linux-kernel - [Patch Part1 V2 27/29] x86, irq, SFI: use common irqdomain map interface to program IOAPIC pins

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1400516594-11544-28-git-send-email-jiang.liu@linux.intel.com>
Date:	Tue, 20 May 2014 00:23:11 +0800
From:	Jiang Liu <jiang.liu@...ux.intel.com>
To:	Benjamin Herrenschmidt <benh@...nel.crashing.org>,
	Thomas Gleixner <tglx@...utronix.de>,
	Grant Likely <grant.likely@...aro.org>,
	Ingo Molnar <mingo@...hat.com>,
	"H. Peter Anvin" <hpa@...or.com>,
	"Rafael J. Wysocki" <rjw@...ysocki.net>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Randy Dunlap <rdunlap@...radead.org>,
	Yinghai Lu <yinghai@...nel.org>, x86@...nel.org,
	Len Brown <lenb@...nel.org>,
	David Cohen <david.a.cohen@...ux.intel.com>,
	Kuppuswamy Sathyanarayanan 
	<sathyanarayanan.kuppuswamy@...ux.intel.com>,
	Jiang Liu <jiang.liu@...ux.intel.com>
Cc:	Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>,
	Andrew Morton <akpm@...ux-foundation.org>,
	Tony Luck <tony.luck@...el.com>,
	Joerg Roedel <joro@...tes.org>,
	Paul Gortmaker <paul.gortmaker@...driver.com>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
	linux-acpi@...r.kernel.org, "H. Peter Anvin" <hpa@...ux.intel.com>,
	sfi-devel@...plefirmware.org
Subject: [Patch Part1 V2 27/29] x86, irq, SFI: use common irqdomain map interface to program IOAPIC pins

Refine SFI to use common irqdomain map interface to program IOAPIC pins,
so we can unify the callsite to progam IOAPIC pins.

Signed-off-by: Jiang Liu <jiang.liu@...ux.intel.com>
---
 arch/x86/pci/intel_mid_pci.c      |   17 +++++++----------
 arch/x86/platform/intel-mid/sfi.c |   18 +++++++++---------
 arch/x86/platform/sfi/sfi.c       |    4 +++-
 3 files changed, 19 insertions(+), 20 deletions(-)

diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index 84b9d672843d..f6f3de857baa 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -208,23 +208,20 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
 
 static int intel_mid_pci_irq_enable(struct pci_dev *dev)
 {
-	u8 pin;
-	struct io_apic_irq_attr irq_attr;
-
-	pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+	int ioapic, polarity;
 
 	/*
 	 * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
 	 * IOAPIC RTE entries, so we just enable RTE for the device.
 	 */
-	irq_attr.ioapic = mp_find_ioapic(dev->irq);
-	irq_attr.ioapic_pin = dev->irq;
-	irq_attr.trigger = 1; /* level */
+	ioapic = mp_find_ioapic(dev->irq);
 	if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER)
-		irq_attr.polarity = 0; /* active high */
+		polarity = 0; /* active high */
 	else
-		irq_attr.polarity = 1; /* active low */
-	io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
+		polarity = 1; /* active low */
+	if (mp_set_pin_attr(ioapic, dev->irq, 1, polarity, dev_to_node(dev)))
+		return -EBUSY;
+	mp_map_gsi_to_irq(dev->irq, 1);
 
 	return 0;
 }
diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c
index 994c40bd7cb7..3fe5c23ba1c5 100644
--- a/arch/x86/platform/intel-mid/sfi.c
+++ b/arch/x86/platform/intel-mid/sfi.c
@@ -434,6 +434,7 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 	struct devs_id *dev = NULL;
 	int num, i;
 	int ioapic;
+	int polarity;
 	struct io_apic_irq_attr irq_attr;
 
 	sb = (struct sfi_table_simple *)table;
@@ -450,30 +451,29 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
 			 */
 			ioapic = mp_find_ioapic(irq);
 			if (ioapic >= 0) {
-				irq_attr.ioapic = ioapic;
-				irq_attr.ioapic_pin = irq;
-				irq_attr.trigger = 1;
 				if (intel_mid_identify_cpu() ==
 						INTEL_MID_CPU_CHIP_TANGIER) {
 					if (!strncmp(pentry->name,
 							"r69001-ts-i2c", 13))
 						/* active low */
-						irq_attr.polarity = 1;
+						polarity = 1;
 					else if (!strncmp(pentry->name,
 							"synaptics_3202", 14))
 						/* active low */
-						irq_attr.polarity = 1;
+						polarity = 1;
 					else if (irq == 41)
 						/* fast_int_1 */
-						irq_attr.polarity = 1;
+						polarity = 1;
 					else
 						/* active high */
-						irq_attr.polarity = 0;
+						polarity = 0;
 				} else {
 					/* PNW and CLV go with active low */
-					irq_attr.polarity = 1;
+					polarity = 1;
 				}
-				io_apic_set_pci_routing(NULL, irq, &irq_attr);
+				if (mp_set_pin_attr(ioapic, irq, 1, polarity, NUMA_NO_NODE))
+					return -EBUSY;
+				mp_map_gsi_to_irq(dev->irq, 1);
 			}
 		} else {
 			irq = 0; /* No irq */
diff --git a/arch/x86/platform/sfi/sfi.c b/arch/x86/platform/sfi/sfi.c
index 2c3522dfa05d..91e5046efae9 100644
--- a/arch/x86/platform/sfi/sfi.c
+++ b/arch/x86/platform/sfi/sfi.c
@@ -71,7 +71,9 @@ static int __init sfi_parse_cpus(struct sfi_table_header *table)
 #endif /* CONFIG_X86_LOCAL_APIC */
 
 #ifdef CONFIG_X86_IO_APIC
-static struct irq_domain_ops sfi_ioapic_irqdomain_ops;
+static struct irq_domain_ops sfi_ioapic_irqdomain_ops = {
+	.map = mp_irqdomain_map,
+};
 
 static struct irq_domain *sfi_ioapic_create_irqdomain(int ioapic, void *arg)
 {
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/