[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1400496850-23860-5-git-send-email-a.hajda@samsung.com>
Date: Mon, 19 May 2014 12:54:06 +0200
From: Andrzej Hajda <a.hajda@...sung.com>
To: linux-kernel@...r.kernel.org (open list)
Cc: Andrzej Hajda <a.hajda@...sung.com>,
Marek Szyprowski <m.szyprowski@...sung.com>,
Inki Dae <inki.dae@...sung.com>,
Joonyoung Shim <jy0922.shim@...sung.com>,
Seung-Woo Kim <sw0312.kim@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
dri-devel@...ts.freedesktop.org,
linux-samsung-soc@...r.kernel.org (moderated list:ARM/S5P EXYNOS AR...)
Subject: [PATCH 4/8] drm/exynos/fimc: simplify pre-scaler ratio calculation
The patch replaces dedicated function for scaling ratio
calculation by fls calls.
Signed-off-by: Andrzej Hajda <a.hajda@...sung.com>
---
drivers/gpu/drm/exynos/exynos_drm_fimc.c | 56 ++++++++------------------------
1 file changed, 13 insertions(+), 43 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimc.c b/drivers/gpu/drm/exynos/exynos_drm_fimc.c
index 5060f8a..d40b7fb 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_fimc.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimc.c
@@ -957,43 +957,13 @@ static int fimc_dst_set_transf(struct device *dev,
return 0;
}
-static int fimc_get_ratio_shift(u32 src, u32 dst, u32 *ratio, u32 *shift)
-{
- DRM_DEBUG_KMS("src[%d]dst[%d]\n", src, dst);
-
- if (src >= dst * 64) {
- DRM_ERROR("failed to make ratio and shift.\n");
- return -EINVAL;
- } else if (src >= dst * 32) {
- *ratio = 32;
- *shift = 5;
- } else if (src >= dst * 16) {
- *ratio = 16;
- *shift = 4;
- } else if (src >= dst * 8) {
- *ratio = 8;
- *shift = 3;
- } else if (src >= dst * 4) {
- *ratio = 4;
- *shift = 2;
- } else if (src >= dst * 2) {
- *ratio = 2;
- *shift = 1;
- } else {
- *ratio = 1;
- *shift = 0;
- }
-
- return 0;
-}
-
static int fimc_set_prescaler(struct fimc_context *ctx, struct fimc_scaler *sc,
struct drm_exynos_pos *src, struct drm_exynos_pos *dst)
{
struct exynos_drm_ippdrv *ippdrv = &ctx->ippdrv;
u32 cfg, cfg_ext, shfactor;
u32 pre_dst_width, pre_dst_height;
- u32 pre_hratio, hfactor, pre_vratio, vfactor;
+ u32 hfactor, vfactor;
int ret = 0;
u32 src_w, src_h, dst_w, dst_h;
@@ -1014,24 +984,24 @@ static int fimc_set_prescaler(struct fimc_context *ctx, struct fimc_scaler *sc,
dst_h = dst->h;
}
- ret = fimc_get_ratio_shift(src_w, dst_w, &pre_hratio, &hfactor);
- if (ret) {
+ /* fimc_ippdrv_check_property assures that dividers are not null */
+ hfactor = fls(src_w / dst_w / 2);
+ if (hfactor > FIMC_SHFACTOR / 2) {
dev_err(ippdrv->dev, "failed to get ratio horizontal.\n");
- return ret;
+ return -EINVAL;
}
- ret = fimc_get_ratio_shift(src_h, dst_h, &pre_vratio, &vfactor);
- if (ret) {
+ vfactor = fls(src_h / dst_h / 2);
+ if (vfactor > FIMC_SHFACTOR / 2) {
dev_err(ippdrv->dev, "failed to get ratio vertical.\n");
- return ret;
+ return -EINVAL;
}
- pre_dst_width = src_w / pre_hratio;
- pre_dst_height = src_h / pre_vratio;
+ pre_dst_width = src_w >> hfactor;
+ pre_dst_height = src_h >> vfactor;
DRM_DEBUG_KMS("pre_dst_width[%d]pre_dst_height[%d]\n",
pre_dst_width, pre_dst_height);
- DRM_DEBUG_KMS("pre_hratio[%d]hfactor[%d]pre_vratio[%d]vfactor[%d]\n",
- pre_hratio, hfactor, pre_vratio, vfactor);
+ DRM_DEBUG_KMS("hfactor[%d]vfactor[%d]\n", hfactor, vfactor);
sc->hratio = (src_w << 14) / (dst_w << hfactor);
sc->vratio = (src_h << 14) / (dst_h << vfactor);
@@ -1044,8 +1014,8 @@ static int fimc_set_prescaler(struct fimc_context *ctx, struct fimc_scaler *sc,
DRM_DEBUG_KMS("shfactor[%d]\n", shfactor);
cfg = (EXYNOS_CISCPRERATIO_SHFACTOR(shfactor) |
- EXYNOS_CISCPRERATIO_PREHORRATIO(pre_hratio) |
- EXYNOS_CISCPRERATIO_PREVERRATIO(pre_vratio));
+ EXYNOS_CISCPRERATIO_PREHORRATIO(1 << hfactor) |
+ EXYNOS_CISCPRERATIO_PREVERRATIO(1 << vfactor));
fimc_write(cfg, EXYNOS_CISCPRERATIO);
cfg = (EXYNOS_CISCPREDST_PREDSTWIDTH(pre_dst_width) |
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists