| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9418505.z3DUuJxW0Y@vostro.rjw.lan>
Date: Tue, 20 May 2014 01:23 +0200
From: "Rafael J. Wysocki" <rjw@...ysocki.net>
To: Philipp Zabel <p.zabel@...gutronix.de>
Cc: Viresh Kumar <viresh.kumar@...aro.org>,
Shawn Guo <shawn.guo@...escale.com>, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, kernel@...gutronix.de
Subject: Re: [PATCH RESEND 1/2] cpufreq: imx6q: Drop devm_clk/regulator_get usage
On Wednesday, May 14, 2014 06:02:23 PM Philipp Zabel wrote:
> This driver is using devres managed calls incorrectly, giving the cpu0
> device as first parameter instead of the cpufreq platform device.
> This results in resources not being freed if the cpufreq platform device
> is unbound, for example if probing has to be deferred for a missing
> regulator.
> Supporting probe deferral properly is a prerequisite to enabling the
> internal LDO bypass on i.MX6 and regulating the CPU voltage with an
> external regulator.
>
> Acked-by: Viresh Kumar <viresh.kumar@...aro.org>
> Acked-by: Shawn Guo <shawn.guo@...escale.com>
> Signed-off-by: Philipp Zabel <p.zabel@...gutronix.de>
Both patches queued up for 3.16, thanks!
> ---
> Resent to linux-pm@...r.kernel.org instead of cpufreq@...r.kernel.org.
> ---
> drivers/cpufreq/imx6q-cpufreq.c | 53 ++++++++++++++++++++++++++++++-----------
> 1 file changed, 39 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
> index e27fca8..92a82ec 100644
> --- a/drivers/cpufreq/imx6q-cpufreq.c
> +++ b/drivers/cpufreq/imx6q-cpufreq.c
> @@ -170,25 +170,25 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
> return -ENOENT;
> }
>
> - arm_clk = devm_clk_get(cpu_dev, "arm");
> - pll1_sys_clk = devm_clk_get(cpu_dev, "pll1_sys");
> - pll1_sw_clk = devm_clk_get(cpu_dev, "pll1_sw");
> - step_clk = devm_clk_get(cpu_dev, "step");
> - pll2_pfd2_396m_clk = devm_clk_get(cpu_dev, "pll2_pfd2_396m");
> + arm_clk = clk_get(cpu_dev, "arm");
> + pll1_sys_clk = clk_get(cpu_dev, "pll1_sys");
> + pll1_sw_clk = clk_get(cpu_dev, "pll1_sw");
> + step_clk = clk_get(cpu_dev, "step");
> + pll2_pfd2_396m_clk = clk_get(cpu_dev, "pll2_pfd2_396m");
> if (IS_ERR(arm_clk) || IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk) ||
> IS_ERR(step_clk) || IS_ERR(pll2_pfd2_396m_clk)) {
> dev_err(cpu_dev, "failed to get clocks\n");
> ret = -ENOENT;
> - goto put_node;
> + goto put_clk;
> }
>
> - arm_reg = devm_regulator_get(cpu_dev, "arm");
> - pu_reg = devm_regulator_get(cpu_dev, "pu");
> - soc_reg = devm_regulator_get(cpu_dev, "soc");
> + arm_reg = regulator_get(cpu_dev, "arm");
> + pu_reg = regulator_get(cpu_dev, "pu");
> + soc_reg = regulator_get(cpu_dev, "soc");
> if (IS_ERR(arm_reg) || IS_ERR(pu_reg) || IS_ERR(soc_reg)) {
> dev_err(cpu_dev, "failed to get regulators\n");
> ret = -ENOENT;
> - goto put_node;
> + goto put_reg;
> }
>
> /*
> @@ -201,21 +201,21 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
> ret = of_init_opp_table(cpu_dev);
> if (ret < 0) {
> dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
> - goto put_node;
> + goto put_reg;
> }
>
> num = dev_pm_opp_get_opp_count(cpu_dev);
> if (num < 0) {
> ret = num;
> dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
> - goto put_node;
> + goto put_reg;
> }
> }
>
> ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
> if (ret) {
> dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
> - goto put_node;
> + goto put_reg;
> }
>
> /* Make imx6_soc_volt array's size same as arm opp number */
> @@ -301,7 +301,24 @@ soc_opp_out:
>
> free_freq_table:
> dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
> -put_node:
> +put_reg:
> + if (!IS_ERR(arm_reg))
> + regulator_put(arm_reg);
> + if (!IS_ERR(pu_reg))
> + regulator_put(pu_reg);
> + if (!IS_ERR(soc_reg))
> + regulator_put(soc_reg);
> +put_clk:
> + if (!IS_ERR(arm_clk))
> + clk_put(arm_clk);
> + if (!IS_ERR(pll1_sys_clk))
> + clk_put(pll1_sys_clk);
> + if (!IS_ERR(pll1_sw_clk))
> + clk_put(pll1_sw_clk);
> + if (!IS_ERR(step_clk))
> + clk_put(step_clk);
> + if (!IS_ERR(pll2_pfd2_396m_clk))
> + clk_put(pll2_pfd2_396m_clk);
> of_node_put(np);
> return ret;
> }
> @@ -310,6 +327,14 @@ static int imx6q_cpufreq_remove(struct platform_device *pdev)
> {
> cpufreq_unregister_driver(&imx6q_cpufreq_driver);
> dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
> + regulator_put(arm_reg);
> + regulator_put(pu_reg);
> + regulator_put(soc_reg);
> + clk_put(arm_clk);
> + clk_put(pll1_sys_clk);
> + clk_put(pll1_sw_clk);
> + clk_put(step_clk);
> + clk_put(pll2_pfd2_396m_clk);
>
> return 0;
> }
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists