| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1401319218-16772-15-git-send-email-alexandre.belloni@free-electrons.com>
Date: Thu, 29 May 2014 01:20:17 +0200
From: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
Nicolas Ferre <nicolas.ferre@...el.com>,
Jean-Christophe Plagniol-Villard <plagnioj@...osoft.com>,
Haavard Skinnemoen <hskinnemoen@...il.com>,
Hans-Christian Egtvedt <egtvedt@...fundet.no>,
Bryan Wu <cooloney@...il.com>,
Jingoo Han <jg1.han@...sung.com>, linux-leds@...r.kernel.org,
linux-pwm@...r.kernel.org, linux-fbdev@...r.kernel.org,
Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Subject: [PATCHv2 14/15] leds: atmel-pwm: remove obsolete driver
The leds-atmel-pwm driver is now obsolete. It is not used by any mainlined
boards and is replaced by the generic leds_pwm with the pwm-atmel driver using
the generic PWM framework.
Signed-off-by: Alexandre Belloni <alexandre.belloni@...e-electrons.com>
Acked-by: Bryan Wu <cooloney@...il.com>
---
drivers/leds/Kconfig | 8 ---
drivers/leds/Makefile | 1 -
drivers/leds/leds-atmel-pwm.c | 149 ------------------------------------------
3 files changed, 158 deletions(-)
delete mode 100644 drivers/leds/leds-atmel-pwm.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 6784c177eed1..27cf0cdcdaab 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -29,14 +29,6 @@ config LEDS_88PM860X
This option enables support for on-chip LED drivers found on Marvell
Semiconductor 88PM8606 PMIC.
-config LEDS_ATMEL_PWM
- tristate "LED Support using Atmel PWM outputs"
- depends on LEDS_CLASS
- depends on ATMEL_PWM
- help
- This option enables support for LEDs driven using outputs
- of the dedicated PWM controller found on newer Atmel SOCs.
-
config LEDS_LM3530
tristate "LCD Backlight driver for LM3530"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 79c5155199a7..3c036663f17b 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -6,7 +6,6 @@ obj-$(CONFIG_LEDS_TRIGGERS) += led-triggers.o
# LED Platform Drivers
obj-$(CONFIG_LEDS_88PM860X) += leds-88pm860x.o
-obj-$(CONFIG_LEDS_ATMEL_PWM) += leds-atmel-pwm.o
obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o
diff --git a/drivers/leds/leds-atmel-pwm.c b/drivers/leds/leds-atmel-pwm.c
deleted file mode 100644
index 56cec8d6a2ac..000000000000
--- a/drivers/leds/leds-atmel-pwm.c
+++ /dev/null
@@ -1,149 +0,0 @@
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/io.h>
-#include <linux/atmel_pwm.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-
-
-struct pwmled {
- struct led_classdev cdev;
- struct pwm_channel pwmc;
- struct gpio_led *desc;
- u32 mult;
- u8 active_low;
-};
-
-
-/*
- * For simplicity, we use "brightness" as if it were a linear function
- * of PWM duty cycle. However, a logarithmic function of duty cycle is
- * probably a better match for perceived brightness: two is half as bright
- * as four, four is half as bright as eight, etc
- */
-static void pwmled_brightness(struct led_classdev *cdev, enum led_brightness b)
-{
- struct pwmled *led;
-
- /* update the duty cycle for the *next* period */
- led = container_of(cdev, struct pwmled, cdev);
- pwm_channel_writel(&led->pwmc, PWM_CUPD, led->mult * (unsigned) b);
-}
-
-/*
- * NOTE: we reuse the platform_data structure of GPIO leds,
- * but repurpose its "gpio" number as a PWM channel number.
- */
-static int pwmled_probe(struct platform_device *pdev)
-{
- const struct gpio_led_platform_data *pdata;
- struct pwmled *leds;
- int i;
- int status;
-
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata || pdata->num_leds < 1)
- return -ENODEV;
-
- leds = devm_kzalloc(&pdev->dev, pdata->num_leds * sizeof(*leds),
- GFP_KERNEL);
- if (!leds)
- return -ENOMEM;
-
- for (i = 0; i < pdata->num_leds; i++) {
- struct pwmled *led = leds + i;
- const struct gpio_led *dat = pdata->leds + i;
- u32 tmp;
-
- led->cdev.name = dat->name;
- led->cdev.brightness = LED_OFF;
- led->cdev.brightness_set = pwmled_brightness;
- led->cdev.default_trigger = dat->default_trigger;
-
- led->active_low = dat->active_low;
-
- status = pwm_channel_alloc(dat->gpio, &led->pwmc);
- if (status < 0)
- goto err;
-
- /*
- * Prescale clock by 2^x, so PWM counts in low MHz.
- * Start each cycle with the LED active, so increasing
- * the duty cycle gives us more time on (== brighter).
- */
- tmp = 5;
- if (!led->active_low)
- tmp |= PWM_CPR_CPOL;
- pwm_channel_writel(&led->pwmc, PWM_CMR, tmp);
-
- /*
- * Pick a period so PWM cycles at 100+ Hz; and a multiplier
- * for scaling duty cycle: brightness * mult.
- */
- tmp = (led->pwmc.mck / (1 << 5)) / 100;
- tmp /= 255;
- led->mult = tmp;
- pwm_channel_writel(&led->pwmc, PWM_CDTY,
- led->cdev.brightness * 255);
- pwm_channel_writel(&led->pwmc, PWM_CPRD,
- LED_FULL * tmp);
-
- pwm_channel_enable(&led->pwmc);
-
- /* Hand it over to the LED framework */
- status = led_classdev_register(&pdev->dev, &led->cdev);
- if (status < 0) {
- pwm_channel_free(&led->pwmc);
- goto err;
- }
- }
-
- platform_set_drvdata(pdev, leds);
- return 0;
-
-err:
- if (i > 0) {
- for (i = i - 1; i >= 0; i--) {
- led_classdev_unregister(&leds[i].cdev);
- pwm_channel_free(&leds[i].pwmc);
- }
- }
-
- return status;
-}
-
-static int pwmled_remove(struct platform_device *pdev)
-{
- const struct gpio_led_platform_data *pdata;
- struct pwmled *leds;
- unsigned i;
-
- pdata = dev_get_platdata(&pdev->dev);
- leds = platform_get_drvdata(pdev);
-
- for (i = 0; i < pdata->num_leds; i++) {
- struct pwmled *led = leds + i;
-
- led_classdev_unregister(&led->cdev);
- pwm_channel_free(&led->pwmc);
- }
-
- return 0;
-}
-
-static struct platform_driver pwmled_driver = {
- .driver = {
- .name = "leds-atmel-pwm",
- .owner = THIS_MODULE,
- },
- /* REVISIT add suspend() and resume() methods */
- .probe = pwmled_probe,
- .remove = pwmled_remove,
-};
-
-module_platform_driver(pwmled_driver);
-
-MODULE_DESCRIPTION("Driver for LEDs with PWM-controlled brightness");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:leds-atmel-pwm");
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists