[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20140525191128.GW10768@lukather>
Date: Sun, 25 May 2014 21:11:28 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Chen-Yu Tsai <wens@...e.org>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Samuel Ortiz <sameo@...ux.intel.com>,
Lee Jones <lee.jones@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mike Turquette <mturquette@...aro.org>,
Emilio Lopez <emilio@...pez.com.ar>,
Linus Walleij <linus.walleij@...aro.org>,
linux-serial@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Hans de Goede <hdegoede@...hat.com>,
Boris BREZILLON <boris.brezillon@...e-electrons.com>,
Luc Verhaegen <libv@...net.be>
Subject: Re: [PATCH 16/22] pinctrl: sunxi: Add A23 R_PIO controller support
On Fri, May 23, 2014 at 03:51:19PM +0800, Chen-Yu Tsai wrote:
> The A23 has a R_PIO pin controller, similar to the one found on the A31 SoC.
> Add support for the pins controlled by the R_PIO controller.
>
> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
> ---
> drivers/pinctrl/sunxi/Kconfig | 4 +
> drivers/pinctrl/sunxi/Makefile | 1 +
> drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c | 129 ++++++++++++++++++++++++++++
> 3 files changed, 134 insertions(+)
> create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
>
> diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
> index 17a4281..3058d32 100644
> --- a/drivers/pinctrl/sunxi/Kconfig
> +++ b/drivers/pinctrl/sunxi/Kconfig
> @@ -36,4 +36,8 @@ config PINCTRL_SUN8I_A23
> def_bool PINCTRL_SUNXI || MACH_SUN8I
> select PINCTRL_SUNXI_COMMON
>
> +config PINCTRL_SUN8I_A23_R
> + def_bool PINCTRL_SUNXI || MACH_SUN8I
Like said in the previous patch, you can just depend on MACH_SUN8I
here.
> + select PINCTRL_SUNXI_COMMON
> +
> endif
> diff --git a/drivers/pinctrl/sunxi/Makefile b/drivers/pinctrl/sunxi/Makefile
> index 850cd50..e797efb 100644
> --- a/drivers/pinctrl/sunxi/Makefile
> +++ b/drivers/pinctrl/sunxi/Makefile
> @@ -9,3 +9,4 @@ obj-$(CONFIG_PINCTRL_SUN6I_A31) += pinctrl-sun6i-a31.o
> obj-$(CONFIG_PINCTRL_SUN6I_A31_R) += pinctrl-sun6i-a31-r.o
> obj-$(CONFIG_PINCTRL_SUN7I_A20) += pinctrl-sun7i-a20.o
> obj-$(CONFIG_PINCTRL_SUN8I_A23) += pinctrl-sun8i-a23.o
> +obj-$(CONFIG_PINCTRL_SUN8I_A23_R) += pinctrl-sun8i-a23-r.o
> diff --git a/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c b/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
> new file mode 100644
> index 0000000..ae17888
> --- /dev/null
> +++ b/drivers/pinctrl/sunxi/pinctrl-sun8i-a23-r.c
> @@ -0,0 +1,129 @@
> +/*
> + * Allwinner A23 SoCs special pins pinctrl driver.
> + *
> + * Copyright (C) 2014 Chen-Yu Tsai
> + * Chen-Yu Tsai <wens@...e.org>
> + *
> + * Copyright (C) 2014 Boris Brezillon
> + * Boris Brezillon <boris.brezillon@...e-electrons.com>
> + *
> + * Copyright (C) 2014 Maxime Ripard
> + * Maxime Ripard <maxime.ripard@...e-electrons.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/reset.h>
> +
> +#include "pinctrl-sunxi.h"
> +
> +static const struct sunxi_desc_pin sun8i_a23_r_pins[] = {
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 0),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_rsb"), /* SCK */
> + SUNXI_FUNCTION(0x3, "s_twi")), /* SCK */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 1),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_rsb"), /* SDA */
> + SUNXI_FUNCTION(0x3, "s_twi")), /* SDA */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 2),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_uart")), /* TX */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 3),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_uart")), /* RX */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 4),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x3, "s_jtag")), /* MS */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 5),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x3, "s_jtag")), /* CK */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 6),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x3, "s_jtag")), /* DO */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 7),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x3, "s_jtag")), /* DI */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 8),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_twi")), /* SCK */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 9),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_twi")), /* SDA */
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 10),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out"),
> + SUNXI_FUNCTION(0x2, "s_pwm")),
> + SUNXI_PIN(SUNXI_PINCTRL_PIN(L, 11),
> + SUNXI_FUNCTION(0x0, "gpio_in"),
> + SUNXI_FUNCTION(0x1, "gpio_out")),
> +};
> +
> +static const struct sunxi_pinctrl_desc sun8i_a23_r_pinctrl_data = {
> + .pins = sun8i_a23_r_pins,
> + .npins = ARRAY_SIZE(sun8i_a23_r_pins),
> + .pin_base = PL_BASE,
> +};
> +
> +static int sun8i_a23_r_pinctrl_probe(struct platform_device *pdev)
> +{
> + struct reset_control *rstc;
> + int ret;
> +
> + rstc = devm_reset_control_get(&pdev->dev, NULL);
Oh, and since you're using the reset framework, you should depends on
RESET_CONTROLLER.
> + if (IS_ERR(rstc)) {
> + dev_err(&pdev->dev, "Reset controller missing\n");
> + return PTR_ERR(rstc);
> + }
> +
> + ret = reset_control_deassert(rstc);
> + if (ret)
> + return ret;
> +
> + ret = sunxi_pinctrl_init(pdev,
> + &sun8i_a23_r_pinctrl_data);
> +
> + if (ret)
> + reset_control_assert(rstc);
> +
> + return ret;
> +}
> +
> +static struct of_device_id sun8i_a23_r_pinctrl_match[] = {
> + { .compatible = "allwinner,sun8i-a23-r-pinctrl", },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, sun8i_a23_r_pinctrl_match);
> +
> +static struct platform_driver sun8i_a23_r_pinctrl_driver = {
> + .probe = sun8i_a23_r_pinctrl_probe,
> + .driver = {
> + .name = "sun8i-a23-r-pinctrl",
> + .owner = THIS_MODULE,
> + .of_match_table = sun8i_a23_r_pinctrl_match,
> + },
> +};
> +module_platform_driver(sun8i_a23_r_pinctrl_driver);
> +
> +MODULE_AUTHOR("Chen-Yu Tsai <wens@...e.org>");
> +MODULE_AUTHOR("Boris Brezillon <boris.brezillon@...e-electrons.com");
> +MODULE_AUTHOR("Maxime Ripard <maxime.ripard@...e-electrons.com");
> +MODULE_DESCRIPTION("Allwinner A23 R_PIO pinctrl driver");
> +MODULE_LICENSE("GPL");
Looks good otherwise, once these minor things are fixed, you have my
acked-by.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)
Powered by blists - more mailing lists