| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1400799936-26499-3-git-send-email-keescook@chromium.org>
Date: Thu, 22 May 2014 16:05:32 -0700
From: Kees Cook <keescook@...omium.org>
To: linux-kernel@...r.kernel.org
Cc: Kees Cook <keescook@...omium.org>,
Andy Lutomirski <luto@...capital.net>,
Oleg Nesterov <oleg@...hat.com>,
Alexander Viro <viro@...iv.linux.org.uk>,
Peter Zijlstra <peterz@...radead.org>,
James Morris <james.l.morris@...cle.com>,
Eric Paris <eparis@...hat.com>,
Juri Lelli <juri.lelli@...il.com>,
John Stultz <john.stultz@...aro.org>,
"David S. Miller" <davem@...emloft.net>,
Daniel Borkmann <dborkman@...hat.com>,
Alex Thorlton <athorlton@....com>,
Rik van Riel <riel@...hat.com>,
Daeseok Youn <daeseok.youn@...il.com>,
David Rientjes <rientjes@...gle.com>,
"Eric W. Biederman" <ebiederm@...ssion.com>,
Dario Faggioli <raistlin@...ux.it>,
Rashika Kheria <rashika.kheria@...il.com>,
liguang <lig.fnst@...fujitsu.com>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
linux-doc@...r.kernel.org, linux-security-module@...r.kernel.org
Subject: [PATCH v5 2/6] seccomp: split filter prep from check and apply
In preparation for adding seccomp locking, move filter creation away
from where it is checked and applied. This will allow for locking where
no memory allocation is happening. The validation, filter attachment,
and seccomp mode setting can all happen under the future locks.
Signed-off-by: Kees Cook <keescook@...omium.org>
---
kernel/seccomp.c | 86 ++++++++++++++++++++++++++++++++++++------------------
1 file changed, 58 insertions(+), 28 deletions(-)
diff --git a/kernel/seccomp.c b/kernel/seccomp.c
index 8bbe20111222..481504100b1d 100644
--- a/kernel/seccomp.c
+++ b/kernel/seccomp.c
@@ -18,6 +18,7 @@
#include <linux/compat.h>
#include <linux/sched.h>
#include <linux/seccomp.h>
+#include <linux/slab.h>
/* #define SECCOMP_DEBUG 1 */
@@ -26,7 +27,6 @@
#include <linux/filter.h>
#include <linux/ptrace.h>
#include <linux/security.h>
-#include <linux/slab.h>
#include <linux/tracehook.h>
#include <linux/uaccess.h>
@@ -197,27 +197,21 @@ static u32 seccomp_run_filters(int syscall)
}
/**
- * seccomp_attach_filter: Attaches a seccomp filter to current.
+ * seccomp_prepare_filter: Prepares a seccomp filter for use.
* @fprog: BPF program to install
*
- * Returns 0 on success or an errno on failure.
+ * Returns filter on success or an ERR_PTR on failure.
*/
-static long seccomp_attach_filter(struct sock_fprog *fprog)
+static struct seccomp_filter *seccomp_prepare_filter(struct sock_fprog *fprog)
{
struct seccomp_filter *filter;
unsigned long fp_size = fprog->len * sizeof(struct sock_filter);
- unsigned long total_insns = fprog->len;
struct sock_filter *fp;
int new_len;
long ret;
if (fprog->len == 0 || fprog->len > BPF_MAXINSNS)
- return -EINVAL;
-
- for (filter = current->seccomp.filter; filter; filter = filter->prev)
- total_insns += filter->len + 4; /* include a 4 instr penalty */
- if (total_insns > MAX_INSNS_PER_PATH)
- return -ENOMEM;
+ return ERR_PTR(-EINVAL);
/*
* Installing a seccomp filter requires that the task have
@@ -228,11 +222,11 @@ static long seccomp_attach_filter(struct sock_fprog *fprog)
if (!current->no_new_privs &&
security_capable_noaudit(current_cred(), current_user_ns(),
CAP_SYS_ADMIN) != 0)
- return -EACCES;
+ return ERR_PTR(-EACCES);
fp = kzalloc(fp_size, GFP_KERNEL|__GFP_NOWARN);
if (!fp)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
/* Copy the instructions from fprog. */
ret = -EFAULT;
@@ -270,31 +264,26 @@ static long seccomp_attach_filter(struct sock_fprog *fprog)
atomic_set(&filter->usage, 1);
filter->len = new_len;
- /*
- * If there is an existing filter, make it the prev and don't drop its
- * task reference.
- */
- filter->prev = current->seccomp.filter;
- current->seccomp.filter = filter;
- return 0;
+ return filter;
free_filter:
kfree(filter);
free_prog:
kfree(fp);
- return ret;
+ return ERR_PTR(ret);
}
/**
- * seccomp_attach_user_filter - attaches a user-supplied sock_fprog
+ * seccomp_prepare_user_filter - prepares a user-supplied sock_fprog
* @user_filter: pointer to the user data containing a sock_fprog.
*
- * Returns 0 on success and non-zero otherwise.
+ * Returns filter on success and ERR_PTR otherwise.
*/
-static long seccomp_attach_user_filter(char __user *user_filter)
+static
+struct seccomp_filter *seccomp_prepare_user_filter(char __user *user_filter)
{
struct sock_fprog fprog;
- long ret = -EFAULT;
+ struct seccomp_filter *filter = ERR_PTR(-EFAULT);
#ifdef CONFIG_COMPAT
if (is_compat_task()) {
@@ -307,9 +296,37 @@ static long seccomp_attach_user_filter(char __user *user_filter)
#endif
if (copy_from_user(&fprog, user_filter, sizeof(fprog)))
goto out;
- ret = seccomp_attach_filter(&fprog);
+ filter = seccomp_prepare_filter(&fprog);
out:
- return ret;
+ return filter;
+}
+
+/**
+ * _seccomp_attach_filter: validated and attach filter
+ * @filter: seccomp filter to add to the current process
+ *
+ * Returns 0 on success, -ve on error.
+ */
+static long _seccomp_attach_filter(struct seccomp_filter *filter)
+{
+ unsigned long total_insns;
+ struct seccomp_filter *walker;
+
+ /* Validate resulting filter length. */
+ total_insns = filter->len;
+ for (walker = current->seccomp.filter; walker; walker = filter->prev)
+ total_insns += walker->len + 4; /* include a 4 instr penalty */
+ if (total_insns > MAX_INSNS_PER_PATH)
+ return -ENOMEM;
+
+ /*
+ * If there is an existing filter, make it the prev and don't drop its
+ * task reference.
+ */
+ filter->prev = current->seccomp.filter;
+ current->seccomp.filter = filter;
+
+ return 0;
}
/* get_seccomp_filter - increments the reference count of the filter on @tsk */
@@ -480,8 +497,18 @@ long prctl_get_seccomp(void)
*/
static long seccomp_set_mode(unsigned long seccomp_mode, char __user *filter)
{
+ struct seccomp_filter *prepared = NULL;
long ret = -EINVAL;
+#ifdef CONFIG_SECCOMP_FILTER
+ /* Prepare the new filter outside of the seccomp lock. */
+ if (seccomp_mode == SECCOMP_MODE_FILTER) {
+ prepared = seccomp_prepare_user_filter(filter);
+ if (IS_ERR(prepared))
+ return PTR_ERR(prepared);
+ }
+#endif
+
if (current->seccomp.mode &&
current->seccomp.mode != seccomp_mode)
goto out;
@@ -495,9 +522,11 @@ static long seccomp_set_mode(unsigned long seccomp_mode, char __user *filter)
break;
#ifdef CONFIG_SECCOMP_FILTER
case SECCOMP_MODE_FILTER:
- ret = seccomp_attach_user_filter(filter);
+ ret = _seccomp_attach_filter(prepared);
if (ret)
goto out;
+ /* Do not free the successfully attached filter. */
+ prepared = NULL;
break;
#endif
default:
@@ -507,6 +536,7 @@ static long seccomp_set_mode(unsigned long seccomp_mode, char __user *filter)
current->seccomp.mode = seccomp_mode;
set_thread_flag(TIF_SECCOMP);
out:
+ kfree(prepared);
return ret;
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists