| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1401319218-16772-12-git-send-email-alexandre.belloni@free-electrons.com>
Date: Thu, 29 May 2014 01:20:14 +0200
From: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Nicolas Ferre <nicolas.ferre@...el.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Haavard Skinnemoen <hskinnemoen@...il.com>,
Hans-Christian Egtvedt <egtvedt@...fundet.no>,
Bryan Wu <cooloney@...il.com>,
Jingoo Han <jg1.han@...sung.com>, linux-leds@...r.kernel.org,
linux-pwm@...r.kernel.org, linux-fbdev@...r.kernel.org,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Subject: [PATCHv2 11/15] avr32: favr-32: use generic pwm_bl driver
Switch to the generic pwm_bl driver instead of atmel-pwm-bl.
Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@...fundet.no>
---
arch/avr32/boards/favr-32/setup.c | 48 ++++++++++++++++++++++--------------
arch/avr32/configs/favr-32_defconfig | 6 ++---
2 files changed, 33 insertions(+), 21 deletions(-)
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 1f121497b517..234cb071c601 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -18,7 +18,10 @@
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/atmel-mci.h>
-#include <linux/atmel-pwm-bl.h>
+#include <linux/pwm.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/machine.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
@@ -33,6 +36,8 @@
#include <mach/board.h>
#include <mach/portmux.h>
+#define PWM_BL_CH 2
+
/* Oscillator frequencies. These are board-specific */
unsigned long at32_board_osc_rates[3] = {
[0] = 32768, /* 32.768 kHz on RTC osc */
@@ -227,29 +232,36 @@ void __init favr32_setup_leds(void)
platform_device_register(&favr32_led_dev);
}
-static struct atmel_pwm_bl_platform_data atmel_pwm_bl_pdata = {
- .pwm_channel = 2,
- .pwm_frequency = 200000,
- .pwm_compare_max = 345,
- .pwm_duty_max = 345,
- .pwm_duty_min = 90,
- .pwm_active_low = 1,
- .gpio_on = GPIO_PIN_PA(28),
- .on_active_low = 0,
+static struct pwm_lookup pwm_lookup[] = {
+ PWM_LOOKUP("at91sam9rl-pwm", PWM_BL_CH, "pwm-backlight.0", NULL,
+ 5000, PWM_POLARITY_INVERSED),
};
-static struct platform_device atmel_pwm_bl_dev = {
- .name = "atmel-pwm-bl",
- .id = 0,
- .dev = {
- .platform_data = &atmel_pwm_bl_pdata,
+static struct regulator_consumer_supply fixed_power_consumers[] = {
+ REGULATOR_SUPPLY("power", "pwm-backlight.0"),
+};
+
+static struct platform_pwm_backlight_data pwm_bl_data = {
+ .enable_gpio = GPIO_PIN_PA(28),
+ .max_brightness = 255,
+ .dft_brightness = 255,
+ .lth_brightness = 50,
+};
+
+static struct platform_device pwm_bl_device = {
+ .name = "pwm-backlight",
+ .dev = {
+ .platform_data = &pwm_bl_data,
},
};
static void __init favr32_setup_atmel_pwm_bl(void)
{
- platform_device_register(&atmel_pwm_bl_dev);
- at32_select_gpio(atmel_pwm_bl_pdata.gpio_on, 0);
+ pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
+ regulator_register_always_on(0, "fixed", fixed_power_consumers,
+ ARRAY_SIZE(fixed_power_consumers), 3300000);
+ platform_device_register(&pwm_bl_device);
+ at32_select_gpio(pwm_bl_data.enable_gpio, 0);
}
void __init setup_board(void)
@@ -339,7 +351,7 @@ static int __init favr32_init(void)
set_abdac_rate(at32_add_device_abdac(0, &abdac0_data));
- at32_add_device_pwm(1 << atmel_pwm_bl_pdata.pwm_channel);
+ at32_add_device_pwm(1 << PWM_BL_CH);
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
at32_add_device_mci(0, &mci0_data);
at32_add_device_usba(0, NULL);
diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig
index 07bed3f7eb5e..b3eb67dc05ac 100644
--- a/arch/avr32/configs/favr-32_defconfig
+++ b/arch/avr32/configs/favr-32_defconfig
@@ -67,7 +67,6 @@ CONFIG_MTD_PHYSMAP=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
-CONFIG_ATMEL_PWM=m
CONFIG_ATMEL_TCLIB=y
CONFIG_ATMEL_SSC=m
CONFIG_NETDEVICES=y
@@ -108,7 +107,7 @@ CONFIG_FB=y
CONFIG_FB_ATMEL=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_ATMEL_PWM=m
+CONFIG_BACKLIGHT_PWM=m
CONFIG_SOUND=m
CONFIG_SOUND_PRIME=m
# CONFIG_HID_SUPPORT is not set
@@ -123,7 +122,6 @@ CONFIG_MMC=y
CONFIG_MMC_ATMELMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
@@ -132,6 +130,8 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT32AP700X=y
CONFIG_DMADEVICES=y
+CONFIG_PWM=y
+CONFIG_PWM_ATMEL=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists