linux-kernel - [PATCH v4 0/7] clk: bcm: prerequisite and bus clock support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1401483188-5395-1-git-send-email-elder@linaro.org>
Date:	Fri, 30 May 2014 15:53:01 -0500
From:	Alex Elder <elder@...aro.org>
To:	mturquette@...aro.org, mporter@...aro.org, bcm@...thebug.org
Cc:	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v4 0/7] clk: bcm: prerequisite and bus clock support

Currently only peripheral clocks are supported for Broadcom platforms
that use Kona style CCUs for clocking.  This series adds support for
bus clocks as well.

One motivation for doing this is that there exist peripheral clocks
that cannot be configured without having first enabled a related bus
clock.  Adding bus clock support allows such peripheral clocks to be
usable.

This also imposes a new requirement, however--that the bus clock be
enabled *before* operating on the clock that depends on it.  For
this, we define the notion of a "prerequisite" clock.  If a clock
has a prerequisite specified, that prequisite clock will be prepared
and enabled at the beginning  of the dependent clock's ->prepare
method.  The prerequisite clock is similarly disabled and unprepared
at the end of the dependent clock's ->unprepare method.

These patches are based on Mike Turquette's current "clk-next"
branch.
    9ec2749 clk: qcom: Return error pointers for unimplemented clocks

They are available here:
    http://git.linaro.org/landing-teams/working/broadcom/kernel.git
    Branch review/bcm-bus-clk-v4

					-Alex

Version history:
v4  - Remove boot-time initialization of clocks, opting instead to
      do this work when needed, via clock ->prepare method.
    - Prerequisite clocks are now prepared and enabled as
      in a dependent clock's ->prepare method.
    - Use __clk_lookup() to get the prerequisite clock pointer.
    - ccu_write_enable() calls can now be nested
v3: - Deleted clk_lookup field from struct kona_clk.
    - Now use term "initialized" rather than "enabled".
v2: - Added field "p" to the previously unnamed prereq union.

Alex Elder (7):
  clk: kona: allow nested ccu_write_enable() requests
  clk: kona: move some code
  clk: kona: don't init clocks at startup time
  clk: bcm281xx: implement prerequisite clocks
  clk: bcm281xx: add bus clock support
  clk: bcm281xx: define a bus clock
  ARM: dts: add bus clock bsc3_apb for bcm281xx

 arch/arm/boot/dts/bcm11351.dtsi      |   3 +-
 drivers/clk/bcm/clk-bcm281xx.c       |  13 +-
 drivers/clk/bcm/clk-kona-setup.c     | 123 ++++++++++++-
 drivers/clk/bcm/clk-kona.c           | 325 ++++++++++++++++++++++++-----------
 drivers/clk/bcm/clk-kona.h           |  31 +++-
 include/dt-bindings/clock/bcm281xx.h |   3 +-
 6 files changed, 387 insertions(+), 111 deletions(-)

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/