lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Thu, 29 May 2014 01:20:05 +0200
From:	Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To:	Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	Nicolas Ferre <nicolas.ferre@...el.com>,
	Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
	Haavard Skinnemoen <hskinnemoen@...il.com>,
	Hans-Christian Egtvedt <egtvedt@...fundet.no>,
	Bryan Wu <cooloney@...il.com>,
	Jingoo Han <jg1.han@...sung.com>, linux-leds@...r.kernel.org,
	linux-pwm@...r.kernel.org, linux-fbdev@...r.kernel.org,
	Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Subject: [PATCHv2 02/15] ARM: at91: sam9m10g45ek: use generic leds_pwm driver

Switch to the generic leds_pwm driver instead of leds-atmel-pwm.

Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@...el.com>
---
 arch/arm/mach-at91/board-sam9m10g45ek.c | 42 ++++++++++++++++++++++++++-------
 1 file changed, 33 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 1ea61328f30d..b227732b0c83 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -26,6 +26,8 @@
 #include <linux/leds.h>
 #include <linux/atmel-mci.h>
 #include <linux/delay.h>
+#include <linux/pwm.h>
+#include <linux/leds_pwm.h>
 
 #include <linux/platform_data/at91_adc.h>
 
@@ -416,7 +418,7 @@ static struct gpio_led ek_leds[] = {
 		.active_low		= 1,
 		.default_trigger	= "nand-disk",
 	},
-#if !(defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE))
+#if !IS_ENABLED(CONFIG_LEDS_PWM)
 	{	/* "right" led, green, userled1, pwm1 */
 		.name			= "d7",
 		.gpio			= AT91_PIN_PD31,
@@ -430,22 +432,41 @@ static struct gpio_led ek_leds[] = {
 /*
  * PWM Leds
  */
-static struct gpio_led ek_pwm_led[] = {
-#if defined(CONFIG_LEDS_ATMEL_PWM) || defined(CONFIG_LEDS_ATMEL_PWM_MODULE)
+static struct pwm_lookup pwm_lookup[] = {
+	PWM_LOOKUP("at91sam9rl-pwm", 1, "leds_pwm", "d7",
+		   5000, PWM_POLARITY_INVERSED),
+};
+
+#if IS_ENABLED(CONFIG_LEDS_PWM)
+static struct led_pwm pwm_leds[] = {
 	{	/* "right" led, green, userled1, pwm1 */
-		.name			= "d7",
-		.gpio			= 1,	/* is PWM channel number */
-		.active_low		= 1,
-		.default_trigger	= "none",
+		.name = "d7",
+		.max_brightness	= 255,
 	},
-#endif
 };
 
+static struct led_pwm_platform_data pwm_data = {
+	.num_leds	= ARRAY_SIZE(pwm_leds),
+	.leds		= pwm_leds,
+};
+
+static struct platform_device leds_pwm = {
+	.name	= "leds_pwm",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &pwm_data,
+	},
+};
+#endif
+
 static struct platform_device *devices[] __initdata = {
 #if defined(CONFIG_SOC_CAMERA_OV2640) || \
 	defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
 	&isi_ov2640,
 #endif
+#if IS_ENABLED(CONFIG_LEDS_PWM)
+	&leds_pwm,
+#endif
 };
 
 static void __init ek_board_init(void)
@@ -486,7 +507,10 @@ static void __init ek_board_init(void)
 	at91_add_device_ac97(&ek_ac97_data);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
+	pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
+#if IS_ENABLED(CONFIG_LEDS_PWM)
+	at91_add_device_pwm(1 << AT91_PWM1);
+#endif
 	/* Other platform devices */
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ