| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1401345427-5299-9-git-send-email-benjamin.gaignard@linaro.org>
Date: Thu, 29 May 2014 08:37:04 +0200
From: Benjamin Gaignard <benjamin.gaignard@...aro.org>
To: dri-devel@...ts.freedesktop.org, linaro-mm-sig@...ts.linaro.org,
linux-kernel@...r.kernel.org, airlied@...ux.ie
Cc: lee.jones@...aro.org,
Benjamin Gaignard <benjamin.gaignard@...aro.org>
Subject: [PATCH v4 08/11] drm: sti: add VID layer
VIDeo plug are one of the compositor input sub-devices.
VID are dedicated to video inputs like YUV plans.
Like GDP, VID are part of Compositor hardware block
and use sti_layer structure to provide an abstraction for
Compositor calls.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@...aro.org>
---
drivers/gpu/drm/sti/Makefile | 3 +-
drivers/gpu/drm/sti/sti_layer.h | 3 +
drivers/gpu/drm/sti/sti_vid.c | 138 ++++++++++++++++++++++++++++++++++++++++
drivers/gpu/drm/sti/sti_vid.h | 33 ++++++++++
4 files changed, 176 insertions(+), 1 deletion(-)
create mode 100644 drivers/gpu/drm/sti/sti_vid.c
create mode 100644 drivers/gpu/drm/sti/sti_vid.h
diff --git a/drivers/gpu/drm/sti/Makefile b/drivers/gpu/drm/sti/Makefile
index 1745697..bb0f6b3 100644
--- a/drivers/gpu/drm/sti/Makefile
+++ b/drivers/gpu/drm/sti/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_DRM_STI) += \
sti_hdmi_tx3g4c28phy.o \
sti_hda.o \
sti_tvout.o \
- sti_gdp.o
\ No newline at end of file
+ sti_gdp.o \
+ sti_vid.o
\ No newline at end of file
diff --git a/drivers/gpu/drm/sti/sti_layer.h b/drivers/gpu/drm/sti/sti_layer.h
index 7ba5a40..c8a159d 100644
--- a/drivers/gpu/drm/sti/sti_layer.h
+++ b/drivers/gpu/drm/sti/sti_layer.h
@@ -11,6 +11,7 @@
#include <drm/drmP.h>
#include "sti_gdp.h"
+#include "sti_vid.h"
#define to_sti_layer(x) container_of(x, struct sti_layer, plane)
@@ -70,6 +71,7 @@ struct sti_fps_info {
* @paddr: physical address of the input buffer
* @fps_info: frame per second info
* @gdp: related GDP (if the layer is a GDP)
+ * @vid: related VID (if the layer is a VID/VDP)
*/
struct sti_layer {
struct drm_plane plane;
@@ -89,6 +91,7 @@ struct sti_layer {
dma_addr_t paddr;
struct sti_fps_info fps_info;
struct sti_gdp *gdp;
+ struct sti_vid *vid;
};
struct sti_layer *sti_layer_create(struct device *dev, int desc,
diff --git a/drivers/gpu/drm/sti/sti_vid.c b/drivers/gpu/drm/sti/sti_vid.c
new file mode 100644
index 0000000..0197291
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_vid.c
@@ -0,0 +1,138 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Fabien Dessenne <fabien.dessenne@...com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <drm/drmP.h>
+
+#include "sti_layer.h"
+#include "sti_vid.h"
+#include "sti_vtg.h"
+
+/* Registers */
+#define VID_CTL 0x00
+#define VID_ALP 0x04
+#define VID_CLF 0x08
+#define VID_VPO 0x0C
+#define VID_VPS 0x10
+#define VID_KEY1 0x28
+#define VID_KEY2 0x2C
+#define VID_MPR0 0x30
+#define VID_MPR1 0x34
+#define VID_MPR2 0x38
+#define VID_MPR3 0x3C
+#define VID_MST 0x68
+#define VID_BC 0x70
+#define VID_TINT 0x74
+#define VID_CSAT 0x78
+
+/* Registers values */
+#define VID_CTL_IGNORE (BIT(31) | BIT(30))
+#define VID_CTL_PSI_ENABLE (BIT(2) | BIT(1) | BIT(0))
+#define VID_ALP_OPAQUE 0x00000080
+#define VID_BC_DFLT 0x00008000
+#define VID_TINT_DFLT 0x00000000
+#define VID_CSAT_DFLT 0x00000080
+/* YCbCr to RGB BT709:
+ * R = Y+1.5391Cr
+ * G = Y-0.4590Cr-0.1826Cb
+ * B = Y+1.8125Cb */
+#define VID_MPR0_BT709 0x0A800000
+#define VID_MPR1_BT709 0x0AC50000
+#define VID_MPR2_BT709 0x07150545
+#define VID_MPR3_BT709 0x00000AE8
+
+static int sti_vid_prepare_layer(void *lay, bool first_prepare)
+{
+ u32 val;
+ struct sti_layer *layer = (struct sti_layer *)lay;
+ struct sti_vid *vid = layer->vid;
+
+ /* Unmask */
+ val = readl(vid->regs + VID_CTL);
+ val &= ~VID_CTL_IGNORE;
+ writel(val, vid->regs + VID_CTL);
+
+ return 0;
+}
+
+static int sti_vid_commit_layer(void *lay)
+{
+ struct sti_layer *layer = (struct sti_layer *)lay;
+ struct sti_vid *vid = layer->vid;
+ struct drm_display_mode *mode = layer->mode;
+ u32 ydo, xdo, yds, xds;
+
+ ydo = sti_vtg_get_line_number(*mode, layer->dst_y);
+ yds = sti_vtg_get_line_number(*mode, layer->dst_y + layer->dst_h - 1);
+ xdo = sti_vtg_get_pixel_number(*mode, layer->dst_x);
+ xds = sti_vtg_get_pixel_number(*mode, layer->dst_x + layer->dst_w - 1);
+
+ writel((ydo << 16) | xdo, vid->regs + VID_VPO);
+ writel((yds << 16) | xds, vid->regs + VID_VPS);
+
+ return 0;
+}
+
+static int sti_vid_disable_layer(void *lay)
+{
+ u32 val;
+ struct sti_layer *layer = (struct sti_layer *)lay;
+ struct sti_vid *vid = layer->vid;
+
+ /* Mask */
+ val = readl(vid->regs + VID_CTL);
+ val |= VID_CTL_IGNORE;
+ writel(val, vid->regs + VID_CTL);
+
+ return 0;
+}
+
+static void sti_vid_set_default(struct sti_vid *vid)
+{
+ /* Enable PSI, Mask layer */
+ writel(VID_CTL_PSI_ENABLE | VID_CTL_IGNORE, vid->regs + VID_CTL);
+
+ /* Opaque */
+ writel(VID_ALP_OPAQUE, vid->regs + VID_ALP);
+
+ /* Color conversion parameters */
+ writel(VID_MPR0_BT709, vid->regs + VID_MPR0);
+ writel(VID_MPR1_BT709, vid->regs + VID_MPR1);
+ writel(VID_MPR2_BT709, vid->regs + VID_MPR2);
+ writel(VID_MPR3_BT709, vid->regs + VID_MPR3);
+
+ /* Brightness, contrast, tint, saturation */
+ writel(VID_BC_DFLT, vid->regs + VID_BC);
+ writel(VID_TINT_DFLT, vid->regs + VID_TINT);
+ writel(VID_CSAT_DFLT, vid->regs + VID_CSAT);
+}
+
+struct sti_vid *sti_vid_create(struct device *dev, void __iomem *baseaddr)
+{
+ struct sti_vid *vid;
+
+ DRM_DEBUG_DRIVER("\n");
+
+ vid = devm_kzalloc(dev, sizeof(*vid), GFP_KERNEL);
+ if (!vid) {
+ DRM_ERROR("Failed to allocate memory for VID\n");
+ return NULL;
+ }
+
+ vid->dev = dev;
+ vid->regs = baseaddr;
+ vid->prepare = sti_vid_prepare_layer;
+ vid->commit = sti_vid_commit_layer;
+ vid->disable = sti_vid_disable_layer;
+ /* As the VID input is HW-mapped to the VDP output, the supported
+ * formats are under the VDP control */
+ vid->get_formats = NULL;
+ vid->get_nb_formats = NULL;
+
+ /* Set default configuration (static) */
+ sti_vid_set_default(vid);
+
+ return vid;
+}
diff --git a/drivers/gpu/drm/sti/sti_vid.h b/drivers/gpu/drm/sti/sti_vid.h
new file mode 100644
index 0000000..4a502b0
--- /dev/null
+++ b/drivers/gpu/drm/sti/sti_vid.h
@@ -0,0 +1,33 @@
+/*
+ * Copyright (C) STMicroelectronics SA 2014
+ * Author: Fabien Dessenne <fabien.dessenne@...com> for STMicroelectronics.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#ifndef _STI_VID_H_
+#define _STI_VID_H_
+
+/*
+ * STI VID structure
+ *
+ * @device: driver device
+ * @regs: subdevice register
+ * @get_formats: get VID supported formats
+ * @get_nb_formats: get number of format supported
+ * @prepare: prepare VID before rendering
+ * @commit: set VID for rendering
+ * @disable: disable VID
+ */
+struct sti_vid {
+ struct device *dev;
+ void __iomem *regs;
+ const uint32_t* (*get_formats)(void);
+ unsigned int (*get_nb_formats)(void);
+ int (*prepare)(void *layer, bool first_prepare);
+ int (*commit)(void *layer);
+ int (*disable)(void *layer);
+};
+
+struct sti_vid *sti_vid_create(struct device *dev, void __iomem *baseaddr);
+
+#endif
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists