: not using MMCONFIG [ 0.234540] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.237741] ACPI: Power Resource [USBC] (on) [ 0.241990] ACPI: Power Resource [WWPR] (off) [ 0.252641] ACPI: Power Resource [PLPE] (on) [ 0.264429] ACPI: Power Resource [CLK0] (on) [ 0.264566] ACPI: Power Resource [CLK1] (on) [ 0.264924] ACPI: Power Resource [P28X] (off) [ 0.265067] ACPI: Power Resource [P18X] (off) [ 0.267582] ACPI: Power Resource [TCPR] (off) [ 0.274577] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.274601] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.274806] \_SB_.PCI0:_OSC invalid UUID [ 0.274811] _OSC request data:1 1e 0 [ 0.274824] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.276129] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.276204] PCI host bridge to bus 0000:00 [ 0.276218] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.276231] pci_bus 0000:00: root bus resource [io 0x0000-0x006f] [ 0.276242] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7] [ 0.276254] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.276266] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.276277] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff] [ 0.276289] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff] [ 0.276301] pci_bus 0000:00: root bus resource [mem 0x90c00000-0x90ffffff] [ 0.276313] pci_bus 0000:00: root bus resource [mem 0x7af00001-0x7ef00000] [ 0.276325] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe] [ 0.276337] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed40fff] [ 0.276361] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.276562] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.276588] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff] [ 0.276607] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref] [ 0.276625] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x1007] [ 0.276833] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.276864] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit] [ 0.276943] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.277123] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.277154] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff] [ 0.277171] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff] [ 0.277272] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.277437] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.277671] pci_bus 0000:00: on NUMA node 0 [ 0.278783] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.279101] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.279417] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.279746] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.280062] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.280378] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.280706] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.281031] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.293311] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels [ 0.294019] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels [ 0.294793] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.294809] vgaarb: loaded [ 0.294817] vgaarb: bridge control possible 0000:00:02.0 [ 0.295019] SCSI subsystem initialized [ 0.295037] ACPI: bus type USB registered [ 0.295110] usbcore: registered new interface driver usbfs [ 0.295156] usbcore: registered new interface driver hub [ 0.295258] usbcore: registered new device driver usb [ 0.302206] pps_core: LinuxPPS API ver. 1 registered [ 0.302219] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.302246] PTP clock support registered [ 0.302485] Advanced Linux Sound Architecture Driver Initialized. [ 0.302497] PCI: Using ACPI for IRQ routing [ 0.302507] PCI: pci_cache_line_size set to 64 bytes [ 0.302532] Expanded resource reserved due to conflict with PCI Bus 0000:00 [ 0.302544] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff] [ 0.302549] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff] [ 0.302554] e820: reserve RAM buffer [mem 0x78346000-0x7bffffff] [ 0.302559] e820: reserve RAM buffer [mem 0x794c8000-0x7bffffff] [ 0.302564] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] [ 0.303000] cfg80211: Calling CRDA to update world regulatory domain [ 0.303235] Switched to clocksource refined-jiffies [ 0.303367] pnp: PnP ACPI init [ 0.303389] ACPI: bus type PNP registered [ 0.303499] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.303670] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.303776] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.303895] system 00:03: [io 0x0680-0x069f] has been reserved [ 0.303911] system 00:03: [io 0x0400-0x047f] has been reserved [ 0.303923] system 00:03: [io 0x0500-0x05fe] has been reserved [ 0.303935] system 00:03: [io 0x0600-0x061f] has been reserved [ 0.303947] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.303961] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.304307] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.305812] pnp 00:05: Plug and Play ACPI device, IDs INT0002 (active) [ 0.305988] pnp 00:06: Plug and Play ACPI device, IDs INT33fc (active) [ 0.306155] pnp 00:07: Plug and Play ACPI device, IDs INT33fc (active) [ 0.306328] pnp 00:08: Plug and Play ACPI device, IDs INT33fc (active) [ 0.307495] pnp 00:09: unknown resource type 19 in _CRS [ 0.307509] pnp 00:09: can't evaluate _CRS: 1 [ 0.307579] pnp 00:09: Plug and Play ACPI device, IDs BCM2e3a (active) [ 0.314223] pnp 00:0a: unknown resource type 17 in _CRS [ 0.314237] pnp 00:0a: can't evaluate _CRS: 1 [ 0.314321] pnp 00:0a: Plug and Play ACPI device, IDs INTcfd9 PNP0c40 (active) [ 0.314481] pnp 00:0b: Plug and Play ACPI device, IDs INT33bd (active) [ 0.314809] pnp 00:0c: Plug and Play ACPI device, IDs INT3401 (active) [ 0.315136] pnp 00:0d: unknown resource type 17 in _CRS [ 0.315150] pnp 00:0d: can't evaluate _CRS: 1 [ 0.315224] pnp 00:0d: Plug and Play ACPI device, IDs INT3403 (active) [ 0.315362] pnp 00:0e: unknown resource type 17 in _CRS [ 0.315375] pnp 00:0e: can't evaluate _CRS: 1 [ 0.315448] pnp 00:0e: Plug and Play ACPI device, IDs INT3403 (active) [ 0.315643] pnp 00:0f: unknown resource type 17 in _CRS [ 0.315656] pnp 00:0f: can't evaluate _CRS: 1 [ 0.315730] pnp 00:0f: Plug and Play ACPI device, IDs INT3409 (active) [ 0.316029] pnp: PnP ACPI: found 16 devices [ 0.316040] ACPI: bus type PNP unregistered [ 0.321422] pci_bus 0000:00: resource 4 [io 0x0000-0x006f] [ 0.321433] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7] [ 0.321440] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff] [ 0.321446] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff] [ 0.321453] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff] [ 0.321459] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff] [ 0.321466] pci_bus 0000:00: resource 10 [mem 0x90c00000-0x90ffffff] [ 0.321472] pci_bus 0000:00: resource 11 [mem 0x7af00001-0x7ef00000] [ 0.321479] pci_bus 0000:00: resource 12 [mem 0x80000000-0x908ffffe] [ 0.321485] pci_bus 0000:00: resource 13 [mem 0xfed40000-0xfed40fff] [ 0.321549] NET: Registered protocol family 2 [ 0.321890] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.321938] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.322013] TCP: Hash tables configured (established 8192 bind 8192) [ 0.322056] TCP: reno registered [ 0.322068] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.322090] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.322183] NET: Registered protocol family 1 [ 0.322218] pci 0000:00:02.0: Boot video device [ 0.322632] PCI: CLS 0 bytes, default 64 [ 0.800023] microcode: CPU0 sig=0x30678, pf=0x2, revision=0x808 [ 0.800048] microcode: CPU1 sig=0x30678, pf=0x2, revision=0x808 [ 0.800075] microcode: CPU2 sig=0x30678, pf=0x2, revision=0x808 [ 0.800104] microcode: CPU3 sig=0x30678, pf=0x2, revision=0x808 [ 0.800208] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 0.800940] Scanning for low memory corruption every 60 seconds [ 0.801569] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.801616] audit: initializing netlink subsys (disabled) [ 0.801648] audit: type=2000 audit(1400200853.766:1): initialized [ 0.837558] bounce pool size: 64 pages [ 0.837578] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.843189] msgmni has been set to 1760 [ 0.843903] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.843919] io scheduler noop registered [ 0.843928] io scheduler deadline registered [ 0.844106] io scheduler cfq registered (default) [ 0.844447] intel_idle: MWAIT substates: 0x33000020 [ 0.844452] intel_idle: v0.4 model 0x37 [ 0.844457] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.852001] ACPI: AC Adapter [ADP1] (on-line) [ 0.852326] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.852347] ACPI: Power Button [PWRF] [ 0.852359] ACPI Warning: Could not enable fixed event - PowerButton (2) (20140214/evxface-628) [ 0.858350] button: probe of LNXPWRBN:00 failed with error -22 [ 0.864025] [Firmware Bug]: No valid trip found [ 0.864273] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.884668] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.885698] 80860F0A:00: ttyS1 at MMIO 0x9091d000 (irq = 39, base_baud = 2764800) is a 16550A [ 0.885954] 80860F0A:01: ttyS2 at MMIO 0x9091f000 (irq = 40, base_baud = 2764800) is a 16550A [ 0.886308] hpet: number irqs doesn't agree with number of timers [ 0.886438] Non-volatile memory driver v1.3 [ 0.886514] [drm] Initialized drm 1.1.0 20060810 [ 0.888432] [drm] Memory usable by graphics device = 2048M [ 0.893120] ACPI: \_SB_.PCI0.GFX0: Error attaching device data 7 [ 0.893372] ACPI: \_SB_.PCI0.GFX0: Error attaching device data 7 [ 0.893636] ACPI: \_SB_.PCI0.GFX0: Error attaching device data 7 [ 0.893887] ACPI: \_SB_.PCI0.GFX0: Error attaching device data 7 [ 0.894138] ACPI: \_SB_.PCI0.GFX0: Error attaching device data 7 [ 0.896821] i915 0000:00:02.0: irq 103 for MSI/MSI-X [ 0.896839] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 0.896849] [drm] Driver supports precise vblank timestamp query. [ 0.949327] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 0.950125] ACPI: \_SB_.PCI0.GFX0: Error attaching device data 7 [ 0.950523] ACPI: \_SB_.PCI0.GFX0: Error attaching device data 7 [ 1.478205] [drm] forcing HDMI-A-1 connector ON [ 1.554441] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2 [ 1.575805] [drm] Got external EDID base block and 0 extensions from "edid/1200x1920.bin" for connector "HDMI-A-1" [ 1.722033] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4 [ 1.818338] fbcon: inteldrmfb (fb0) is primary device [ 1.955080] Switched to clocksource tsc [ 2.331727] Console: switching to colour frame buffer device 150x120 [ 2.365253] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 2.365400] i915 0000:00:02.0: registered panic notifier [ 2.369617] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.371353] acpi device:1a: registered as cooling_device4 [ 2.372792] acpi device:21: registered as cooling_device5 [ 2.373108] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1 [ 2.373395] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.373911] brd: module loaded [ 2.374464] loop: module loaded [ 2.375205] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.375451] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 2.375778] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.375815] xhci_hcd 0000:00:14.0: irq 104 for MSI/MSI-X [ 2.375961] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.376124] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.376295] usb usb1: Product: xHCI Host Controller [ 2.376412] usb usb1: Manufacturer: Linux 3.15.0-rc5-Inari xhci_hcd [ 2.376568] usb usb1: SerialNumber: 0000:00:14.0 [ 2.376973] hub 1-0:1.0: USB hub found [ 2.377087] hub 1-0:1.0: 6 ports detected [ 2.378757] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.378979] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 2.379241] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.379405] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.379583] usb usb2: Product: xHCI Host Controller [ 2.379702] usb usb2: Manufacturer: Linux 3.15.0-rc5-Inari xhci_hcd [ 2.379850] usb usb2: SerialNumber: 0000:00:14.0 [ 2.380239] hub 2-0:1.0: USB hub found [ 2.380351] hub 2-0:1.0: 1 port detected [ 2.380860] usbcore: registered new interface driver usb-storage [ 2.381142] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.425347] i8042: No controller found [ 3.425565] mousedev: PS/2 mouse device common for all mice [ 3.425675] [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off [ 3.426041] ACPI Warning: Could not enable fixed event - RealTimeClock (4) (20140214/evxface-628) [ 3.426464] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 3.426649] rtc_cmos 00:00: alarms up to one day, 242 bytes nvram [ 3.426883] i2c /dev entries driver [ 3.428313] Intel P-state driver initializing. [ 3.428446] Intel pstate controlling: cpu 0 [ 3.428587] Intel pstate controlling: cpu 1 [ 3.428725] Intel pstate controlling: cpu 2 [ 3.428886] Intel pstate controlling: cpu 3 [ 3.429124] sdhci: Secure Digital Host Controller Interface driver [ 3.429272] sdhci: Copyright(c) Pierre Ossman [ 3.430578] mmc0: no vqmmc regulator found [ 3.430681] mmc0: no vmmc regulator found [ 3.431936] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA [ 3.433476] mmc1: no vqmmc regulator found [ 3.433579] mmc1: no vmmc regulator found [ 3.434830] mmc1: SDHCI controller on ACPI [INT33BB:00] using ADMA [ 3.435453] sdhci-acpi 80860F14:01: failed to setup card detect gpio [ 3.436623] mmc2: no vqmmc regulator found [ 3.436724] mmc2: no vmmc regulator found [ 3.437966] mmc2: SDHCI controller on ACPI [80860F14:01] using ADMA [ 3.438148] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.438273] EFI Variables Facility v0.08 2004-May-17 [ 3.448100] hidraw: raw HID events driver (C) Jiri Kosina [ 3.448546] usbcore: registered new interface driver usbhid [ 3.448660] usbhid: USB HID core driver [ 3.449146] TCP: cubic registered [ 3.449218] Initializing XFRM netlink socket [ 3.449576] NET: Registered protocol family 10 [ 3.450087] sit: IPv6 over IPv4 tunneling driver [ 3.450438] NET: Registered protocol family 17 [ 3.450890] Using IPI No-Shortcut mode [ 3.451197] registered taskstats version 1 [ 3.451596] Magic number: 14:324:658 [ 3.451761] console [netcon0] enabled [ 3.451837] netconsole: network logging started [ 3.452124] PM: Hibernation image not present or could not be loaded. [ 3.452133] ALSA device list: [ 3.452195] No soundcards found. [ 3.452325] Warning: unable to open an initial console. [ 3.458742] Freeing unused kernel memory: 12092K (c1750000 - c231f000) [ 3.472576] udevd[949]: starting version 173 [ 3.545752] mmc0: BKOPS_EN bit is not set [ 3.622230] mmc0: new HS200 MMC card at address 0001 [ 3.624057] mmcblk0: mmc0:0001 HCG8e 58.2 GiB [ 3.624598] mmcblk0boot0: mmc0:0001 HCG8e partition 1 4.00 MiB [ 3.624750] mmcblk0boot1: mmc0:0001 HCG8e partition 2 4.00 MiB [ 3.625057] mmcblk0rpmb: mmc0:0001 HCG8e partition 3 4.00 MiB [ 3.625994] mmcblk0: p1 p2 [ 3.630611] mmcblk0boot1: unknown partition table [ 3.633735] mmcblk0boot0: [ 3.640096] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd [ 3.651068] usb 2-1: New USB device found, idVendor=0451, idProduct=8046 [ 3.651186] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.651671] hub 2-1:1.0: USB hub found [ 3.651758] hub 2-1:1.0: 4 ports detected [ 3.779948] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 3.943266] usb 1-1: New USB device found, idVendor=0451, idProduct=8044 [ 3.969159] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 3.994984] usb 1-1: SerialNumber: 420208698DA1 [ 4.021771] hub 1-1:1.0: USB hub found [ 4.047612] hub 1-1:1.0: 4 ports detected [ 4.094961] Clocksource tsc unstable (delta = 139070527 ns) [ 4.120773] Switched to clocksource refined-jiffies [ 4.143425] usb 1-3: new high-speed USB device number 3 using xhci_hcd [ 4.235688] usb 1-3: New USB device found, idVendor=12d1, idProduct=1570 [ 4.262187] usb 1-3: New USB device strings: Mfr=5, Product=4, SerialNumber=0 [ 4.288823] usb 1-3: Product: HUAWEI Mobile Broadband Module [ 4.315372] usb 1-3: Manufacturer: Huawei Technologies Co., Ltd. [ 4.454809] usb 1-4: new high-speed USB device number 4 using xhci_hcd [ 4.615088] usb 1-4: New USB device found, idVendor=0951, idProduct=1603 [ 4.641469] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.667779] usb 1-4: Product: DataTraveler 2.0 [ 4.694205] usb 1-4: Manufacturer: Kingston [ 4.720492] usb 1-4: SerialNumber: 89900000000000000000017E [ 4.747830] usb-storage 1-4:1.0: USB Mass Storage device detected [ 4.774449] scsi0 : usb-storage 1-4:1.0 [ 4.833239] usb 1-1.1: new low-speed USB device number 5 using xhci_hcd [ 4.904523] usb 1-1.1: New USB device found, idVendor=046d, idProduct=c03e [ 4.930590] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.956550] usb 1-1.1: Product: USB-PS/2 Optical Mouse [ 4.982418] usb 1-1.1: Manufacturer: Logitech [ 5.008663] usb 1-1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 5.039453] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:046D:C03E.0001/input/input2 [ 5.067114] hid-generic 0003:046D:C03E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:14.0-1.1/input0 [ 5.132430] usb 1-1.2: new high-speed USB device number 6 using xhci_hcd [ 5.203734] usb 1-1.2: New USB device found, idVendor=0424, idProduct=7500 [ 5.230739] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.257917] usb 1-1.2: Product: LAN7500 [ 5.284761] usb 1-1.2: Manufacturer: SMSC [ 5.311315] usb 1-1.2: SerialNumber: 00800f11700e [ 5.381679] usb 1-1.3: new low-speed USB device number 7 using xhci_hcd [ 5.462341] usb 1-1.3: New USB device found, idVendor=046d, idProduct=c312 [ 5.489081] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.515839] usb 1-1.3: Product: USB Multimedia Keyboard [ 5.542443] usb 1-1.3: Manufacturer: LITEON Technology [ 5.569572] usb 1-1.3: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes [ 5.600996] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:046D:C312.0002/input/input3 [ 5.656590] hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:14.0-1.3/input0 [ 5.768892] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2 [ 5.799079] sd 0:0:0:0: [sda] 7856128 512-byte logical blocks: (4.02 GB/3.74 GiB) [ 5.799096] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 5.857532] sd 0:0:0:0: [sda] Write Protect is off [ 5.886444] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00 [ 5.886816] sd 0:0:0:0: [sda] No Caching mode page found [ 5.915622] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 5.947408] sda: sda1 sda2 [ 5.986433] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 6.043333] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities [ 6.076814] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities [ 6.119661] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 6.280069] random: nonblocking pool is initialized [ 7.357011] udevd[1689]: starting version 173 [ 7.477008] sst-acpi 80860F28:00: Direct firmware load failed with error -2 [ 7.484948] sst-acpi 80860F28:00: Falling back to user helper [ 7.577743] sst-acpi 80860F28:00: Cannot load firmware intel/fw_sst_0f28.bin-i2s_master [ 7.586076] byt-rt5640 byt-rt5640: ASoC: CPU DAI Front-cpu-dai not registered [ 7.592798] smsc75xx v1.0.0 [ 7.601973] platform byt-rt5640: Driver byt-rt5640 requests probe deferral [ 7.629938] smsc75xx 1-1.2:1.0 eth0: register 'smsc75xx' at usb-0000:00:14.0-1.2, smsc75xx USB 2.0 Gigabit Ethernet, 70:2f:97:00:22:4f [ 7.660544] usbcore: registered new interface driver smsc75xx [ 7.660554] byt-rt5640 byt-rt5640: ASoC: CPU DAI Front-cpu-dai not registered [ 7.660598] platform byt-rt5640: Driver byt-rt5640 requests probe deferral [ 15.786357] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress. [ 15.819492] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00 [ 15.850882] mmcblk0rpmb: retrying using single block read [ 15.884298] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 15.917928] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 15.951471] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 15.984802] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 16.017890] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 16.050737] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 16.081372] end_request: I/O error, dev mmcblk0rpmb, sector 8064 [ 16.112006] Buffer I/O error on device mmcblk0rpmb, logical block 1008 [ 24.373945] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress. [ 24.407032] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00 [ 24.438318] mmcblk0rpmb: retrying using single block read [ 24.471644] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 24.505126] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 24.538515] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 24.571758] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 24.604838] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 24.637751] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 24.668398] end_request: I/O error, dev mmcblk0rpmb, sector 8064 [ 24.699120] Buffer I/O error on device mmcblk0rpmb, logical block 1008 [ 32.940422] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress. [ 32.973781] mmcblk0rpmb: error -110 transferring data, sector 0, nr 16, cmd response 0x900, card status 0xb00 [ 33.005431] mmcblk0rpmb: retrying using single block read [ 33.039167] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 33.073116] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 33.106965] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 33.140652] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 33.174081] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 33.207244] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 33.238143] end_request: I/O error, dev mmcblk0rpmb, sector 0 [ 33.269079] Buffer I/O error on device mmcblk0rpmb, logical block 0 [ 33.300138] end_request: I/O error, dev mmcblk0rpmb, sector 8 [ 33.331221] Buffer I/O error on device mmcblk0rpmb, logical block 1 [ 41.566672] mmc0: Got data interrupt 0x00000002 even though no data operation was in progress. [ 41.600468] mmcblk0rpmb: error -110 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 41.632451] mmcblk0rpmb: retrying using single block read [ 41.666526] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 41.700864] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 41.734945] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 41.768811] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 41.802498] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 41.835947] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 [ 41.867201] end_request: I/O error, dev mmcblk0rpmb, sector 0 [ 41.898423] Buffer I/O error on device mmcblk0rpmb, logical block 0 [ 45.972615] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 47.603164] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 47.634111] smsc75xx 1-1.2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 47.668901] smsc75xx 1-1.2:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1