linux-kernel - [PATCH v6 1/2] arm64: adjust el0_sync so that a function can be called

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1401394139-23469-2-git-send-email-larry.bassel@linaro.org>
Date:	Thu, 29 May 2014 13:08:58 -0700
From:	Larry Bassel <larry.bassel@...aro.org>
To:	catalin.marinas@....com, will.deacon@....com
Cc:	linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
	linaro-kernel@...ts.linaro.org, khilman@...aro.org,
	Larry Bassel <larry.bassel@...aro.org>
Subject: [PATCH v6 1/2] arm64: adjust el0_sync so that a function can be called

To implement the context tracker properly on arm64,
a function call needs to be made after debugging and
interrupts are turned on, but before the lr is changed
to point to ret_to_user(). If the function call
is made after the lr is changed the function will not
return to the correct place.

For similar reasons, defer the setting of x0 so that
it doesn't need to be saved around the function call
(save far_el1 in x26 temporarily instead).

Signed-off-by: Larry Bassel <larry.bassel@...aro.org>
---
 arch/arm64/kernel/entry.S | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/kernel/entry.S b/arch/arm64/kernel/entry.S
index e8b23a3..b0101b9 100644
--- a/arch/arm64/kernel/entry.S
+++ b/arch/arm64/kernel/entry.S
@@ -354,7 +354,6 @@ el0_sync:
 	lsr	x24, x25, #ESR_EL1_EC_SHIFT	// exception class
 	cmp	x24, #ESR_EL1_EC_SVC64		// SVC in 64-bit state
 	b.eq	el0_svc
-	adr	lr, ret_to_user
 	cmp	x24, #ESR_EL1_EC_DABT_EL0	// data abort in EL0
 	b.eq	el0_da
 	cmp	x24, #ESR_EL1_EC_IABT_EL0	// instruction abort in EL0
@@ -383,7 +382,6 @@ el0_sync_compat:
 	lsr	x24, x25, #ESR_EL1_EC_SHIFT	// exception class
 	cmp	x24, #ESR_EL1_EC_SVC32		// SVC in 32-bit state
 	b.eq	el0_svc_compat
-	adr	lr, ret_to_user
 	cmp	x24, #ESR_EL1_EC_DABT_EL0	// data abort in EL0
 	b.eq	el0_da
 	cmp	x24, #ESR_EL1_EC_IABT_EL0	// instruction abort in EL0
@@ -426,22 +424,25 @@ el0_da:
 	/*
 	 * Data abort handling
 	 */
-	mrs	x0, far_el1
-	bic	x0, x0, #(0xff << 56)
+	mrs	x26, far_el1
 	// enable interrupts before calling the main handler
 	enable_dbg_and_irq
+	bic	x0, x26, #(0xff << 56)
 	mov	x1, x25
 	mov	x2, sp
+	adr	lr, ret_to_user
 	b	do_mem_abort
 el0_ia:
 	/*
 	 * Instruction abort handling
 	 */
-	mrs	x0, far_el1
+	mrs	x26, far_el1
 	// enable interrupts before calling the main handler
 	enable_dbg_and_irq
+	mov	x0, x26
 	orr	x1, x25, #1 << 24		// use reserved ISS bit for instruction aborts
 	mov	x2, sp
+	adr	lr, ret_to_user
 	b	do_mem_abort
 el0_fpsimd_acc:
 	/*
@@ -450,6 +451,7 @@ el0_fpsimd_acc:
 	enable_dbg
 	mov	x0, x25
 	mov	x1, sp
+	adr	lr, ret_to_user
 	b	do_fpsimd_acc
 el0_fpsimd_exc:
 	/*
@@ -458,16 +460,19 @@ el0_fpsimd_exc:
 	enable_dbg
 	mov	x0, x25
 	mov	x1, sp
+	adr	lr, ret_to_user
 	b	do_fpsimd_exc
 el0_sp_pc:
 	/*
 	 * Stack or PC alignment exception handling
 	 */
-	mrs	x0, far_el1
+	mrs	x26, far_el1
 	// enable interrupts before calling the main handler
 	enable_dbg_and_irq
+	mov	x0, x26
 	mov	x1, x25
 	mov	x2, sp
+	adr	lr, ret_to_user
 	b	do_sp_pc_abort
 el0_undef:
 	/*
@@ -476,6 +481,7 @@ el0_undef:
 	// enable interrupts before calling the main handler
 	enable_dbg_and_irq
 	mov	x0, sp
+	adr	lr, ret_to_user
 	b	do_undefinstr
 el0_dbg:
 	/*
@@ -493,6 +499,7 @@ el0_inv:
 	mov	x0, sp
 	mov	x1, #BAD_SYNC
 	mrs	x2, esr_el1
+	adr	lr, ret_to_user
 	b	bad_mode
 ENDPROC(el0_sync)
 
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/