[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1400841111-6683-43-git-send-email-daniel.lezcano@linaro.org>
Date: Fri, 23 May 2014 12:31:23 +0200
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: tglx@...utronix.de, mingo@...nel.org
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH 43/71] clocksource: sh_mtu2: Add index to struct sh_mtu2_channel
From: Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
Use the index as the timer start/stop bit and when printing messages to
identify the channel.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
Tested-by: Wolfram Sang <wsa@...g-engineering.com>
---
drivers/clocksource/sh_mtu2.c | 22 +++++++++++++---------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/drivers/clocksource/sh_mtu2.c b/drivers/clocksource/sh_mtu2.c
index 97714ce..61827c6 100644
--- a/drivers/clocksource/sh_mtu2.c
+++ b/drivers/clocksource/sh_mtu2.c
@@ -38,6 +38,7 @@ struct sh_mtu2_device;
struct sh_mtu2_channel {
struct sh_mtu2_device *mtu;
+ unsigned int index;
void __iomem *base;
int irq;
@@ -110,7 +111,6 @@ static inline void sh_mtu2_write(struct sh_mtu2_channel *ch, int reg_nr,
static void sh_mtu2_start_stop_ch(struct sh_mtu2_channel *ch, int start)
{
- struct sh_timer_config *cfg = ch->mtu->pdev->dev.platform_data;
unsigned long flags, value;
/* start stop register shared by multiple timer channels */
@@ -118,9 +118,9 @@ static void sh_mtu2_start_stop_ch(struct sh_mtu2_channel *ch, int start)
value = sh_mtu2_read(ch, TSTR);
if (start)
- value |= 1 << cfg->timer_bit;
+ value |= 1 << ch->index;
else
- value &= ~(1 << cfg->timer_bit);
+ value &= ~(1 << ch->index);
sh_mtu2_write(ch, TSTR, value);
raw_spin_unlock_irqrestore(&sh_mtu2_lock, flags);
@@ -138,7 +138,8 @@ static int sh_mtu2_enable(struct sh_mtu2_channel *ch)
/* enable clock */
ret = clk_enable(ch->mtu->clk);
if (ret) {
- dev_err(&ch->mtu->pdev->dev, "cannot enable clock\n");
+ dev_err(&ch->mtu->pdev->dev, "ch%u: cannot enable clock\n",
+ ch->index);
return ret;
}
@@ -211,7 +212,7 @@ static void sh_mtu2_clock_event_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
dev_info(&ch->mtu->pdev->dev,
- "used for periodic clock events\n");
+ "ch%u: used for periodic clock events\n", ch->index);
sh_mtu2_enable(ch);
break;
case CLOCK_EVT_MODE_UNUSED:
@@ -250,15 +251,16 @@ static void sh_mtu2_register_clockevent(struct sh_mtu2_channel *ch,
ced->suspend = sh_mtu2_clock_event_suspend;
ced->resume = sh_mtu2_clock_event_resume;
- dev_info(&ch->mtu->pdev->dev, "used for clock events\n");
+ dev_info(&ch->mtu->pdev->dev, "ch%u: used for clock events\n",
+ ch->index);
clockevents_register_device(ced);
ret = request_irq(ch->irq, sh_mtu2_interrupt,
IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
dev_name(&ch->mtu->pdev->dev), ch);
if (ret) {
- dev_err(&ch->mtu->pdev->dev, "failed to request irq %d\n",
- ch->irq);
+ dev_err(&ch->mtu->pdev->dev, "ch%u: failed to request irq %d\n",
+ ch->index, ch->irq);
return;
}
}
@@ -279,10 +281,12 @@ static int sh_mtu2_setup_channel(struct sh_mtu2_channel *ch,
memset(ch, 0, sizeof(*ch));
ch->mtu = mtu;
+ ch->index = cfg->timer_bit;
ch->irq = platform_get_irq(mtu->pdev, 0);
if (ch->irq < 0) {
- dev_err(&mtu->pdev->dev, "failed to get irq\n");
+ dev_err(&mtu->pdev->dev, "ch%u: failed to get irq\n",
+ ch->index);
return ch->irq;
}
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists