| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <537A0AA4.50904@ti.com>
Date: Mon, 19 May 2014 16:44:04 +0300
From: Tero Kristo <t-kristo@...com>
To: Peter Ujfalusi <peter.ujfalusi@...com>, <bcousson@...libre.com>,
<tony@...mide.com>
CC: <linux-omap@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 1/2] ARM: DTS: omap54xx-clocks: remove the autoidle properties
for clock nodes
On 04/30/2014 03:30 PM, Tero Kristo wrote:
> On 04/30/2014 02:41 PM, Peter Ujfalusi wrote:
>> In OMAP5 bit 8 in PRCM registers are not defined (Reserved) unlike their
>> counterpart in OMAP4.
>> It is better to not write to these bits.
>
> Yeah, looks like this bug was copied over from the legacy clock data.
>
> Acked-by: Tero Kristo <t-kristo@...com>
Also, queued for 3.15-rc/clk-dt.
-Tero
>
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@...com>
>> ---
>> arch/arm/boot/dts/omap54xx-clocks.dtsi | 48
>> ----------------------------------
>> 1 file changed, 48 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/omap54xx-clocks.dtsi
>> b/arch/arm/boot/dts/omap54xx-clocks.dtsi
>> index d487fdab3921..d784ff5d3904 100644
>> --- a/arch/arm/boot/dts/omap54xx-clocks.dtsi
>> +++ b/arch/arm/boot/dts/omap54xx-clocks.dtsi
>> @@ -120,10 +120,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_abe_x2_ck>;
>> ti,max-div = <31>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x01f0>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> abe_24m_fclk: abe_24m_fclk {
>> @@ -164,10 +162,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_abe_x2_ck>;
>> ti,max-div = <31>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x01f4>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_core_ck: dpll_core_ck {
>> @@ -188,10 +184,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_core_x2_ck>;
>> ti,max-div = <63>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0150>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> c2c_fclk: c2c_fclk {
>> @@ -215,10 +209,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_core_x2_ck>;
>> ti,max-div = <63>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0138>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_core_h12x2_ck: dpll_core_h12x2_ck {
>> @@ -226,10 +218,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_core_x2_ck>;
>> ti,max-div = <63>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x013c>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_core_h13x2_ck: dpll_core_h13x2_ck {
>> @@ -237,10 +227,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_core_x2_ck>;
>> ti,max-div = <63>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0140>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_core_h14x2_ck: dpll_core_h14x2_ck {
>> @@ -248,10 +236,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_core_x2_ck>;
>> ti,max-div = <63>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0144>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_core_h22x2_ck: dpll_core_h22x2_ck {
>> @@ -259,10 +245,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_core_x2_ck>;
>> ti,max-div = <63>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0154>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_core_h23x2_ck: dpll_core_h23x2_ck {
>> @@ -270,10 +254,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_core_x2_ck>;
>> ti,max-div = <63>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0158>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_core_h24x2_ck: dpll_core_h24x2_ck {
>> @@ -281,10 +263,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_core_x2_ck>;
>> ti,max-div = <63>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x015c>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_core_m2_ck: dpll_core_m2_ck {
>> @@ -292,10 +272,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_core_ck>;
>> ti,max-div = <31>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0130>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_core_m3x2_ck: dpll_core_m3x2_ck {
>> @@ -303,10 +281,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_core_x2_ck>;
>> ti,max-div = <31>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0134>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> iva_dpll_hs_clk_div: iva_dpll_hs_clk_div {
>> @@ -335,10 +311,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_iva_x2_ck>;
>> ti,max-div = <63>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x01b8>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_iva_h12x2_ck: dpll_iva_h12x2_ck {
>> @@ -346,10 +320,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_iva_x2_ck>;
>> ti,max-div = <63>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x01bc>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> mpu_dpll_hs_clk_div: mpu_dpll_hs_clk_div {
>> @@ -372,10 +344,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_mpu_ck>;
>> ti,max-div = <31>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0170>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> per_dpll_hs_clk_div: per_dpll_hs_clk_div {
>> @@ -642,10 +612,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_per_x2_ck>;
>> ti,max-div = <63>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0158>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_per_h12x2_ck: dpll_per_h12x2_ck {
>> @@ -653,10 +621,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_per_x2_ck>;
>> ti,max-div = <63>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x015c>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_per_h14x2_ck: dpll_per_h14x2_ck {
>> @@ -664,10 +630,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_per_x2_ck>;
>> ti,max-div = <63>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0164>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_per_m2_ck: dpll_per_m2_ck {
>> @@ -675,10 +639,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_per_ck>;
>> ti,max-div = <31>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0150>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_per_m2x2_ck: dpll_per_m2x2_ck {
>> @@ -686,10 +648,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_per_x2_ck>;
>> ti,max-div = <31>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0150>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_per_m3x2_ck: dpll_per_m3x2_ck {
>> @@ -697,10 +657,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_per_x2_ck>;
>> ti,max-div = <31>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0154>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_unipro1_ck: dpll_unipro1_ck {
>> @@ -723,10 +681,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_unipro1_ck>;
>> ti,max-div = <127>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0210>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_unipro2_ck: dpll_unipro2_ck {
>> @@ -749,10 +705,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_unipro2_ck>;
>> ti,max-div = <127>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x01d0>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> dpll_usb_ck: dpll_usb_ck {
>> @@ -775,10 +729,8 @@
>> compatible = "ti,divider-clock";
>> clocks = <&dpll_usb_ck>;
>> ti,max-div = <127>;
>> - ti,autoidle-shift = <8>;
>> reg = <0x0190>;
>> ti,index-starts-at-one;
>> - ti,invert-autoidle-bit;
>> };
>>
>> func_128m_clk: func_128m_clk {
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists