[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <537CBE99.9090800@ti.com>
Date: Wed, 21 May 2014 17:56:25 +0300
From: Ivan Khoronzhuk <ivan.khoronzhuk@...com>
To: <santosh.shilimkar@...com>
CC: <galak@...eaurora.org>, <linux@....linux.org.uk>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<robh+dt@...nel.org>, <linux-arm-kernel@...ts.infradead.org>,
<grygorii.strashko@...com>, <m-karicheri2@...com>
Subject: Re: [Patch] ARM: dts: keystone: add pll controller syscon entry
Ignore this. It'll be included in "Introduce keystone reset driver"
patch series
On 05/21/2014 05:17 PM, Ivan Khoronzhuk wrote:
> The pll controller register set includes sets of registers with
> different purposes, so it's logically to add syscon entry to be able
> to access them from appropriate places.
>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@...com>
> ---
>
> Based on linux-next/master
>
> arch/arm/boot/dts/keystone.dtsi | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
> index d9f99e7..5e67c5b 100644
> --- a/arch/arm/boot/dts/keystone.dtsi
> +++ b/arch/arm/boot/dts/keystone.dtsi
> @@ -66,6 +66,11 @@
> ranges = <0x0 0x0 0x0 0xc0000000>;
> dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
>
> + pllctrl: pll_controller {
> + compatible = "ti,keystone-pllctrl", "syscon";
> + reg = <0x2310000 0x200>;
> + };
> +
> rstctrl: reset-controller {
> compatible = "ti,keystone-reset";
> reg = <0x023100e8 4>; /* pll reset control reg */
--
Regards,
Ivan Khoronzhuk
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists