| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1401117492-2870-12-git-send-email-andreas.noever@gmail.com>
Date: Mon, 26 May 2014 17:18:08 +0200
From: Andreas Noever <andreas.noever@...il.com>
To: linux-kernel@...r.kernel.org,
Matthew Garrett <matthew.garrett@...ula.com>,
Greg KH <greg@...ah.com>, Bjorn Helgaas <bhelgaas@...gle.com>,
linux-pci@...r.kernel.org
Cc: Andreas Noever <andreas.noever@...il.com>
Subject: [PATCH v3 11/15] thunderbolt: Add support for simple pci tunnels.
A pci downstream and pci upstream port can be connected through a
tunnel. To establish the tunnel we have to setup two unidirectional
paths between the two ports.
Right now we only support paths with two hops (i.e. no chaining) and at
most one pci device per thunderbolt device.
Signed-off-by: Andreas Noever <andreas.noever@...il.com>
---
drivers/thunderbolt/Makefile | 2 +-
drivers/thunderbolt/tb.c | 135 +++++++++++++++++++++++
drivers/thunderbolt/tb.h | 1 +
drivers/thunderbolt/tunnel_pci.c | 232 +++++++++++++++++++++++++++++++++++++++
drivers/thunderbolt/tunnel_pci.h | 30 +++++
5 files changed, 399 insertions(+), 1 deletion(-)
create mode 100644 drivers/thunderbolt/tunnel_pci.c
create mode 100644 drivers/thunderbolt/tunnel_pci.h
diff --git a/drivers/thunderbolt/Makefile b/drivers/thunderbolt/Makefile
index 3532f36..0122ca6 100644
--- a/drivers/thunderbolt/Makefile
+++ b/drivers/thunderbolt/Makefile
@@ -1,3 +1,3 @@
obj-${CONFIG_THUNDERBOLT} := thunderbolt.o
-thunderbolt-objs := nhi.o ctl.o tb.o switch.o cap.o path.o
+thunderbolt-objs := nhi.o ctl.o tb.o switch.o cap.o path.o tunnel_pci.o
diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c
index 1efcacc..177f61d 100644
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@@ -10,6 +10,7 @@
#include "tb.h"
#include "tb_regs.h"
+#include "tunnel_pci.h"
/* enumeration & hot plug handling */
@@ -51,6 +52,124 @@ static void tb_scan_port(struct tb_port *port)
tb_scan_switch(sw);
}
+/**
+ * tb_free_invalid_tunnels() - destroy tunnels of devices that have gone away
+ */
+static void tb_free_invalid_tunnels(struct tb *tb)
+{
+ struct tb_pci_tunnel *tunnel;
+ struct tb_pci_tunnel *n;
+ list_for_each_entry_safe(tunnel, n, &tb->tunnel_list, list)
+ {
+ if (tb_pci_is_invalid(tunnel)) {
+ tb_pci_deactivate(tunnel);
+ tb_pci_free(tunnel);
+ }
+ }
+}
+
+/**
+ * find_pci_up_port() - return the first PCIe up port on @sw or NULL
+ */
+static struct tb_port *tb_find_pci_up_port(struct tb_switch *sw)
+{
+ int i;
+ for (i = 1; i <= sw->config.max_port_number; i++)
+ if (sw->ports[i].config.type == TB_TYPE_PCIE_UP)
+ return &sw->ports[i];
+ return NULL;
+}
+
+/**
+ * find_unused_down_port() - return the first inactive PCIe down port on @sw
+ */
+static struct tb_port *tb_find_unused_down_port(struct tb_switch *sw)
+{
+ int i;
+ int cap;
+ int res;
+ int data;
+ for (i = 1; i <= sw->config.max_port_number; i++) {
+ if (tb_is_upstream_port(&sw->ports[i]))
+ continue;
+ if (sw->ports[i].config.type != TB_TYPE_PCIE_DOWN)
+ continue;
+ cap = tb_find_cap(&sw->ports[i], TB_CFG_PORT, TB_CAP_PCIE);
+ if (cap <= 0)
+ continue;
+ res = tb_port_read(&sw->ports[i], &data, TB_CFG_PORT, cap, 1);
+ if (res < 0)
+ continue;
+ if (data & 0x80000000)
+ continue;
+ return &sw->ports[i];
+ }
+ return NULL;
+}
+
+/**
+ * tb_activate_pcie_devices() - scan for and activate PCIe devices
+ *
+ * This method is somewhat ad hoc. For now it only supports one device
+ * per port and only devices at depth 1.
+ */
+static void tb_activate_pcie_devices(struct tb *tb)
+{
+ int i;
+ int cap;
+ u32 data;
+ struct tb_switch *sw;
+ struct tb_port *up_port;
+ struct tb_port *down_port;
+ struct tb_pci_tunnel *tunnel;
+ /* scan for pcie devices at depth 1*/
+ for (i = 1; i <= tb->root_switch->config.max_port_number; i++) {
+ if (tb_is_upstream_port(&tb->root_switch->ports[i]))
+ continue;
+ if (tb->root_switch->ports[i].config.type != TB_TYPE_PORT)
+ continue;
+ if (!tb->root_switch->ports[i].remote)
+ continue;
+ sw = tb->root_switch->ports[i].remote->sw;
+ up_port = tb_find_pci_up_port(sw);
+ if (!up_port) {
+ tb_sw_info(sw, "no PCIe devices found, aborting\n");
+ continue;
+ }
+
+ /* check whether port is already activated */
+ cap = tb_find_cap(up_port, TB_CFG_PORT, TB_CAP_PCIE);
+ if (cap <= 0)
+ continue;
+ if (tb_port_read(up_port, &data, TB_CFG_PORT, cap, 1))
+ continue;
+ if (data & 0x80000000) {
+ tb_port_info(up_port,
+ "PCIe port already activated, aborting\n");
+ continue;
+ }
+
+ down_port = tb_find_unused_down_port(tb->root_switch);
+ if (!down_port) {
+ tb_port_info(up_port,
+ "All PCIe down ports are occupied, aborting\n");
+ continue;
+ }
+ tunnel = tb_pci_alloc(tb, up_port, down_port);
+ if (!tunnel) {
+ tb_port_info(up_port,
+ "PCIe tunnel allocation failed, aborting\n");
+ continue;
+ }
+
+ if (tb_pci_activate(tunnel)) {
+ tb_port_info(up_port,
+ "PCIe tunnel activation failed, aborting\n");
+ tb_pci_free(tunnel);
+ }
+
+ }
+}
/* hotplug handling */
@@ -101,6 +220,7 @@ static void tb_handle_hotplug(struct work_struct *work)
if (port->remote) {
tb_port_info(port, "unplugged\n");
tb_sw_set_unpplugged(port->remote->sw);
+ tb_free_invalid_tunnels(tb);
tb_switch_free(port->remote->sw);
port->remote = NULL;
} else {
@@ -118,6 +238,10 @@ static void tb_handle_hotplug(struct work_struct *work)
} else if (port->remote->sw->config.depth > 1) {
tb_sw_warn(port->remote->sw,
"hotplug: chaining not supported\n");
+ } else {
+ tb_sw_info(port->remote->sw,
+ "hotplug: activating pcie devices\n");
+ tb_activate_pcie_devices(tb);
}
}
out:
@@ -154,8 +278,17 @@ static void tb_schedule_hotplug_handler(void *data, u64 route, u8 port,
*/
void thunderbolt_shutdown_and_free(struct tb *tb)
{
+ struct tb_pci_tunnel *tunnel;
+ struct tb_pci_tunnel *n;
+
mutex_lock(&tb->lock);
+ /* tunnels are only present after everything has been initialized */
+ list_for_each_entry_safe(tunnel, n, &tb->tunnel_list, list) {
+ tb_pci_deactivate(tunnel);
+ tb_pci_free(tunnel);
+ }
+
if (tb->root_switch)
tb_switch_free(tb->root_switch);
tb->root_switch = NULL;
@@ -201,6 +334,7 @@ struct tb *thunderbolt_alloc_and_start(struct tb_nhi *nhi)
tb->nhi = nhi;
mutex_init(&tb->lock);
mutex_lock(&tb->lock);
+ INIT_LIST_HEAD(&tb->tunnel_list);
tb->wq = alloc_ordered_workqueue("thunderbolt", 0);
if (!tb->wq)
@@ -221,6 +355,7 @@ struct tb *thunderbolt_alloc_and_start(struct tb_nhi *nhi)
/* Full scan to discover devices added before the driver was loaded. */
tb_scan_switch(tb->root_switch);
+ tb_activate_pcie_devices(tb);
/* Allow tb_handle_hotplug to progress events */
tb->hotplug_active = true;
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index 8bbdc2b..508abc4 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -100,6 +100,7 @@ struct tb {
struct tb_ctl *ctl;
struct workqueue_struct *wq; /* ordered workqueue for plug events */
struct tb_switch *root_switch;
+ struct list_head tunnel_list; /* list of active PCIe tunnels */
bool hotplug_active; /*
* tb_handle_hotplug will stop progressing plug
* events and exit if this is not set (it needs to
diff --git a/drivers/thunderbolt/tunnel_pci.c b/drivers/thunderbolt/tunnel_pci.c
new file mode 100644
index 0000000..baf1cd3
--- /dev/null
+++ b/drivers/thunderbolt/tunnel_pci.c
@@ -0,0 +1,232 @@
+/*
+ * Thunderbolt Cactus Ridge driver - PCIe tunnel
+ *
+ * Copyright (c) 2014 Andreas Noever <andreas.noever@...il.com>
+ */
+
+#include <linux/slab.h>
+#include <linux/list.h>
+
+#include "tunnel_pci.h"
+#include "tb.h"
+
+#define __TB_TUNNEL_PRINT(level, tunnel, fmt, arg...) \
+ do { \
+ struct tb_pci_tunnel *__tunnel = (tunnel); \
+ level(__tunnel->tb, "%llx:%x <-> %llx:%x (PCI): " fmt, \
+ tb_route(__tunnel->down_port->sw), \
+ __tunnel->down_port->port, \
+ tb_route(__tunnel->up_port->sw), \
+ __tunnel->up_port->port, \
+ ## arg); \
+ } while (0)
+
+#define tb_tunnel_WARN(tunnel, fmt, arg...) \
+ __TB_TUNNEL_PRINT(tb_WARN, tunnel, fmt, ##arg)
+#define tb_tunnel_warn(tunnel, fmt, arg...) \
+ __TB_TUNNEL_PRINT(tb_warn, tunnel, fmt, ##arg)
+#define tb_tunnel_info(tunnel, fmt, arg...) \
+ __TB_TUNNEL_PRINT(tb_info, tunnel, fmt, ##arg)
+
+static void tb_pci_init_path(struct tb_path *path)
+{
+ path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL;
+ path->egress_shared_buffer = TB_PATH_NONE;
+ path->ingress_fc_enable = TB_PATH_ALL;
+ path->ingress_shared_buffer = TB_PATH_NONE;
+ path->priority = 3;
+ path->weight = 1;
+ path->drop_packages = 0;
+ path->nfc_credits = 0;
+}
+
+/**
+ * tb_pci_alloc() - allocate a pci tunnel
+ *
+ * Allocate a PCI tunnel. The ports must be of type TB_TYPE_PCIE_UP and
+ * TB_TYPE_PCIE_DOWN.
+ *
+ * Currently only paths consisting of two hops are supported (that is the
+ * ports must be on "adjacent" switches).
+ *
+ * The paths are hard-coded to use hop 8 (the only working hop id available on
+ * my thunderbolt devices). Therefore at most ONE path per device may be
+ * activated.
+ *
+ * Return: Returns a tb_pci_tunnel on success or NULL on failure.
+ */
+struct tb_pci_tunnel *tb_pci_alloc(struct tb *tb, struct tb_port *up,
+ struct tb_port *down)
+{
+ struct tb_pci_tunnel *tunnel = kzalloc(sizeof(*tunnel), GFP_KERNEL);
+ if (!tunnel)
+ goto err;
+ tunnel->tb = tb;
+ tunnel->down_port = down;
+ tunnel->up_port = up;
+ INIT_LIST_HEAD(&tunnel->list);
+ tunnel->path_to_up = tb_path_alloc(up->sw->tb, 2);
+ if (!tunnel->path_to_up)
+ goto err;
+ tunnel->path_to_down = tb_path_alloc(up->sw->tb, 2);
+ if (!tunnel->path_to_down)
+ goto err;
+ tb_pci_init_path(tunnel->path_to_up);
+ tb_pci_init_path(tunnel->path_to_down);
+
+ tunnel->path_to_up->hops[0].in_port = down;
+ tunnel->path_to_up->hops[0].in_hop_index = 8;
+ tunnel->path_to_up->hops[0].in_counter_index = -1;
+ tunnel->path_to_up->hops[0].out_port = tb_upstream_port(up->sw)->remote;
+ tunnel->path_to_up->hops[0].next_hop_index = 8;
+
+ tunnel->path_to_up->hops[1].in_port = tb_upstream_port(up->sw);
+ tunnel->path_to_up->hops[1].in_hop_index = 8;
+ tunnel->path_to_up->hops[1].in_counter_index = -1;
+ tunnel->path_to_up->hops[1].out_port = up;
+ tunnel->path_to_up->hops[1].next_hop_index = 8;
+
+ tunnel->path_to_down->hops[0].in_port = up;
+ tunnel->path_to_down->hops[0].in_hop_index = 8;
+ tunnel->path_to_down->hops[0].in_counter_index = -1;
+ tunnel->path_to_down->hops[0].out_port = tb_upstream_port(up->sw);
+ tunnel->path_to_down->hops[0].next_hop_index = 8;
+
+ tunnel->path_to_down->hops[1].in_port =
+ tb_upstream_port(up->sw)->remote;
+ tunnel->path_to_down->hops[1].in_hop_index = 8;
+ tunnel->path_to_down->hops[1].in_counter_index = -1;
+ tunnel->path_to_down->hops[1].out_port = down;
+ tunnel->path_to_down->hops[1].next_hop_index = 8;
+ return tunnel;
+
+err:
+ if (tunnel) {
+ if (tunnel->path_to_down)
+ tb_path_free(tunnel->path_to_down);
+ if (tunnel->path_to_up)
+ tb_path_free(tunnel->path_to_up);
+ kfree(tunnel);
+ }
+ return NULL;
+}
+
+/**
+ * tb_pci_free() - free a tunnel
+ *
+ * The tunnel must have been deactivated.
+ */
+void tb_pci_free(struct tb_pci_tunnel *tunnel)
+{
+ if (tunnel->path_to_up->activated || tunnel->path_to_down->activated) {
+ tb_tunnel_WARN(tunnel, "trying to free an activated tunnel\n");
+ return;
+ }
+ tb_path_free(tunnel->path_to_up);
+ tb_path_free(tunnel->path_to_down);
+ kfree(tunnel);
+}
+
+/**
+ * tb_pci_is_invalid - check whether an activated path is still valid
+ */
+bool tb_pci_is_invalid(struct tb_pci_tunnel *tunnel)
+{
+ WARN_ON(!tunnel->path_to_up->activated);
+ WARN_ON(!tunnel->path_to_down->activated);
+
+ return tb_path_is_invalid(tunnel->path_to_up)
+ || tb_path_is_invalid(tunnel->path_to_down);
+}
+
+/**
+ * tb_pci_port_active() - activate/deactivate PCI capability
+ *
+ * Return: Returns 0 on success or an error code on failure.
+ */
+static int tb_pci_port_active(struct tb_port *port, bool active)
+{
+ u32 word = active ? 0x80000000 : 0x0;
+ int cap = tb_find_cap(port, TB_CFG_PORT, TB_CAP_PCIE);
+ if (cap <= 0) {
+ tb_port_warn(port, "TB_CAP_PCIE not found: %d\n", cap);
+ return cap ? cap : -ENXIO;
+ }
+ return tb_port_write(port, &word, TB_CFG_PORT, cap, 1);
+}
+
+/**
+ * tb_pci_restart() - activate a tunnel after a hardware reset
+ */
+int tb_pci_restart(struct tb_pci_tunnel *tunnel)
+{
+ int res;
+ tunnel->path_to_up->activated = false;
+ tunnel->path_to_down->activated = false;
+
+ tb_tunnel_info(tunnel, "activating\n");
+
+ res = tb_path_activate(tunnel->path_to_up);
+ if (res)
+ goto err;
+ res = tb_path_activate(tunnel->path_to_down);
+ if (res)
+ goto err;
+
+ res = tb_pci_port_active(tunnel->down_port, true);
+ if (res)
+ goto err;
+
+ res = tb_pci_port_active(tunnel->up_port, true);
+ if (res)
+ goto err;
+ return 0;
+err:
+ tb_tunnel_warn(tunnel, "activation failed\n");
+ tb_pci_deactivate(tunnel);
+ return res;
+}
+
+/**
+ * tb_pci_activate() - activate a tunnel
+ *
+ * Return: Returns 0 on success or an error code on failure.
+ */
+int tb_pci_activate(struct tb_pci_tunnel *tunnel)
+{
+ int res;
+ if (tunnel->path_to_up->activated || tunnel->path_to_down->activated) {
+ tb_tunnel_WARN(tunnel,
+ "trying to activate an already activated tunnel\n");
+ return -EINVAL;
+ }
+
+ res = tb_pci_restart(tunnel);
+ if (res)
+ return res;
+
+ list_add(&tunnel->list, &tunnel->tb->tunnel_list);
+ return 0;
+}
+
+
+
+/**
+ * tb_pci_deactivate() - deactivate a tunnel
+ */
+void tb_pci_deactivate(struct tb_pci_tunnel *tunnel)
+{
+ tb_tunnel_info(tunnel, "deactivating\n");
+ /*
+ * TODO: enable reset by writing 0x04000000 to TB_CAP_PCIE + 1 on up
+ * port. Seems to have no effect?
+ */
+ tb_pci_port_active(tunnel->up_port, false);
+ tb_pci_port_active(tunnel->down_port, false);
+ if (tunnel->path_to_down->activated)
+ tb_path_deactivate(tunnel->path_to_down);
+ if (tunnel->path_to_up->activated)
+ tb_path_deactivate(tunnel->path_to_up);
+ list_del_init(&tunnel->list);
+}
+
diff --git a/drivers/thunderbolt/tunnel_pci.h b/drivers/thunderbolt/tunnel_pci.h
new file mode 100644
index 0000000..a67f93c
--- /dev/null
+++ b/drivers/thunderbolt/tunnel_pci.h
@@ -0,0 +1,30 @@
+/*
+ * Thunderbolt Cactus Ridge driver - PCIe tunnel
+ *
+ * Copyright (c) 2014 Andreas Noever <andreas.noever@...il.com>
+ */
+
+#ifndef TB_PCI_H_
+#define TB_PCI_H_
+
+#include "tb.h"
+
+struct tb_pci_tunnel {
+ struct tb *tb;
+ struct tb_port *up_port;
+ struct tb_port *down_port;
+ struct tb_path *path_to_up;
+ struct tb_path *path_to_down;
+ struct list_head list;
+};
+
+struct tb_pci_tunnel *tb_pci_alloc(struct tb *tb, struct tb_port *up,
+ struct tb_port *down);
+void tb_pci_free(struct tb_pci_tunnel *tunnel);
+int tb_pci_activate(struct tb_pci_tunnel *tunnel);
+int tb_pci_restart(struct tb_pci_tunnel *tunnel);
+void tb_pci_deactivate(struct tb_pci_tunnel *tunnel);
+bool tb_pci_is_invalid(struct tb_pci_tunnel *tunnel);
+
+#endif
+
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists