| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1401178092-1228-29-git-send-email-jiang.liu@linux.intel.com>
Date: Tue, 27 May 2014 16:08:03 +0800
From: Jiang Liu <jiang.liu@...ux.intel.com>
To: Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Thomas Gleixner <tglx@...utronix.de>,
Grant Likely <grant.likely@...aro.org>,
Ingo Molnar <mingo@...hat.com>,
"H. Peter Anvin" <hpa@...or.com>,
"Rafael J. Wysocki" <rjw@...ysocki.net>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Randy Dunlap <rdunlap@...radead.org>,
Yinghai Lu <yinghai@...nel.org>, x86@...nel.org,
Len Brown <lenb@...nel.org>,
David Cohen <david.a.cohen@...ux.intel.com>,
Kuppuswamy Sathyanarayanan
<sathyanarayanan.kuppuswamy@...ux.intel.com>,
Jiang Liu <jiang.liu@...ux.intel.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@...cle.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Tony Luck <tony.luck@...el.com>,
Joerg Roedel <joro@...tes.org>,
Paul Gortmaker <paul.gortmaker@...driver.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
linux-acpi@...r.kernel.org, "H. Peter Anvin" <hpa@...ux.intel.com>,
sfi-devel@...plefirmware.org
Subject: [Patch V3 28/37] x86, irq, SFI: use common irqdomain map interface to program IOAPIC pins
Refine SFI to use common irqdomain map interface to program IOAPIC pins,
so we can unify the callsite to progam IOAPIC pins.
Signed-off-by: Jiang Liu <jiang.liu@...ux.intel.com>
---
arch/x86/pci/intel_mid_pci.c | 19 +++++-------
arch/x86/platform/intel-mid/sfi.c | 58 ++++++++++++++++---------------------
arch/x86/platform/sfi/sfi.c | 4 ++-
3 files changed, 35 insertions(+), 46 deletions(-)
diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c
index fcbdc5fac2c6..337d165c64f1 100644
--- a/arch/x86/pci/intel_mid_pci.c
+++ b/arch/x86/pci/intel_mid_pci.c
@@ -208,27 +208,22 @@ static int pci_write(struct pci_bus *bus, unsigned int devfn, int where,
static int intel_mid_pci_irq_enable(struct pci_dev *dev)
{
- u8 pin;
- struct io_apic_irq_attr irq_attr;
+ int polarity;
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+ if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER)
+ polarity = 0; /* active high */
+ else
+ polarity = 1; /* active low */
/*
* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
* IOAPIC RTE entries, so we just enable RTE for the device.
*/
+ if (mp_set_gsi_attr(dev->irq, 1, polarity, dev_to_node(&dev->dev)))
+ return -EBUSY;
if (mp_map_gsi_to_irq(dev->irq, IOAPIC_MAP_ALLOC) < 0)
return -EBUSY;
- irq_attr.ioapic = mp_find_ioapic(dev->irq);
- irq_attr.ioapic_pin = dev->irq;
- irq_attr.trigger = 1; /* level */
- if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER)
- irq_attr.polarity = 0; /* active high */
- else
- irq_attr.polarity = 1; /* active low */
- io_apic_set_pci_routing(&dev->dev, dev->irq, &irq_attr);
-
return 0;
}
diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c
index 7161395e7de7..3c53a90fdb18 100644
--- a/arch/x86/platform/intel-mid/sfi.c
+++ b/arch/x86/platform/intel-mid/sfi.c
@@ -432,9 +432,8 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
struct sfi_table_simple *sb;
struct sfi_device_table_entry *pentry;
struct devs_id *dev = NULL;
- int num, i;
- int ioapic;
- struct io_apic_irq_attr irq_attr;
+ int num, i, ret;
+ int polarity;
sb = (struct sfi_table_simple *)table;
num = SFI_GET_NUM_ENTRIES(sb, struct sfi_device_table_entry);
@@ -448,37 +447,30 @@ static int __init sfi_parse_devs(struct sfi_table_header *table)
* devices, but they have separate RTE entry in IOAPIC
* so we have to enable them one by one here
*/
- ioapic = mp_find_ioapic(irq);
- if (ioapic >= 0) {
- irq_attr.ioapic = ioapic;
- irq_attr.ioapic_pin = irq;
- irq_attr.trigger = 1;
- if (intel_mid_identify_cpu() ==
- INTEL_MID_CPU_CHIP_TANGIER) {
- if (!strncmp(pentry->name,
- "r69001-ts-i2c", 13))
- /* active low */
- irq_attr.polarity = 1;
- else if (!strncmp(pentry->name,
- "synaptics_3202", 14))
- /* active low */
- irq_attr.polarity = 1;
- else if (irq == 41)
- /* fast_int_1 */
- irq_attr.polarity = 1;
- else
- /* active high */
- irq_attr.polarity = 0;
- } else {
- /* PNW and CLV go with active low */
- irq_attr.polarity = 1;
- }
- WARN_ON(mp_map_gsi_to_irq(irq,
- IOAPIC_MAP_ALLOC) < 0);
- io_apic_set_pci_routing(NULL, irq, &irq_attr);
+ if (intel_mid_identify_cpu() ==
+ INTEL_MID_CPU_CHIP_TANGIER) {
+ if (!strncmp(pentry->name, "r69001-ts-i2c", 13))
+ /* active low */
+ polarity = 1;
+ else if (!strncmp(pentry->name,
+ "synaptics_3202", 14))
+ /* active low */
+ polarity = 1;
+ else if (irq == 41)
+ /* fast_int_1 */
+ polarity = 1;
+ else
+ /* active high */
+ polarity = 0;
+ } else {
+ /* PNW and CLV go with active low */
+ polarity = 1;
}
- } else {
- irq = 0; /* No irq */
+
+ ret = mp_set_gsi_attr(irq, 1, polarity, NUMA_NO_NODE);
+ if (ret == 0)
+ ret = mp_map_gsi_to_irq(irq, IOAPIC_MAP_ALLOC);
+ WARN_ON(ret < 0);
}
dev = get_device_id(pentry->type, pentry->name);
diff --git a/arch/x86/platform/sfi/sfi.c b/arch/x86/platform/sfi/sfi.c
index cda31be8dbe5..ed0e131c1202 100644
--- a/arch/x86/platform/sfi/sfi.c
+++ b/arch/x86/platform/sfi/sfi.c
@@ -71,7 +71,9 @@ static int __init sfi_parse_cpus(struct sfi_table_header *table)
#endif /* CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_X86_IO_APIC
-static struct irq_domain_ops sfi_ioapic_irqdomain_ops;
+static struct irq_domain_ops sfi_ioapic_irqdomain_ops = {
+ .map = mp_irqdomain_map,
+};
static struct irq_domain *sfi_ioapic_create_irqdomain(int ioapic, void *arg)
{
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists