[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <53844829.5050005@arm.com>
Date: Tue, 27 May 2014 09:09:13 +0100
From: Marc Zyngier <marc.zyngier@....com>
To: Chen-Yu Tsai <wens@...e.org>
CC: Maxime Ripard <maxime.ripard@...e-electrons.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Samuel Ortiz <sameo@...ux.intel.com>,
Lee Jones <lee.jones@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mike Turquette <mturquette@...aro.org>,
Emilio Lopez <emilio@...pez.com.ar>,
Linus Walleij <linus.walleij@...aro.org>,
"linux-serial@...r.kernel.org" <linux-serial@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
devicetree <devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
Hans de Goede <hdegoede@...hat.com>,
Boris BREZILLON <boris.brezillon@...e-electrons.com>,
Luc Verhaegen <libv@...net.be>
Subject: Re: [PATCH 20/22] ARM: sun8i: Add SMP support for the Allwinner A23
On 26/05/14 04:57, Chen-Yu Tsai wrote:
> On Mon, May 26, 2014 at 3:26 AM, Maxime Ripard
> <maxime.ripard@...e-electrons.com> wrote:
>> On Fri, May 23, 2014 at 03:51:23PM +0800, Chen-Yu Tsai wrote:
>>> The A23 is a dual Cortex-A7. Add the logic to use the IPs used to
>>> control the CPU configuration and the CPU power so that we can
>>> bring up secondary CPUs at boot.
>>>
>>> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
>>> ---
>>> arch/arm/mach-sunxi/platsmp.c | 69 +++++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 69 insertions(+)
>>>
>>> diff --git a/arch/arm/mach-sunxi/platsmp.c b/arch/arm/mach-sunxi/platsmp.c
>>> index c53077b..688faaf 100644
>>> --- a/arch/arm/mach-sunxi/platsmp.c
>>> +++ b/arch/arm/mach-sunxi/platsmp.c
>>> @@ -121,3 +121,72 @@ struct smp_operations sun6i_smp_ops __initdata = {
>>> .smp_boot_secondary = sun6i_smp_boot_secondary,
>>> };
>>> CPU_METHOD_OF_DECLARE(sun6i_smp, "allwinner,sun6i-a31", &sun6i_smp_ops);
>>> +
>>> +static void __init sun8i_smp_prepare_cpus(unsigned int max_cpus)
>>> +{
>>> + struct device_node *node;
>>> +
>>> + node = of_find_compatible_node(NULL, NULL, "allwinner,sun8i-a23-prcm");
>>> + if (!node) {
>>> + pr_err("Missing A23 PRCM node in the device tree\n");
>>> + return;
>>> + }
>>> +
>>> + prcm_membase = of_iomap(node, 0);
>>> + if (!prcm_membase) {
>>> + pr_err("Couldn't map A23 PRCM registers\n");
>>> + return;
>>> + }
>>> +
>>> + node = of_find_compatible_node(NULL, NULL,
>>> + "allwinner,sun8i-a23-cpuconfig");
>>> + if (!node) {
>>> + pr_err("Missing A23 CPU config node in the device tree\n");
>>> + return;
>>> + }
>>> +
>>> + cpucfg_membase = of_iomap(node, 0);
>>> + if (!cpucfg_membase)
>>> + pr_err("Couldn't map A23 CPU config registers\n");
>>> +
>>> +}
>>> +
>>> +static int sun8i_smp_boot_secondary(unsigned int cpu,
>>> + struct task_struct *idle)
>>> +{
>>> + u32 reg;
>>> +
>>> + if (!(prcm_membase && cpucfg_membase))
>>> + return -EFAULT;
>>> +
>>> + spin_lock(&cpu_lock);
>>> +
>>> + /* Set CPU boot address */
>>> + writel(virt_to_phys(secondary_startup),
>>> + cpucfg_membase + CPUCFG_PRIVATE0_REG);
>>> +
>>> + /* Assert the CPU core in reset */
>>> + writel(0, cpucfg_membase + CPUCFG_CPU_RST_CTRL_REG(cpu));
>>> +
>>> + /* Assert the L1 cache in reset */
>>> + reg = readl(cpucfg_membase + CPUCFG_GEN_CTRL_REG);
>>> + writel(reg & ~BIT(cpu), cpucfg_membase + CPUCFG_GEN_CTRL_REG);
>>> +
>>> + /* Clear CPU power-off gating */
>>> + reg = readl(prcm_membase + PRCM_CPU_PWROFF_REG);
>>> + writel(reg & ~BIT(cpu), prcm_membase + PRCM_CPU_PWROFF_REG);
>>> + mdelay(1);
>>> +
>>> + /* Deassert the CPU core reset */
>>> + writel(3, cpucfg_membase + CPUCFG_CPU_RST_CTRL_REG(cpu));
>>> +
>>> + spin_unlock(&cpu_lock);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +struct smp_operations sun8i_smp_ops __initdata = {
>>> + .smp_prepare_cpus = sun8i_smp_prepare_cpus,
>>> + .smp_boot_secondary = sun8i_smp_boot_secondary,
>>> +};
>>> +CPU_METHOD_OF_DECLARE(sun8i_smp, "allwinner,sun8i-a23", &sun8i_smp_ops);
>>
>> You forgot to document the new enable-method.
>
> I will add it.
>
>> Also, is there any plan to hae a working u-boot? I'd much prefer to
>> use PSCI if possible.
>
> IIRC PSCI needs a secure SRAM block to store its program code.
> Unfortunately the A23 doesn't have secure SRAM. I think it is
> missing other security related features as well.
>
> Or could it just live in generic SRAM, and the kernel marks it
> as reserved or something.
>
> Maybe Marc Zyngier (CCed) can shed some light on this?
No secure SRAM is required. You can normal SRAM, or even a normal region
of RAM that is accessed from secure mode. Not as nice as having proper
SRAM as on sun7i, but still perfectly functional.
Please consider having a proper PSCI implementation instead of always
adding more code that will effectively lock people out of using the
virtualization features the core has.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists