Message-Id: <1400517811-24668-4-git-send-email-sebastian.hesselbarth@gmail.com>
Date:	Mon, 19 May 2014 18:43:24 +0200
From:	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
To:	Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
Cc:	Alexandre Belloni <alexandre.belloni@...e-electrons.com>,
	Mike Turquette <mturquette@...aro.org>,
	Jisheng Zhang <jszhang@...vell.com>,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 03/10] clk: berlin: add driver for BG2x audio/video PLL

This is a driver for the AVPLLs built upon a VCO with 8 channels each
found on Marvell Berlin2 SoCs. While both VCOs found on BG2/BG2CD share
the same register set, sometimes registers shifts for one of the VCOs
are a bit off. Nothing serious that should require a separate driver,
so deal with both VCOs in a single driver instead.

Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
---
Changelog:
v1->v2:
- separate include for AVPLL driver
- split single clock driver for both VCO and 8 channels into separate
  drivers for VCO and each channel. BG2Q will be different to BG2/BG2CD
  and it allows us to shove in CCF flags for each of the channels.
  (Suggested by Alexandre Belloni, Mike Turquette)

Cc: Mike Turquette <mturquette@...aro.org>
Cc: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Cc: Jisheng Zhang <jszhang@...vell.com>
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-kernel@...r.kernel.org
---
 drivers/clk/Makefile               |   1 +
 drivers/clk/berlin/Makefile        |   1 +
 drivers/clk/berlin/berlin2-avpll.c | 393 +++++++++++++++++++++++++++++++++++++
 drivers/clk/berlin/berlin2-avpll.h |  36 ++++
 4 files changed, 431 insertions(+)
 create mode 100644 drivers/clk/berlin/Makefile
 create mode 100644 drivers/clk/berlin/berlin2-avpll.c
 create mode 100644 drivers/clk/berlin/berlin2-avpll.h

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 5f8a28735c96..f651b2ace915 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_COMMON_CLK_WM831X)		+= clk-wm831x.o
 obj-$(CONFIG_COMMON_CLK_XGENE)		+= clk-xgene.o
 obj-$(CONFIG_COMMON_CLK_AT91)		+= at91/
 obj-$(CONFIG_ARCH_BCM_MOBILE)		+= bcm/
+obj-$(CONFIG_ARCH_BERLIN)		+= berlin/
 obj-$(CONFIG_ARCH_HI3xxx)		+= hisilicon/
 obj-$(CONFIG_ARCH_HIP04)		+= hisilicon/
 obj-$(CONFIG_COMMON_CLK_KEYSTONE)	+= keystone/
diff --git a/drivers/clk/berlin/Makefile b/drivers/clk/berlin/Makefile
new file mode 100644
index 000000000000..5905733fc7c7
--- /dev/null
+++ b/drivers/clk/berlin/Makefile
@@ -0,0 +1 @@
+obj-y += berlin2-avpll.o
diff --git a/drivers/clk/berlin/berlin2-avpll.c b/drivers/clk/berlin/berlin2-avpll.c
new file mode 100644
index 000000000000..fd0f26c38465
--- /dev/null
+++ b/drivers/clk/berlin/berlin2-avpll.c
@@ -0,0 +1,393 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
+ * Alexandre Belloni <alexandre.belloni@...e-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+
+#include "berlin2-avpll.h"
+
+/*
+ * Berlin2 SoCs comprise up to two PLLs called AVPLL built upon a
+ * VCO with 8 channels each, channel 8 is the odd-one-out and does
+ * not provide mul/div.
+ *
+ * Unfortunately, its registers are not named but just numbered. To
+ * get in at least some kind of structure, we split each AVPLL into
+ * the VCOs and each channel into separate clock drivers.
+ *
+ * Also, here and there the VCO registers are a bit different with
+ * respect to bit shifts. Make sure to add a comment for those.
+ */
+#define NUM_CHANNELS	8
+
+#define AVPLL_CTRL(x)		((x) * 0x4)
+
+#define VCO_CTRL0		AVPLL_CTRL(0)
+/* BG2/BG2CDs VCO_B has an additional shift of 4 for its VCO_CTRL0 reg */
+#define  VCO_RESET		BIT(0)
+#define  VCO_POWERUP		BIT(1)
+#define  VCO_INTERPOL_SHIFT	2
+#define  VCO_INTERPOL_MASK	(0xf << VCO_INTERPOL_SHIFT)
+#define  VCO_REG1V45_SEL_SHIFT	6
+#define  VCO_REG1V45_SEL(x)	((x) << VCO_REG1V45_SEL_SHIFT)
+#define  VCO_REG1V45_SEL_1V40	VCO_REG1V45_SEL(0)
+#define  VCO_REG1V45_SEL_1V45	VCO_REG1V45_SEL(1)
+#define  VCO_REG1V45_SEL_1V50	VCO_REG1V45_SEL(2)
+#define  VCO_REG1V45_SEL_1V55	VCO_REG1V45_SEL(3)
+#define  VCO_REG1V45_SEL_MASK	VCO_REG1V45_SEL(3)
+#define  VCO_REG0V9_SEL_SHIFT	8
+#define  VCO_REG0V9_SEL_MASK	(0xf << VCO_REG0V9_SEL_SHIFT)
+#define  VCO_VTHCAL_SHIFT	12
+#define  VCO_VTHCAL(x)		((x) << VCO_VTHCAL_SHIFT)
+#define  VCO_VTHCAL_0V90	VCO_VTHCAL(0)
+#define  VCO_VTHCAL_0V95	VCO_VTHCAL(1)
+#define  VCO_VTHCAL_1V00	VCO_VTHCAL(2)
+#define  VCO_VTHCAL_1V05	VCO_VTHCAL(3)
+#define  VCO_VTHCAL_MASK	VCO_VTHCAL(3)
+#define  VCO_KVCOEXT_SHIFT	14
+#define  VCO_KVCOEXT_MASK	(0x3 << VCO_KVCOEXT_SHIFT)
+#define  VCO_KVCOEXT_ENABLE	BIT(17)
+#define  VCO_V2IEXT_SHIFT	18
+#define  VCO_V2IEXT_MASK	(0xf << VCO_V2IEXT_SHIFT)
+#define  VCO_V2IEXT_ENABLE	BIT(22)
+#define  VCO_SPEED_SHIFT	23
+#define  VCO_SPEED(x)		((x) << VCO_SPEED_SHIFT)
+#define  VCO_SPEED_1G08_1G21	VCO_SPEED(0)
+#define  VCO_SPEED_1G21_1G40	VCO_SPEED(1)
+#define  VCO_SPEED_1G40_1G61	VCO_SPEED(2)
+#define  VCO_SPEED_1G61_1G86	VCO_SPEED(3)
+#define  VCO_SPEED_1G86_2G00	VCO_SPEED(4)
+#define  VCO_SPEED_2G00_2G22	VCO_SPEED(5)
+#define  VCO_SPEED_2G22		VCO_SPEED(6)
+#define  VCO_SPEED_MASK		VCO_SPEED(0x7)
+#define  VCO_CLKDET_ENABLE	BIT(26)
+#define VCO_CTRL1		AVPLL_CTRL(1)
+#define  VCO_REFDIV_SHIFT	0
+#define  VCO_REFDIV(x)		((x) << VCO_REFDIV_SHIFT)
+#define  VCO_REFDIV_1		VCO_REFDIV(0)
+#define  VCO_REFDIV_2		VCO_REFDIV(1)
+#define  VCO_REFDIV_4		VCO_REFDIV(2)
+#define  VCO_REFDIV_3		VCO_REFDIV(3)
+#define  VCO_REFDIV_MASK	VCO_REFDIV(0x3f)
+#define  VCO_FBDIV_SHIFT	6
+#define  VCO_FBDIV(x)		((x) << VCO_FBDIV_SHIFT)
+#define  VCO_FBDIV_MASK		VCO_FBDIV(0xff)
+#define  VCO_ICP_SHIFT		14
+/* PLL Charge Pump Current = 10uA * (x + 1) */
+#define  VCO_ICP(x)		((x) << VCO_ICP_SHIFT)
+#define  VCO_ICP_MASK		VCO_ICP(0xf)
+#define  VCO_LOAD_CAP		BIT(18)
+#define  VCO_CALIBRATION_START	BIT(19)
+#define VCO_FREQOFFSETn(x)	AVPLL_CTRL(3 + (x))
+#define  VCO_FREQOFFSET_MASK	0x7ffff
+#define VCO_CTRL10		AVPLL_CTRL(10)
+#define  VCO_POWERUP_CH1	BIT(20)
+#define VCO_CTRL11		AVPLL_CTRL(11)
+#define VCO_CTRL12		AVPLL_CTRL(12)
+#define VCO_CTRL13		AVPLL_CTRL(13)
+#define VCO_CTRL14		AVPLL_CTRL(14)
+#define VCO_CTRL15		AVPLL_CTRL(15)
+#define VCO_SYNC1n(x)		AVPLL_CTRL(15 + (x))
+#define  VCO_SYNC1_MASK		0x1ffff
+#define VCO_SYNC2n(x)		AVPLL_CTRL(23 + (x))
+#define  VCO_SYNC2_MASK		0x1ffff
+#define VCO_CTRL30		AVPLL_CTRL(30)
+#define  VCO_DPLL_CH1_ENABLE	BIT(17)
+
+struct berlin2_avpll_vco {
+	struct clk_hw hw;
+	void __iomem *base;
+	u8 flags;
+};
+
+#define to_avpll_vco(hw) container_of(hw, struct berlin2_avpll_vco, hw)
+
+static int berlin2_avpll_vco_is_enabled(struct clk_hw *hw)
+{
+	struct berlin2_avpll_vco *vco = to_avpll_vco(hw);
+	u32 reg;
+
+	reg = readl_relaxed(vco->base + VCO_CTRL0);
+	if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK)
+		reg >>= 4;
+
+	return !!(reg & VCO_POWERUP);
+}
+
+static int berlin2_avpll_vco_enable(struct clk_hw *hw)
+{
+	struct berlin2_avpll_vco *vco = to_avpll_vco(hw);
+	u32 reg;
+
+	reg = readl_relaxed(vco->base + VCO_CTRL0);
+	if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK)
+		reg |= VCO_POWERUP << 4;
+	else
+		reg |= VCO_POWERUP;
+	writel_relaxed(reg, vco->base + VCO_CTRL0);
+
+	return 0;
+}
+
+static void berlin2_avpll_vco_disable(struct clk_hw *hw)
+{
+	struct berlin2_avpll_vco *vco = to_avpll_vco(hw);
+	u32 reg;
+
+	reg = readl_relaxed(vco->base + VCO_CTRL0);
+	if (vco->flags & BERLIN2_AVPLL_BIT_QUIRK)
+		reg &= ~(VCO_POWERUP << 4);
+	else
+		reg &= ~VCO_POWERUP;
+	writel_relaxed(reg, vco->base + VCO_CTRL0);
+}
+
+static u8 vco_refdiv[] = { 1, 2, 4, 3 };
+
+static unsigned long
+berlin2_avpll_vco_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	struct berlin2_avpll_vco *vco = to_avpll_vco(hw);
+	u32 reg, refdiv, fbdiv;
+	u64 freq = parent_rate;
+
+	/* AVPLL VCO frequency: Fvco = (Fref / refdiv) * fbdiv */
+	reg = readl_relaxed(vco->base + VCO_CTRL1);
+	refdiv = (reg & VCO_REFDIV_MASK) >> VCO_REFDIV_SHIFT;
+	refdiv = vco_refdiv[refdiv];
+	fbdiv = (reg & VCO_FBDIV_MASK) >> VCO_FBDIV_SHIFT;
+	freq *= fbdiv;
+	do_div(freq, refdiv);
+
+	return (unsigned long)freq;
+}
+
+static const struct clk_ops berlin2_avpll_vco_ops = {
+	.is_enabled	= berlin2_avpll_vco_is_enabled,
+	.enable		= berlin2_avpll_vco_enable,
+	.disable	= berlin2_avpll_vco_disable,
+	.recalc_rate	= berlin2_avpll_vco_recalc_rate,
+};
+
+struct clk * __init berlin2_avpll_vco_register(void __iomem *base,
+			       const char *name, const char *parent_name,
+			       u8 vco_flags, unsigned long flags)
+{
+	struct berlin2_avpll_vco *vco;
+	struct clk_init_data init;
+
+	vco = kzalloc(sizeof(*vco), GFP_KERNEL);
+	if (!vco)
+		return ERR_PTR(-ENOMEM);
+
+	vco->base = base;
+	vco->flags = vco_flags;
+	vco->hw.init = &init;
+	init.name = name;
+	init.ops = &berlin2_avpll_vco_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	init.flags = flags;
+
+	return clk_register(NULL, &vco->hw);
+}
+
+struct berlin2_avpll_channel {
+	struct clk_hw hw;
+	void __iomem *base;
+	u8 flags;
+	u8 index;
+};
+
+#define to_avpll_channel(hw) container_of(hw, struct berlin2_avpll_channel, hw)
+
+static int berlin2_avpll_channel_is_enabled(struct clk_hw *hw)
+{
+	struct berlin2_avpll_channel *ch = to_avpll_channel(hw);
+	u32 reg;
+
+	if (ch->index == 7)
+		return 1;
+
+	reg = readl_relaxed(ch->base + VCO_CTRL10);
+	reg &= VCO_POWERUP_CH1 << ch->index;
+
+	return !!reg;
+}
+
+static int berlin2_avpll_channel_enable(struct clk_hw *hw)
+{
+	struct berlin2_avpll_channel *ch = to_avpll_channel(hw);
+	u32 reg;
+
+	reg = readl_relaxed(ch->base + VCO_CTRL10);
+	reg |= VCO_POWERUP_CH1 << ch->index;
+	writel_relaxed(reg, ch->base + VCO_CTRL10);
+
+	return 0;
+}
+
+static void berlin2_avpll_channel_disable(struct clk_hw *hw)
+{
+	struct berlin2_avpll_channel *ch = to_avpll_channel(hw);
+	u32 reg;
+
+	reg = readl_relaxed(ch->base + VCO_CTRL10);
+	reg &= ~(VCO_POWERUP_CH1 << ch->index);
+	writel_relaxed(reg, ch->base + VCO_CTRL10);
+}
+
+static const u8 div_hdmi[] = { 1, 2, 4, 6 };
+static const u8 div_av1[] = { 1, 2, 5, 5 };
+
+static unsigned long
+berlin2_avpll_channel_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+{
+	struct berlin2_avpll_channel *ch = to_avpll_channel(hw);
+	u32 reg, div_av2, div_av3, divider = 1;
+	u64 freq = parent_rate;
+
+	reg = readl_relaxed(ch->base + VCO_CTRL30);
+	if ((reg & (VCO_DPLL_CH1_ENABLE << ch->index)) == 0)
+		goto skip_div;
+
+	/*
+	 * Fch = (Fref * sync2) /
+	 *    (sync1 * div_hdmi * div_av1 * div_av2 * div_av3)
+	 */
+
+	reg = readl_relaxed(ch->base + VCO_SYNC1n(ch->index));
+	/* BG2/BG2CDs SYNC1 reg on AVPLL_B channel 1 is shifted by 4 */
+	if (ch->flags & BERLIN2_AVPLL_BIT_QUIRK && ch->index == 0)
+		reg >>= 4;
+	divider = reg & VCO_SYNC1_MASK;
+
+	reg = readl_relaxed(ch->base + VCO_SYNC2n(ch->index));
+	freq *= reg & VCO_SYNC2_MASK;
+
+	/* Channel 8 has no dividers */
+	if (ch->index == 7)
+		goto skip_div;
+
+	/*
+	 * HDMI divider start at VCO_CTRL11, bit 7; MSB is enable, lower 2 bit
+	 * determine divider.
+	 */
+	reg = readl_relaxed(ch->base + VCO_CTRL11) >> 7;
+	reg = (reg >> (ch->index * 3));
+	if (reg & BIT(2))
+		divider *= div_hdmi[reg & 0x3];
+
+	/*
+	 * AV1 divider start at VCO_CTRL11, bit 28; MSB is enable, lower 2 bit
+	 * determine divider.
+	 */
+	if (ch->index == 0) {
+		reg = readl_relaxed(ch->base + VCO_CTRL11);
+		reg >>= 28;
+	} else {
+		reg = readl_relaxed(ch->base + VCO_CTRL12);
+		reg >>= (ch->index-1) * 3;
+	}
+	if (reg & BIT(2))
+		divider *= div_av1[reg & 0x3];
+
+	/*
+	 * AV2 divider start at VCO_CTRL12, bit 18; each 7 bits wide,
+	 * zero is not a valid value.
+	 */
+	if (ch->index < 2) {
+		reg = readl_relaxed(ch->base + VCO_CTRL12);
+		reg >>= 18 + (ch->index * 7);
+	} else if (ch->index < 7) {
+		reg = readl_relaxed(ch->base + VCO_CTRL13);
+		reg >>= (ch->index - 2) * 7;
+	} else {
+		reg = readl_relaxed(ch->base + VCO_CTRL14);
+	}
+	div_av2 = reg & 0x7f;
+	if (div_av2)
+		divider *= div_av2;
+
+	/*
+	 * AV3 divider start at VCO_CTRL14, bit 7; each 4 bits wide.
+	 * AV2/AV3 form a fractional divider, where only specfic values for AV3
+	 * are allowed. AV3 != 0 divides by AV2/2, AV3=0 is bypass.
+	 */
+	if (ch->index < 6) {
+		reg = readl_relaxed(ch->base + VCO_CTRL14);
+		reg >>= 7 + (ch->index * 4);
+	} else {
+		reg = readl_relaxed(ch->base + VCO_CTRL15);
+	}
+	div_av3 = reg & 0xf;
+	if (div_av2 && div_av3)
+		freq *= 2;
+
+skip_div:
+	do_div(freq, divider);
+	return (unsigned long)freq;
+}
+
+static const struct clk_ops berlin2_avpll_channel_ops = {
+	.is_enabled	= berlin2_avpll_channel_is_enabled,
+	.enable		= berlin2_avpll_channel_enable,
+	.disable	= berlin2_avpll_channel_disable,
+	.recalc_rate	= berlin2_avpll_channel_recalc_rate,
+};
+
+/*
+ * Another nice quirk:
+ * On some production SoCs, AVPLL channels are scrambled with respect
+ * to the channel numbering in the registers but still referenced by
+ * their original channel numbers. We deal with it by having a flag
+ * and a translation table for the index.
+ */
+static const u8 quirk_index[] __initconst = { 0, 6, 5, 4, 3, 2, 1, 7 };
+
+struct clk * __init berlin2_avpll_channel_register(void __iomem *base,
+			   const char *name, u8 index, const char *parent_name,
+			   u8 ch_flags, unsigned long flags)
+{
+	struct berlin2_avpll_channel *ch;
+	struct clk_init_data init;
+
+	ch = kzalloc(sizeof(*ch), GFP_KERNEL);
+	if (!ch)
+		return ERR_PTR(-ENOMEM);
+
+	ch->base = base;
+	if (ch_flags & BERLIN2_AVPLL_SCRAMBLE_QUIRK)
+		ch->index = quirk_index[index];
+	else
+		ch->index = index;
+
+	ch->flags = ch_flags;
+	ch->hw.init = &init;
+	init.name = name;
+	init.ops = &berlin2_avpll_channel_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	init.flags = flags;
+
+	return clk_register(NULL, &ch->hw);
+}
diff --git a/drivers/clk/berlin/berlin2-avpll.h b/drivers/clk/berlin/berlin2-avpll.h
new file mode 100644
index 000000000000..a37f5068d299
--- /dev/null
+++ b/drivers/clk/berlin/berlin2-avpll.h
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2014 Marvell Technology Group Ltd.
+ *
+ * Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>
+ * Alexandre Belloni <alexandre.belloni@...e-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __BERLIN2_AVPLL_H
+#define __BERLIN2_AVPLL_H
+
+struct clk;
+
+#define BERLIN2_AVPLL_BIT_QUIRK		BIT(0)
+#define BERLIN2_AVPLL_SCRAMBLE_QUIRK	BIT(1)
+
+struct clk * __init
+berlin2_avpll_vco_register(void __iomem *base, const char *name,
+	   const char *parent_name, u8 vco_flags, unsigned long flags);
+
+struct clk * __init
+berlin2_avpll_channel_register(void __iomem *base, const char *name,
+		       u8 index, const char *parent_name, u8 ch_flags,
+		       unsigned long flags);
+
+#endif /* __BERLIN2_AVPLL_H */
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists