| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 19 May 2014 10:17:42 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Alexander Bersenev <bay@...kerdom.ru>
Cc: linux-sunxi@...glegroups.com, david@...deman.nu,
devicetree@...r.kernel.org, galak@...eaurora.org,
grant.likely@...aro.org, ijc+devicetree@...lion.org.uk,
james.hogan@...tec.com, linux-arm-kernel@...ts.infradead.org,
linux@....linux.org.uk, m.chehab@...sung.com, mark.rutland@....com,
pawel.moll@....com, rdunlap@...radead.org, robh+dt@...nel.org,
sean@...s.org, srinivas.kandagatla@...com,
wingrime@...ux-sunxi.org, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-media@...r.kernel.org
Subject: Re: [PATCH v7 2/3] [media] rc: add sunxi-ir driver
Hi,
I missed a few things in my first review.
On Thu, May 15, 2014 at 03:56:41AM +0600, Alexander Bersenev wrote:
> This patch adds driver for sunxi IR controller.
> It is based on Alexsey Shestacov's work based on the original driver
> supplied by Allwinner.
>
> Signed-off-by: Alexander Bersenev <bay@...kerdom.ru>
> Signed-off-by: Alexsey Shestacov <wingrime@...ux-sunxi.org>
> ---
> drivers/media/rc/Kconfig | 10 ++
> drivers/media/rc/Makefile | 1 +
> drivers/media/rc/sunxi-cir.c | 334 +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 345 insertions(+)
> create mode 100644 drivers/media/rc/sunxi-cir.c
>
> diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig
> index 8fbd377..9427fad 100644
> --- a/drivers/media/rc/Kconfig
> +++ b/drivers/media/rc/Kconfig
> @@ -343,4 +343,14 @@ config RC_ST
>
> If you're not sure, select N here.
>
> +config IR_SUNXI
> + tristate "SUNXI IR remote control"
> + depends on RC_CORE
> + depends on ARCH_SUNXI
> + ---help---
> + Say Y if you want to use sunXi internal IR Controller
> +
> + To compile this driver as a module, choose M here: the module will
> + be called sunxi-ir.
> +
> endif #RC_DEVICES
> diff --git a/drivers/media/rc/Makefile b/drivers/media/rc/Makefile
> index f8b54ff..9ee9ee7 100644
> --- a/drivers/media/rc/Makefile
> +++ b/drivers/media/rc/Makefile
> @@ -32,4 +32,5 @@ obj-$(CONFIG_IR_GPIO_CIR) += gpio-ir-recv.o
> obj-$(CONFIG_IR_IGUANA) += iguanair.o
> obj-$(CONFIG_IR_TTUSBIR) += ttusbir.o
> obj-$(CONFIG_RC_ST) += st_rc.o
> +obj-$(CONFIG_IR_SUNXI) += sunxi-cir.o
> obj-$(CONFIG_IR_IMG) += img-ir/
> diff --git a/drivers/media/rc/sunxi-cir.c b/drivers/media/rc/sunxi-cir.c
> new file mode 100644
> index 0000000..25eb175
> --- /dev/null
> +++ b/drivers/media/rc/sunxi-cir.c
> @@ -0,0 +1,334 @@
> +/*
> + * Driver for Allwinner sunXi IR controller
> + *
> + * Copyright (C) 2014 Alexsey Shestacov <wingrime@...ux-sunxi.org>
> + * Copyright (C) 2014 Alexander Bersenev <bay@...kerdom.ru>
> + *
> + * Based on sun5i-ir.c:
> + * Copyright (C) 2007-2012 Daniel Wang
> + * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <media/rc-core.h>
> +
> +#define SUNXI_IR_DEV "sunxi-ir"
> +
> +/* Registers */
> +/* IR Control */
> +#define SUNXI_IR_CTL_REG 0x00
> +/* Rx Config */
> +#define SUNXI_IR_RXCTL_REG 0x10
> +/* Rx Data */
> +#define SUNXI_IR_RXFIFO_REG 0x20
> +/* Rx Interrupt Enable */
> +#define SUNXI_IR_RXINT_REG 0x2C
> +/* Rx Interrupt Status */
> +#define SUNXI_IR_RXSTA_REG 0x30
> +/* IR Sample Config */
> +#define SUNXI_IR_CIR_REG 0x34
> +
> +/* Global Enable for IR_CTL Register */
> +#define REG_CTL_GEN BIT(0)
> +/* RX block enable for IR_CTL Register */
> +#define REG_CTL_RXEN BIT(1)
> +/* CIR mode for IR_CTL Register */
> +#define REG_CTL_MD (BIT(4)|BIT(5))
I usually prefer to have the bits definition declared just below the
defininition of the register itself, something like:
#define SUNXI_CTRL_REG 0x00
#define SUNXI_CTRL_EN BIT(0)
#define SUNXI_CTRL_RXEN BIT(1)
etc...
It's easier to read and avoids the comments to say in which register
each bit belongs.
> +/* IR_RXCTL_REG Register Receiver Pulse Polarity Invert flag */
> +#define REG_RXCTL_RPPI BIT(2)
> +
> +/* IR_RXINT_REG Register fields */
> +#define REG_RXINT_ROI_EN BIT(0) /* Rx FIFO Overflow */
> +#define REG_RXINT_RPEI_EN BIT(1) /* Rx Packet End */
> +#define REG_RXINT_RAI_EN BIT(4) /* Rx FIFO Data Available */
> +/* Rx FIFO available byte level */
> +#define REG_RXINT_RAL__MASK (BIT(8)|BIT(9)|BIT(10)|BIT(11))
> +#define REG_RXINT_RAL__SHIFT 8
> +static inline uint32_t REG_RXINT_RAL(uint16_t val)
> +{
> + return (val << REG_RXINT_RAL__SHIFT) & REG_RXINT_RAL__MASK;
> +}
This should be turned either in a macro if you want to keep the upper
case name, or have a lower case name if you want to keep it as a
function.
In both cases, you don't want your function to be declared in the
middle of your defines.
Thanks,
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)
Powered by blists - more mailing lists