| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 21 May 2014 09:20:14 +0100
From: Lee Jones <lee.jones@...aro.org>
To: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
maxime.coquelin@...com, patrice.chotard@...com
Cc: lee.jones@...aro.org, kernel@...inux.com
Subject: [PATCH 2/3] ARM: sti: stih416: Enable board LED support for B2020 RevE
There are two LEDs available on the B2020 RevE board, one red, one
green. In this patch we enable the red one for "heartbeat" and turn
the green one off.
Signed-off-by: Lee Jones <lee.jones@...aro.org>
---
arch/arm/boot/dts/stih416-b2020-revE.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/stih416-b2020-revE.dts b/arch/arm/boot/dts/stih416-b2020-revE.dts
index 202919a..0a33739 100644
--- a/arch/arm/boot/dts/stih416-b2020-revE.dts
+++ b/arch/arm/boot/dts/stih416-b2020-revE.dts
@@ -14,6 +14,20 @@
compatible = "st,stih416-b2020", "st,stih416";
soc {
+ leds {
+ compatible = "gpio-leds";
+ red {
+ #gpio-cells = <1>;
+ label = "Front Panel LED";
+ gpios = <&PIO4 1>;
+ linux,default-trigger = "heartbeat";
+ };
+ green {
+ gpios = <&PIO1 3>;
+ default-state = "off";
+ };
+ };
+
ethernet1: ethernet@...08000 {
snps,reset-gpio = <&PIO0 7>;
};
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists