[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20140522113119.GA2646@pratyush-vbox>
Date: Thu, 22 May 2014 17:01:19 +0530
From: Pratyush Anand <pratyush.anand@...com>
To: "Arnd Bergmann (arnd@...db.de)" <arnd@...db.de>,
"'Bjorn Helgaas' (bhelgaas@...gle.com)" <bhelgaas@...gle.com>
Cc: Mohit KUMAR <mohit.kumar@...com>,
spear-devel <spear-devel@...t.st.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
Mark Nicholson <mark@...holnet.com>
Subject: Re: [PATCH V8 0/9] PCI: Add SPEAr13xx PCie support
Hi Arnd/Bjorn,
On Mon, May 19, 2014 at 07:55:12PM +0800, Mohit KUMAR wrote:
> Hello Arnd,
>
> > -----Original Message-----
> > From: Mohit KUMAR DCG
> > Sent: Tuesday, April 15, 2014 5:20 PM
> > To: spear-devel; linux-kernel@...r.kernel.org; devicetree@...r.kernel.org;
> > linux-pci@...r.kernel.org; linux-arm-kernel@...ts.infradead.org
> > Cc: Mohit KUMAR DCG
> > Subject: [PATCH V8 0/9] PCI: Add SPEAr13xx PCie support
> >
> > Patch# 1 and 2: Improvement and fixes for SPEAr13xx support.
> > Patch# 3,4 and 6: Add DT bindings for spear1310/40-miphy, misc and pcie
> > node Patch# 5: Add spear1310/40-miphy driver and support for spear1310/40
> > miphy wrapper.
> > Patch# 7-9: Add SPEAr13xx PCIe driver and dt support.
> >
> > These pathes are tested with linux-3.15 tag of arm-soc tree.
> > Tested with SPEAr1310 evaluation board with:
> > - INTEL PRO 100/100 EP card
> > - USB xhci gen2 card
> > - Above cards connected through LeCROY PTC switch
> >
> > Modifications for SATA are tested with SPEAr1340-evb board
> >
>
> I think 3.16 windows is about to close, are you planning to merge this series?
> Pls let me know if something pending on our part.
If you could let us know the status of this patch series inclusion.
Regards
Pratyush
>
> Regards
> Mohit
>
> > Changes since v7:
> > - Rebase over for-linus-3.15 tag of arm-soc tree so that complete patch series
> > can be applied cleanly.
> > - Incorporated few comments on comment style and superfluous comments
> > Changes since v6:
> > - Split miphy driver for SPEAr1310 and SPEAr1340
> > - Some cleanup and incorporated other minor comments Changes since v5:
> > - Split DT bindings for misc, miphy-40lp and pcie node into sepearte patches
> > - Merge config options PCIE_SPEAR13XX and PCI_MSI into defconfig patch
> > - Incorporated other minor comments
> > Changes since v4:
> > - Uses per device function pointers passed from .data field to
> > the of_device_id instead of of_device_is_compatible.
> > - Incorporated other minor comments from v4
> >
> > Changes since v3:
> > - Phy driver renamed to phy-miphy40lp
> > - ahci phy hook patch used as suggested by Arnd
> > - Incorporated other minor comments from v3
> >
> > Changes since v2:
> > - Incorporated comments to move SPEAr13xx PCIe and SATA phy specific
> > routines to
> > the phy framework
> > - Modify ahci driver to include phy hooks
> > - phy-core driver modifications for subsys_initcall()
> >
> > Changes since v1:
> > - Few patches of the series are already accepted and applied to mainline e.g.
> > pcie designware driver improvements,fixes for IO translation bug, PCIe dw
> > driver maintainer. So dropped these from v2.
> > - Incorporated comment to move the common/reset PCIe code to the
> > seperate driver
> > - PCIe and SATA share common PHY configuration registers, so move SATA
> > platform code to the system config driver Fourth patch is improves pcie
> > designware driver and fixes the IO translation bug. IO translation bug fix
> > leads to the working of PCIe EP devices connected to RC through switch.
> >
> > Mohit Kumar (1):
> > SPEAr13xx: defconfig: Update
> >
> > Pratyush Anand (8):
> > clk: SPEAr13XX: Fix pcie clock name
> > SPEAr13XX: Fix static mapping table
> > phy: SPEAr1310/40-miphy: Add binding information
> > SPEAr: misc: Add binding information
> > phy: SPEAr1310/40-miphy: Add phy driver for PCIe and SATA
> > SPEAr13XX: Add binding information for PCIe controller
> > SPEAr13XX: dts: Add PCIe node information
> > pcie: SPEAr13xx: Add designware wrapper support
> >
> > .../devicetree/bindings/arm/spear-misc.txt | 9 +
> > .../devicetree/bindings/pci/spear13xx-pcie.txt | 14 +
> > .../devicetree/bindings/phy/st-spear1310-miphy.txt | 12 +
> > .../devicetree/bindings/phy/st-spear1340-miphy.txt | 11 +
> > MAINTAINERS | 6 +
> > arch/arm/boot/dts/spear1310-evb.dts | 4 +
> > arch/arm/boot/dts/spear1310.dtsi | 93 +++++-
> > arch/arm/boot/dts/spear1340-evb.dts | 4 +
> > arch/arm/boot/dts/spear1340.dtsi | 30 ++-
> > arch/arm/boot/dts/spear13xx.dtsi | 9 +-
> > arch/arm/configs/spear13xx_defconfig | 16 +
> > arch/arm/mach-spear/Kconfig | 4 +
> > arch/arm/mach-spear/include/mach/spear.h | 4 +-
> > arch/arm/mach-spear/spear1340.c | 127 +------
> > arch/arm/mach-spear/spear13xx.c | 2 +-
> > drivers/clk/spear/spear1310_clock.c | 6 +-
> > drivers/clk/spear/spear1340_clock.c | 2 +-
> > drivers/pci/host/Kconfig | 8 +
> > drivers/pci/host/Makefile | 1 +
> > drivers/pci/host/pcie-spear13xx.c | 407 ++++++++++++++++++++
> > drivers/phy/Kconfig | 12 +
> > drivers/phy/Makefile | 2 +
> > drivers/phy/phy-spear1310-miphy.c | 274 +++++++++++++
> > drivers/phy/phy-spear1340-miphy.c | 300 ++++++++++++++
> > 24 files changed, 1218 insertions(+), 139 deletions(-) create mode 100644
> > Documentation/devicetree/bindings/arm/spear-misc.txt
> > create mode 100644 Documentation/devicetree/bindings/pci/spear13xx-
> > pcie.txt
> > create mode 100644 Documentation/devicetree/bindings/phy/st-
> > spear1310-miphy.txt
> > create mode 100644 Documentation/devicetree/bindings/phy/st-
> > spear1340-miphy.txt
> > create mode 100644 drivers/pci/host/pcie-spear13xx.c create mode 100644
> > drivers/phy/phy-spear1310-miphy.c create mode 100644 drivers/phy/phy-
> > spear1340-miphy.c
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists