[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date: Tue, 20 May 2014 21:30:27 -0400
From: Jason Cooper <jason@...edaemon.net>
To: Florian Fainelli <f.fainelli@...il.com>
Cc: arm@...nel.org, Brian Norris <computersforpeace@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Pawel Moll <pawel.moll@....com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Randy Dunlap <rdunlap@...radead.org>,
Thomas Gleixner <tglx@...utronix.de>,
"open list:OPEN FIRMWARE AND..." <devicetree@...r.kernel.org>,
"open list:DOCUMENTATION" <linux-doc@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>,
linux-arm-kernel@...r.kernel.org
Subject: Re: [PATCH RESEND 2/2] Documentation: add Broadcom STB Level-2
interrupt controller binding
On Tue, May 20, 2014 at 12:13:49PM -0700, Florian Fainelli wrote:
> This patch adds the Device Tree binding document for the Broadcom
> Set-top-box Level 2 interrupt controller hardware.
>
> Signed-off-by: Brian Norris <computersforpeace@...il.com>
> Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
> ---
> .../bindings/interrupt-controller/brcm,l2-intc.txt | 29 ++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
> new file mode 100644
> index 000000000000..448273a30a11
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt
> @@ -0,0 +1,29 @@
> +Broadcom Generic Level 2 Interrupt Controller
> +
> +Required properties:
> +
> +- compatible: should be "brcm,l2-intc"
> +- reg: specifies the base physical address and size of the registers
> +- interrupt-controller: identifies the node as an interrupt controller
> +- #interrupt-cells: specifies the number of cells needed to encode an
> + interrupt source. Should be 1.
> +- interrupt-parent: specifies the phandle to the parent interrupt controller
> + this controller is cacaded from
> +- interrupts: specifies the interrupt line in the interrupt-parent irq space
> + to be used for cascading
> +
> +Optional properties:
> +
> +- brcm,irq-can-wake: If present, this means the L2 controller can be used as a
> + wakeup source for system suspend/resume.
Do we need a vendor-specific property here? I'd much prefer to see a
generic implementation.
thx,
Jason.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists