| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 16 May 2014 18:37:28 +0200
From: Andreas Werner <andreas.werner@....de>
To: <linux-kernel@...r.kernel.org>
CC: <sameo@...ux.intel.com>, <lee.jones@...aro.org>, <wim@...ana.be>,
<linux-watchdog@...r.kernel.org>, <cooloney@...il.com>,
<rpurdie@...ys.net>, <linux-leds@...r.kernel.org>,
<johannes.thumshirn@....de>, <thomas.schnuerer@....de>,
<wernerandy@....de>
Subject: [PATCH 2/3] drivers/watchdog/menf21bmc_wd: introduce MEN 14F021P00
BMC Watchdog driver
Added driver to support the 14F021P00 BMC Watchdog.
The BMC is a Board Management Controller including watchdog functionality.
This driver use the I2C interface to the BMC using the menf21bmc MFD Core driver.
Signed-off-by: Andreas Werner <andreas.werner@....de>
---
drivers/watchdog/Kconfig | 7 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/menf21bmc_wd.c | 263 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 271 insertions(+)
create mode 100644 drivers/watchdog/menf21bmc_wd.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 2b4c1fc..ede3201 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -95,6 +95,13 @@ config GPIO_WATCHDOG
If you say yes here you get support for watchdog device
controlled through GPIO-line.
+config MENF21BMC_WATCHDOG
+ tristate "MEN 14F021P00 BMC Watchdog"
+ depends on MFD_MENF21BMC
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the MEN 14F021P00 BMC Watchdog.
+
config WM831X_WATCHDOG
tristate "WM831x watchdog"
depends on MFD_WM831X
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 1b5f3d5..0a5465d 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -178,3 +178,4 @@ obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
+obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wd.o
diff --git a/drivers/watchdog/menf21bmc_wd.c b/drivers/watchdog/menf21bmc_wd.c
new file mode 100644
index 0000000..31ccea8
--- /dev/null
+++ b/drivers/watchdog/menf21bmc_wd.c
@@ -0,0 +1,263 @@
+/*
+ * MEN 14F021P00 Board Management Controller (BMC) Watchdog Driver.
+ *
+ * Copyright (C) 2014 MEN Mikro Elektronik Nuernberg GmbH
+ * Author: Andreas Werner <andreas.werner@....de>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/menf21bmc.h>
+
+#define DEVNAME "menf21bmc_wd"
+
+#define BMC_CMD_WD_ON 0x11
+#define BMC_CMD_WD_OFF 0x12
+#define BMC_CMD_WD_TRIG 0x13
+#define BMC_CMD_WD_TIME 0x14
+#define BMC_CMD_WD_STATE 0x17
+#define BMC_CMD_WD_ARM_SET 0x18
+#define BMC_CMD_WD_ARM_GET 0x19
+#define BMC_CMD_ARM_STATE 0x19
+#define BMC_WD_OFF_VAL 0x69
+#define BMC_CMD_RST_RSN 0x92
+
+#define BMC_WD_TIMEOUT_MIN 1 /* in sec -> BMC min = 0.1 s */
+#define BMC_WD_TIMEOUT_MAX 6553 /* in sec -> BMC max = 6553,5 s */
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct menf21bmc_wd_data {
+ struct watchdog_device wdt;
+ struct menf21bmc *menf21bmc;
+};
+
+static int menf21bmc_wd_set_bootstatus(struct menf21bmc_wd_data *data)
+{
+ u8 rst_rsn;
+ int ret;
+ struct menf21bmc *menf21bmc = data->menf21bmc;
+
+ ret = menf21bmc->read_byte_data(menf21bmc->client,
+ BMC_CMD_RST_RSN, &rst_rsn);
+ if (ret < 0)
+ return -EIO;
+
+ if (rst_rsn == 0x02)
+ data->wdt.bootstatus |= WDIOF_CARDRESET;
+ else if (rst_rsn == 0x05)
+ data->wdt.bootstatus |= WDIOF_EXTERN1;
+ else if (rst_rsn == 0x06)
+ data->wdt.bootstatus |= WDIOF_EXTERN2;
+ else if (rst_rsn == 0x0A)
+ data->wdt.bootstatus |= WDIOF_POWERUNDER;
+
+ return 0;
+}
+
+static int menf21bmc_wd_leave_prod_mode(struct platform_device *pdev)
+{
+ int ret;
+ uint8_t val;
+ struct menf21bmc_wd_data *data = platform_get_drvdata(pdev);
+ struct menf21bmc *menf21bmc = data->menf21bmc;
+
+ ret = menf21bmc->read_byte_data(menf21bmc->client,
+ BMC_CMD_WD_ARM_GET, &val);
+ if (ret < 0)
+ return -EIO;
+
+ /*
+ * Production mode should be not active after delivery of the Board.
+ * To be sure we check it, inform the user and leave the mode
+ * if active.
+ */
+ if (val == 0x00) {
+ dev_info(&pdev->dev,
+ "BMC in production mode. Leave production mode\n");
+
+ ret = menf21bmc->write_byte(menf21bmc->client,
+ BMC_CMD_WD_ARM_SET);
+ if (ret < 0)
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int menf21bmc_wd_start(struct watchdog_device *wdt)
+{
+ struct menf21bmc_wd_data *data = watchdog_get_drvdata(wdt);
+ struct menf21bmc *menf21bmc = data->menf21bmc;
+
+ return menf21bmc->write_byte(menf21bmc->client, BMC_CMD_WD_ON);
+}
+
+static int menf21bmc_wd_stop(struct watchdog_device *wdt)
+{
+ struct menf21bmc_wd_data *data = watchdog_get_drvdata(wdt);
+ struct menf21bmc *menf21bmc = data->menf21bmc;
+
+ return menf21bmc->write_byte_data(menf21bmc->client,
+ BMC_CMD_WD_OFF, BMC_WD_OFF_VAL);
+}
+
+static int
+menf21bmc_wd_settimeout(struct watchdog_device *wdt, unsigned int timeout)
+{
+ int ret;
+ struct menf21bmc_wd_data *data = watchdog_get_drvdata(wdt);
+ struct menf21bmc *menf21bmc = data->menf21bmc;
+
+ /*
+ * BMC Watchdog does have a resolution of 100ms.
+ * Watchdog API defines the timeout in seconds, so we have to
+ * multiply the value.
+ */
+ ret = menf21bmc->write_word_data(menf21bmc->client,
+ BMC_CMD_WD_TIME, timeout * 10);
+ if (ret < 0)
+ return -EIO;
+
+ wdt->timeout = timeout;
+
+ return 0;
+}
+
+static int menf21bmc_wd_ping(struct watchdog_device *wdt)
+{
+ struct menf21bmc_wd_data *data = watchdog_get_drvdata(wdt);
+ struct menf21bmc *menf21bmc = data->menf21bmc;
+
+ return menf21bmc->write_byte(menf21bmc->client, BMC_CMD_WD_TRIG);
+}
+
+static const struct watchdog_info menf21bmc_wd_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .identity = DEVNAME,
+};
+
+static const struct watchdog_ops menf21bmc_wd_ops = {
+ .owner = THIS_MODULE,
+ .start = menf21bmc_wd_start,
+ .stop = menf21bmc_wd_stop,
+ .ping = menf21bmc_wd_ping,
+ .set_timeout = menf21bmc_wd_settimeout,
+};
+
+static int menf21bmc_wd_probe(struct platform_device *pdev)
+{
+ int ret;
+ uint16_t bmc_timeout;
+ struct menf21bmc_wd_data *driver_data;
+ struct watchdog_device *menf21bmc_wd;
+ struct menf21bmc *menf21bmc = dev_get_drvdata(pdev->dev.parent);
+
+ driver_data = devm_kzalloc(&pdev->dev,
+ sizeof(struct menf21bmc_wd_data), GFP_KERNEL);
+ if (!driver_data)
+ return -ENOMEM;
+
+ driver_data->menf21bmc = menf21bmc;
+
+ menf21bmc_wd = &driver_data->wdt;
+ menf21bmc_wd->ops = &menf21bmc_wd_ops;
+ menf21bmc_wd->info = &menf21bmc_wd_info;
+ menf21bmc_wd->min_timeout = BMC_WD_TIMEOUT_MIN;
+ menf21bmc_wd->max_timeout = BMC_WD_TIMEOUT_MAX;
+
+
+ /*
+ * Get the current wdt timeout value from the BMC because
+ * the BMC will save the value set before if the system restarts.
+ */
+ ret = menf21bmc->read_word_data(menf21bmc->client,
+ BMC_CMD_WD_TIME, &bmc_timeout);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to get current WDT timeout\n");
+ return ret;
+ }
+
+ watchdog_init_timeout(menf21bmc_wd, bmc_timeout / 10, &pdev->dev);
+
+ watchdog_set_nowayout(menf21bmc_wd, nowayout);
+ watchdog_set_drvdata(menf21bmc_wd, driver_data);
+ platform_set_drvdata(pdev, driver_data);
+
+ /*
+ * We have to leave the Production Mode of the BMC to activate the
+ * Watchdog functionality.
+ */
+ ret = menf21bmc_wd_leave_prod_mode(pdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to leave production mode\n");
+ return ret;
+ }
+
+ ret = menf21bmc_wd_set_bootstatus(driver_data);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to set Watchdog bootstatus\n");
+ return ret;
+ }
+
+ ret = watchdog_register_device(&driver_data->wdt);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register Watchdog device\n");
+ return ret;
+ }
+
+ dev_info(&pdev->dev, "MEN 14F021P00 BMC Watchdog device enabled\n");
+
+ return 0;
+}
+
+static int menf21bmc_wd_remove(struct platform_device *pdev)
+{
+ struct menf21bmc_wd_data *data = platform_get_drvdata(pdev);
+
+ dev_warn(&pdev->dev,
+ "Untregister MEN 14F021P00 BMC Watchdog device, board may reset\n");
+
+ watchdog_unregister_device(&data->wdt);
+
+ return 0;
+}
+
+static void menf21bmc_wd_shutdown(struct platform_device *pdev)
+{
+ struct menf21bmc_wd_data *data = platform_get_drvdata(pdev);
+ struct menf21bmc *menf21bmc = data->menf21bmc;
+
+ menf21bmc->write_word_data(menf21bmc->client,
+ BMC_CMD_WD_OFF, BMC_WD_OFF_VAL);
+}
+
+static struct platform_driver menf21bmc_wd = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DEVNAME,
+ },
+ .probe = menf21bmc_wd_probe,
+ .remove = menf21bmc_wd_remove,
+ .shutdown = menf21bmc_wd_shutdown,
+};
+
+module_platform_driver(menf21bmc_wd);
+
+MODULE_DESCRIPTION("MEN 14F021P00 BMC Watchdog driver");
+MODULE_AUTHOR("Andreas Werner <andreas.werner@....de>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:menf21bmc_wd");
--
1.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists