| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1400495155-11136-2-git-send-email-ivan.khoronzhuk@ti.com>
Date: Mon, 19 May 2014 13:25:51 +0300
From: Ivan Khoronzhuk <ivan.khoronzhuk@...com>
To: <dbaryshkov@...il.com>, <dwmw2@...radead.org>,
<santosh.shilimkar@...com>, <robh+dt@...nel.org>,
<pawel.moll@....com>, <mark.rutland@....com>,
<ijc+devicetree@...lion.org.uk>, <galak@...eaurora.org>,
<grant.likely@...aro.org>
CC: <arnd@...db.de>, <rdunlap@...radead.org>, <linux@....linux.org.uk>,
<grygorii.strashko@...com>, <olof@...om.net>, <w-kwok2@...com>,
<sboyd@...eaurora.org>, <devicetree@...r.kernel.org>,
<linux-doc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Ivan Khoronzhuk <ivan.khoronzhuk@...com>
Subject: [Patch v3 1/5] Power: reset: keystone-reset: introduce keystone reset driver
The keystone SoC can be rebooted in several ways. By external reset
pin, by soft and by watchdogs. To allow keystone SoC reset if
watchdog is triggered we have to enable it in reset mux configuration
register regarding of watchdog configuration. Also we need to set
soft/hard reset we are going to use.
So add keystone reset driver to handle all this stuff.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@...com>
---
drivers/power/reset/Kconfig | 7 ++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/keystone-reset.c | 171 +++++++++++++++++++++++++++++++++++
3 files changed, 179 insertions(+)
create mode 100644 drivers/power/reset/keystone-reset.c
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index fa0e4e0..4d2d3d8 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -57,3 +57,10 @@ config POWER_RESET_XGENE
depends on POWER_RESET
help
Reboot support for the APM SoC X-Gene Eval boards.
+
+config POWER_RESET_KEYSTONE
+ bool "Keystone reset driver"
+ depends on ARCH_KEYSTONE
+ help
+ Reboot support for the KEYSTONE SoCs.
+
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
index a5b4a77..802a420 100644
--- a/drivers/power/reset/Makefile
+++ b/drivers/power/reset/Makefile
@@ -5,3 +5,4 @@ obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o
+obj-$(CONFIG_POWER_RESET_KEYSTONE) += keystone-reset.o
diff --git a/drivers/power/reset/keystone-reset.c b/drivers/power/reset/keystone-reset.c
new file mode 100644
index 0000000..3e44040
--- /dev/null
+++ b/drivers/power/reset/keystone-reset.c
@@ -0,0 +1,171 @@
+/*
+ * TI keystone reboot driver
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated. http://www.ti.com/
+ *
+ * Author: Ivan Khoronzhuk <ivan.khoronzhuk@...com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <asm/system_misc.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#define RSTYPE_RG 0x0
+#define RSCTRL_RG 0x4
+#define RSCFG_RG 0x8
+#define RSISO_RG 0xc
+
+#define RSCTRL_KEY_MASK 0xffff0000
+#define RSCTRL_KEY 0x5a69
+#define RSCTRL_RESET BIT(16)
+
+#define RSMUX_OMODE_MASK 0xe
+#define RSMUX_OMODE_RESET_SOC 0xa
+#define RSMUX_OMODE_RESET_OFF 0x0
+#define RSMUX_LOCK_MASK 0x1
+#define RSMUX_LOCK_SET 0x1
+
+#define RSCFG_RSTYPE_SOFT 0x300f
+#define RSCFG_RSTYPE_HARD 0x0
+
+#define WDT_MUX_NUMBER 0x4
+
+static void __iomem *rspll_base;
+
+/**
+ * rsctrl_enable_rspll_write - enable access to RSCTRL, RSCFG
+ * To be able to access to RSCTRL, RSCFG registers
+ * we have to write a key before
+ */
+static void rsctrl_enable_rspll_write(void)
+{
+ u32 val;
+ void __iomem *rstctrl_rg;
+
+ rstctrl_rg = rspll_base + RSCTRL_RG;
+ val = readl(rstctrl_rg);
+ val &= RSCTRL_KEY_MASK;
+ val |= RSCTRL_KEY;
+ writel(val, rstctrl_rg);
+}
+
+static void rsctrl_restart(enum reboot_mode mode, const char *cmd)
+{
+ u32 val;
+ void __iomem *rstctrl;
+
+ /* enable write access to RSTCTRL */
+ rsctrl_enable_rspll_write();
+
+ /* reset the SOC */
+ rstctrl = rspll_base + RSCTRL_RG;
+ val = readl(rstctrl);
+ val &= ~RSCTRL_RESET;
+ writel(val, rstctrl);
+}
+
+static struct of_device_id rsctrl_of_match[] = {
+ {.compatible = "ti,keystone-reset", },
+ {},
+};
+
+static int rsctrl_probe(struct platform_device *pdev)
+{
+ int i;
+ int ret;
+ u32 val;
+ void __iomem *rg;
+ struct resource *res;
+ void __iomem *rsmux_base;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+
+ if (!np)
+ return -ENODEV;
+
+ i = of_property_match_string(np, "reg-names", "pllregs");
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ rspll_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(rspll_base))
+ return PTR_ERR(rspll_base);
+
+ i = of_property_match_string(np, "reg-names", "muxregs");
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ rsmux_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(rsmux_base))
+ return PTR_ERR(rsmux_base);
+
+ /* set soft/hard reset */
+ val = of_property_read_bool(np, "ti,soft-reset");
+ val = val ? RSCFG_RSTYPE_SOFT : RSCFG_RSTYPE_HARD;
+
+ rsctrl_enable_rspll_write();
+ writel(val, rspll_base + RSCFG_RG);
+
+ arm_pm_restart = rsctrl_restart;
+
+ /* disable reset isolation for all module clocks */
+ writel(0, rspll_base + RSISO_RG);
+
+ /* enable reset for watchdogs from list */
+ for (i = 0; i < WDT_MUX_NUMBER; i++) {
+ ret = of_property_read_u32_index(np, "ti,wdt_list", i, &val);
+ if (ret == -EOVERFLOW && !i) {
+ dev_err(dev, "ti,wdt_list property has to contain at"
+ "least one entry\n");
+ return -EINVAL;
+ } else if (ret) {
+ break;
+ }
+
+ if (val >= WDT_MUX_NUMBER) {
+ dev_err(dev, "ti,wdt_list property can contain"
+ "only numbers < 4\n");
+ return -EINVAL;
+ }
+
+ rg = rsmux_base + val * 4;
+
+ val = readl(rg);
+ val &= ~RSMUX_OMODE_MASK;
+ val |= RSMUX_OMODE_RESET_SOC | RSMUX_LOCK_SET;
+ writel(val, rg);
+ }
+
+ /* disable reset for watchdogs from not list */
+ for (i = 0; i < WDT_MUX_NUMBER; i++) {
+ rg = rsmux_base + i * 4;
+
+ val = readl(rg);
+ if (!(val & RSMUX_LOCK_MASK)) {
+ val &= ~RSMUX_OMODE_MASK;
+ val |= RSMUX_OMODE_RESET_OFF | RSMUX_LOCK_SET;
+ writel(val, rg);
+ }
+ }
+
+ devm_iounmap(dev, rsmux_base);
+ return 0;
+}
+
+static struct platform_driver rsctrl_driver = {
+ .probe = rsctrl_probe,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = KBUILD_MODNAME,
+ .of_match_table = rsctrl_of_match,
+ },
+};
+module_platform_driver(rsctrl_driver);
+
+MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@...com>");
+MODULE_DESCRIPTION("Texas Instruments keystone reset driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists