| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20140603054732.GA14876@kroah.com>
Date: Mon, 2 Jun 2014 22:47:32 -0700
From: Greg KH <gregkh@...uxfoundation.org>
To: Linus Torvalds <torvalds@...ux-foundation.org>,
Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-kernel@...r.kernel.org, linux-usb@...r.kernel.org
Subject: [GIT PULL] USB driver patches for 3.16-rc1
The following changes since commit d6d211db37e75de2ddc3a4f979038c40df7cc79c:
Linux 3.15-rc5 (2014-05-09 13:10:52 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ tags/usb-3.16-rc1
for you to fetch changes up to 4a95b1fce97756d0333f8232eb7ed6974e93b054:
usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y (2014-06-02 15:16:33 -0700)
----------------------------------------------------------------
USB driver patches for 3.16-rc1
Here is the big USB driver pull request for 3.16-rc1.
Nothing huge here, but lots of little things in the USB core, and in
lots of drivers. Hopefully the USB power management will be work better
now that it has been reworked to do per-port power control dynamically.
There's also a raft of gadget driver updates and fixes, CONFIG_USB_DEBUG
is finally gone now that everything has been converted over to the
dynamic debug inteface, the last hold-out drivers were cleaned up and
the config option removed. There were also other minor things all
through the drivers/usb/ tree, the shortlog shows this pretty well.
All have been in linux-next, including the very last patch, which came
from linux-next to fix a build issue on some platforms.
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
----------------------------------------------------------------
Alan Stern (1):
USB: mutual exclusion for resetting a hub and power-managing a port
Aleksander Morgado (2):
usb: qcserial: add Netgear AirCard 341U
usb: qcserial: add additional Sierra Wireless QMI devices
Alexander Gordeev (1):
xhci: Use pci_enable_msix_exact() instead of pci_enable_msix()
Alexander Shiyan (1):
usb: chipidea: core: Add missing module owner field
Alexandre Belloni (1):
usb: gadget: atmel_usba: always test udc->driver
Alexey Khoroshilov (1):
usb: gadget: gr_udc: unconditionally use GFP_ATOMIC in gr_queue_ext()
Andreas Larsson (7):
usb: gadget: gr_udc: improve platform_device variable name
usb: gadget: gr_udc: Expand devicetree documentation
usb: gadget: gr_udc: Use platform_get_irq instead of irq_of_parse_and_map
usb: gadget: gr_udc: Use of_property_read_u32_index to access arrays
usb: gadget: gr_udc: Add ep.maxpacket_limit to debugfs information
usb: gadget: gr_udc: Return error code when trying to set ep.maxpacket > ep.maxpacket_limit
usb: gadget: gr_udc: Use GFP_ATOMIC when allocating under held spinlock
Andrzej Pietrasiewicz (9):
usb: gadget: FunctionFS: share VLA macros with all usb gadget files
usb: gadget: OS String support
usb: gadget: OS Feature Descriptors support
usb: gadget: f_rndis: OS descriptors support
usb: gadget: configfs: OS String support
usb: gadget: configfs: OS Extended Compatibility descriptors support
usb: gadget: f_rndis: OS Descriptors configfs support
usb: gadget: configfs: OS Extended Properties descriptors support
usb: gadget: f_uac2: don't queue new requests when shutting down
Andy Shevchenko (2):
usb: dwc3: no need to initialize ret variable
usb: dwc3: convert to pcim_enable_device()
Antoine Ténart (1):
phy: exynos-mipi-video: fix check on array index
Apelete Seketeli (1):
documentation: docbook: document process of writing an musb glue layer
Arnd Bergmann (9):
PHY: Exynos: fix SATA phy license typo
phy: kona2: use 'select GENERIC_PHY' in Kconfig
usb: gadget: s3c2410_udc: don't use pr_debug return value
usb: musb: tusb-dma can't be built-in if tusb is not
usb: musb: omap2plus bus glue needs USB host support
usb: phy: msm: reset controller is mandatory now
usb: xhci: avoid warning for !PM_SLEEP
usb: ohci-da8xx can only be built-in
usb: ohci: sort out dependencies for lpc32xx and omap
Benoit Taine (1):
USB: storage: ene_ub6250: Use kmemdup instead of kmalloc + memcpy
Bjørn Mork (4):
usb: qcserial: fix multiline comment coding style
usb: qcserial: refactor device layout selection
usb: qcserial: define and use Sierra Wireless layout
usb: qcserial: remove interface number matching
Boris BREZILLON (1):
usb: ehci-platform: add optional reset controller retrieval
Dan Carpenter (2):
usb: phy: msm: change devm_ioremap() to devm_ioremap_resource()
usb: phy: msm: fix bug in probe()
Dan Williams (17):
usb: catch attempts to submit urbs with a vmalloc'd transfer buffer
usb: disable port power control if not supported in wHubCharacteristics
usb: rename usb_port device objects
usb: cleanup setting udev->removable from port_dev->connect_type
usb: assign default peer ports for root hubs
usb: assign usb3 external hub port peers
usb: find internal hub tier mismatch via acpi
usb: sysfs link peer ports
usb: make usb_port flags atomic, rename did_runtime_put to child_usage
usb: block suspension of superspeed port while hispeed peer is active
usb: don't clear FEAT_C_ENABLE on usb_port_runtime_resume failure
usb: usb3 ports do not support FEAT_C_ENABLE
usb: refactor port handling in hub_events()
usb: synchronize port poweroff and khubd
usb: introduce port status lock
usb: hub_handle_remote_wakeup() depends on CONFIG_PM_RUNTIME=y
usb: resume child device when port is powered on
Daniel Mack (3):
usb: musb: add reset hook to platform ops
usb: musb: add a work_struct to recover from babble errors
usb: musb: dsps: handle babble interrupts
David Mosberger (1):
Add support for using a MAX3421E chip as a host driver.
David Mosberger-Tang (4):
usb: host: max3421-hcd: Fix potential NULL urb dereference
usb: host: max3421-hcd: Fix missing unlock in max3421_urb_enqueue()
usb: host: max3421-hcd: fix "spi_rd8" uses dynamic stack allocation warning
usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity
Denis Carikli (1):
usb: chipidea: usbmisc: Add USB support for i.MX25/i.MX35 CPUs
Denis Turischev (1):
xhci: Switch only Intel Lynx Point-LP ports to EHCI on shutdown.
Dinh Nguyen (5):
usb: dwc2: add defines to support s3c-hsotg driver
usb: dwc2/s3c-hsotg: move s3c-hsotg into dwc2 directory
usb: dwc2: move s3c-hsotg data structures
usb: dwc2: Disable descriptor dma mode by default
usb: dwc2: Add function to calculate correct FIFO sizes
Duan Jiong (1):
usb: gadget: f_subset: replace PTR_RET with PTR_ERR_OR_ZERO
Fabio Estevam (3):
usb: xhci: Use IS_ENABLED() macro
chipidea: usbmisc_imx: Allow USB OTG to work on mx51
usb: dwc2: Remove '0x' notation when using %pad format
Felipe Balbi (16):
usb: dwc3: gadget: clear stall when disabling endpoint
usb: dwc3: core: refactor PHY initialization
usb: phy: mv-u3d: switch over to writel/readl
usb: dwc3: core: refactor mode initialization to its own function
usb: gadget: only GPL drivers in the gadget and phy framework
usb: phy: rename usb_nop_xceiv to usb_phy_generic
usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to <linux/usb/usb_phy_generic.h>
usb: musb: move usb_phy_generic_{un,}register calls to probe()/remove()
usb: phy: generic: allow multiples calls to usb_phy_generic_register()
usb: phy: generic: switch over to IS_ENABLED()
usb: dwc3: gadget: print both cmd string and number
usb: dwc3: gadget: pretty print link states
usb: dwc3: gadget: pretty print Generic CMDs
usb: phy: msm: cast to enum msm_usb_phy_type
usb: phy: msm: switch over to writel()
usb: phy: msm: enable build on other architectures
George Cherian (1):
usb: musb: Kconfig: Select the DMA driver if DMA mode of MUSB is enabled
Greg Kroah-Hartman (12):
Merge 3.15-rc3 into usb-next
Merge 3.15-rc5 into usb-next
Merge tag 'for-3.16' of git://git.kernel.org/.../kishon/linux-phy into usb-next
Merge tag 'usb-for-v3.16' of git://git.kernel.org/.../balbi/usb into usb-next
USB: remove CONFIG_USB_DEBUG from defconfig files
USB: usbip: remove CONFIG_USB_DEBUG reference
Revert "usb: gadget: net2280: Add support for PLX USB338X"
USB: media: redrat3: remove unneeded tracing macro
USB: media: redrat3: remove CONFIG_USB_DEBUG usage
USB: media: streamzap: remove CONFIG_USB_DEBUG
USB: media: lirc: igorplugusb: remove CONFIG_USB_DEBUG support
USB: orinoco_usb: remove CONFIG_USB_DEBUG support
Gregory CLEMENT (6):
usb: ehci-orion: fix clock reference leaking
usb: ehci-orion: add optional PHY support
usb: host: xhci-plat: sort the headers in alphabetic order
usb: host: xhci-plat: add clock support
usb: host: xhci-plat: add support for the Armada 375/38x XHCI controllers
Documentation: dt-bindings: update xhci-platform DT binding
Huang Rui (2):
usb: usbtest: fix unlink write error with pattern 1
usb: usbtest: add pattern check on pipe in phase of unlink read
Ivan T. Ivanov (20):
usb: phy: msm: Make driver selectable on ARCH_QCOM
usb: phy: msm: Move global regulators variables to driver state
usb: phy: msm: Enable deferred driver probing
usb: phy: msm: Migrate to Managed Device Resource allocation
usb: phy: msm: Remove unnecessarily check for valid regulators.
usb: phy: msm: Fix checkpatch.pl warnings
usb: phy: msm: Replace custom enum usb_mode_type with enum usb_dr_mode
usb: phy: msm: Remove unused pclk_src_name
usb: phy: msm: Remove HSUSB prefix from regulator names
usb: phy: msm: Properly check result from platform_get_irq()
usb: phy: msm: Add device tree support and binding information
usb: phy: msm: Use reset framework for LINK and PHY resets
usb: phy: msm: Add support for secondary PHY control
usb: phy: msm: Correct USB PHY Reset sequence for newer platform
usb: phy: msm: Handle disconnect events
usb: phy: msm: Vote for corner of VDD CX instead of voltage of VDD CX
usb: phy: msm: Use usb_add_phy_dev() to register device
usb: chipidea: msm: Add device tree binding information
usb: chipidea: msm: Add device tree support
usb: chipidea: msm: Initialize offset of the capability registers
Jean Delvare (2):
usb: dwc3: add glue layer dependencies
usb: phy: add run-time dependencies to R-Car driver
Jingoo Han (8):
usb: gadget: f_uac2: remove unnecessary OOM messages
usb: gadget: fotg210-udc: remove unnecessary OOM messages
usb: gadget: fsl_udc_core: remove unnecessary OOM messages
usb: gadget: fusb300_udc: remove unnecessary OOM messages
usb: gadget: m66592-udc: remove unnecessary OOM messages
usb: gadget: mv_u3d_core: remove unnecessary OOM messages
usb: gadget: r8a66597-udc: remove unnecessary OOM messages
usb: gadget: tcm_usb_gadget: remove unnecessary OOM messages
Joe Perches (7):
usb: ftdi-elan: Fix format fragments
usb: ftdi-elan: Convert leading spaces to tabs
usb: ftdi-elan: Coalesce formats
usb: ftdi-elan: Coalesce string fragment
usb: ftdi-elan: Use pr_<level>
USB: appledisplay: Convert /n to \n
USB: iowarrior: Convert local dbg macro to dev_dbg
Johan Hovold (61):
USB: sierra: fix AA deadlock in open error path
USB: sierra: fix use after free at suspend/resume
USB: sierra: fix urb and memory leak in resume error path
USB: sierra: fix urb and memory leak on disconnect
USB: sierra: fix remote wakeup
USB: sierra: fix characters being dropped at close
USB: sierra: fix urbs not being killed on shutdown
USB: sierra: fix resume error reporting
USB: sierra: fix line-control pipe direction
USB: sierra: remove bogus endpoint test
USB: sierra: remove unused variable
USB: sierra: remove unimplemented set_termios
USB: sierra: remove disconnected test from close
USB: sierra: do not resume I/O on closed ports
USB: sierra: remove redundant modem-control requests
USB: sierra: use interface-data accessors
USB: sierra: clean up suspend
USB: sierra: refactor delayed-urb submission
USB: sierra: minimise no-suspend window during close
USB: sierra: do not resume I/O on closing ports
USB: option: fix runtime PM handling
USB: option: fix line-control pipe direction
USB: option: add missing usb_mark_last_busy
USB: usb_wwan: fix write and suspend race
USB: usb_wwan: fix urb leak at shutdown
USB: usb_wwan: fix potential NULL-deref at resume
USB: usb_wwan: fix potential blocked I/O after resume
USB: usb_wwan: fix discarded writes on resume errors
USB: usb_wwan: fix remote wakeup
USB: usb_wwan: remove redundant modem-control request
USB: usb_wwan: remove unimplemented set_termios
USB: usb_wwan: remove redundant urb kill from port remove
USB: usb_wwan: kill interrupt urb explicitly at suspend
USB: usb_wwan: make resume error messages uniform
USB: usb_wwan: use interface-data accessors
USB: usb_wwan: clean up delayed-urb submission
USB: usb_wwan: remove comment from close
USB: usb_wwan: remove some superfluous comments
USB: usb_wwan: remove bogus function prototype
USB: usb_wwan: report failed submissions as errors
USB: usb_wwan: do not resume I/O on closing ports
USB: serial: fix potential runtime pm imbalance at device remove
USB: serial: remove overly defensive port tests
USB: kobil_sct: fix control requests without data stage
USB: cdc-acm: fix write and suspend race
USB: cdc-acm: fix write and resume race
USB: cdc-acm: fix broken runtime suspend
USB: cdc-acm: fix runtime PM for control messages
USB: cdc-acm: fix shutdown and suspend race
USB: cdc-acm: fix potential urb leak and PM imbalance in write
USB: cdc-acm: fix open and suspend race
USB: cdc-acm: fix failed open not being detected
USB: cdc-acm: fix I/O after failed open
USB: cdc-acm: fix runtime PM imbalance at shutdown
USB: cdc-acm: simplify runtime PM locking
USB: cdc-acm: remove redundant disconnected test from shutdown
USB: cdc-acm: minimise no-suspend window during shutdown
USB: cdc-acm: do not update PM busy on read errors
USB: cdc-acm: remove redundant usb_mark_last_busy
USB: cdc-acm: use tty-port dtr_rts
USB: wusbcore: fix control-pipe directions
Julia Lawall (1):
usb: gadget: make return of 0 explicit
Kamil Debski (1):
usb: ehci-exynos: Change to use phy provided by the generic phy framework
Konrad Zapalowicz (1):
usb: pci_quirks: fix sparse 'symbol not declared' warning
Laurent Pinchart (7):
USB: OHCI: Export the OHCI hub control and status_data functions
USB: EHCI: Export the ehci_hub_control function
USB: ohci-pxa27x: Add support for external vbus regulators
ARM: pxa: zeus: Replace OHCI init/exit functions with a regulator
usb: gadget: uvc: Switch to monotonic clock for buffer timestamps
usb: gadget: uvc: Set the V4L2 buffer field to V4L2_FIELD_NONE
usb: gadget: uvc: Set the vb2 queue timestamp flags
Li Jun (15):
usb: chipidea: operate on otgsc register in a general way
usb: chipidea: export interrupt enable and status register read functions
usb: chipidea: debug: add debug file for controller registers dump
usb: phy: otg-fsm: export symbol of otg_statemachine
usb: chipidea: usb OTG fsm initialization.
usb: chipidea: host: vbus control change for OTG HNP
usb: chipidea: host: init otg port number
usb: chipidea: udc: driver update for OTG HNP
usb: chipidea: add OTG fsm operation functions implementation
usb: chipidea: OTG fsm timers initialization
usb: chipidea: OTG HNP and SRP fsm implementation
usb: chipidea: add sys inputs for OTG fsm input
usb: chipidea: debug: add debug file for OTG variables
Documentation: ABI: usb: sysfs Description for chipidea USB OTG HNP and SRP
Documentation: usb: add chipidea.txt for how to demo usb OTG HNP and SRP
Lin Wang (1):
xhci: fix wrong port number reported when setting USB2.0 hardware LPM.
Liviu Dudau (2):
usb: phy: Add SMSC USB334x PHY ID
phy: Enable USB PHY support for arm64
Marek Szyprowski (1):
usb: usb5303: add support for reference clock specified in device tree
Mathias Nyman (4):
xhci: Use command structures when queuing commands on the command ring
xhci: Add a global command queue
xhci: Use completion and status in global command queue
xhci: rework command timeout and cancellation,
Matwey V. Kornilov (2):
usb: musb: tusb6010: Add tusb_revision to struct musb to store the revision.
usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.
Maxime Ripard (4):
phy: sunxi: Rework phy initialization
Documentation: dt: Add new compatible for the A31 USB Phy
phy: usb: sunxi: Introduce Allwinner A31 USB PHY support
usb: ohci-platform: Enable optional use of reset controller
Naoki MATSUMOTO (1):
USB: delete CONFIG_USB_DEVICEFS from defconfig
Oliver Neukum (6):
xhci: unified loggig of RESET_ON_RESUME
USB: cdc-acm: use BIT macro
USB: usbtmc: fix DMA on stack
USB: appledisplay: fix race between reading and writing from the device
USB: yurex: fix race between probe() and read()
USB: udl: proper error reporting
Paul Bolle (3):
usb: phy: mv_u3d: Remove usb phy driver for mv_u3d
usb: musb: tusb: remove dead code
usb: gadget: rename CONFIG_USB_GADGET_PXA25X
Paul Zimmerman (1):
usb: dwc2: fix sparse warning
Peter Chen (13):
usb: chipidea: coordinate usb phy initialization for different phy type
usb: chipidea: add proper delay for waiting correct PHY status
usb: gadget: set gadget state as configured
usb: udc-core: set gadget state as not attached after unloading module
usb: gadget: configfs: fix typo
usb: chipidea: update TODO list
usb: chipidea: udc: delete useless code
usb: chipidea: using one inline function to cover queue work operations
Doc: usb: chipidea: need to build both kernel Image and modules
usb: chipidea: udc: update gadget states according to ch9
usb: core: remove the Kconfig entry for USB_DEBUG
usb: move usb/usb-common.c to usb/common/usb-common.c
usb: common: rename phy-fsm-usb.c to usb-otg-fsm.c
Ricardo Ribalda Delgado (2):
usb: gadget: net2280: Fix NULL pointer dereference
usb: gadget: net2280: Add support for PLX USB338X
Rickard Strandqvist (1):
USB: keyspan: fix potential null pointer dereference
Robert Baldyga (1):
tools: usb: aio example applications
Roger Quadros (2):
phy: omap-usb2: Use generic clock names "wkupclk" and "refclk"
phy: omap-usb2: Add clock names to Documentation binding
Sachin Kamat (1):
usb: host: max3421-hcd: Use module_spi_driver
Sarah Sharp (1):
xhci: Report max device limit when Enable Slot command fails.
Stephen Rothwell (1):
usb: hub_handle_remote_wakeup() only exists for CONFIG_PM=y
Thomas Petazzoni (3):
usb: ehci-orion: use platform_get_irq() for DT probing
usb: ehci-orion: rename error goto labels in ehci_orion_drv_probe()
Documentation: dt-bindings: update ehci-orion binding documentation
Thomas Pugliese (5):
uwb: fix channel change failure
uwb: add error messages when reservation establish fails
uwb: whitespace and line length cleanups
uwb: comment typo fix
uwb: fix variable set but not used warnings
Tim Bird (2):
usb: phy: msm: Fix PTS definitions for MSM USB controller
usb: phy: msm: Select secondary PHY via TCSR
Todd E Brandt (1):
USB: separate usb_address0 mutexes for each bus
Vivek Gautam (14):
usb: dwc3: exynos: Make provision for vdd regulators
usb: ohci-exynos: Remove locks for 'ohci' in suspend callback
Documentation: Document Exynos5 USB 3.0 DRD PHY
phy: Add new Exynos5 USB 3.0 PHY driver
phy: exynos5-usbdrd: Add facility for VBUS supply
usb: ohci-exynos: Use struct device instead of platform_device
usb: ehci-exynos: Use struct device instead of platform_device
usb: ohci-exynos: Add facility to use phy provided by the generic phy framework
usb: host: ehci-exynos: Use devm_ioremap_resource instead of devm_ioremap
usb: host: ehci-msm: Use devm_ioremap_resource instead of devm_ioremap
usb: host: ehci-mv: Use devm_ioremap_resource instead of devm_ioremap
usb: host: ehci-spear: Use devm_ioremap_resource instead of devm_ioremap
usb: host: ehci-tegra: Use devm_ioremap_resource instead of devm_ioremap
usb: host: ohci-exynos: Use devm_ioremap_resource instead of devm_ioremap
Wolfram Sang (1):
usb: musb: dsps: compile suspend/resume only with PM_SLEEP
Yijing Wang (1):
usb: remove redundant D0 power state set
Yoshihiro Shimoda (2):
usb: host: xhci-plat: add xhci_plat_start()
Documentation: dt-bindings: update xhci-platform DT binding for R-Car H2 and M2
xiao jin (2):
USB: usb_wwan: fix urb leak in write error path
USB: usb_wwan: fix race between write and resume
Documentation/ABI/testing/configfs-usb-gadget | 45 +
.../ABI/testing/sysfs-platform-chipidea-usb-otg | 56 +
Documentation/DocBook/Makefile | 3 +-
Documentation/DocBook/writing_musb_glue_layer.tmpl | 873 ++++
.../devicetree/bindings/phy/samsung-phy.txt | 47 +
.../devicetree/bindings/phy/sun4i-usb-phy.txt | 23 +-
Documentation/devicetree/bindings/phy/ti-phy.txt | 7 +
.../devicetree/bindings/usb/ci-hdrc-qcom.txt | 17 +
.../devicetree/bindings/usb/ehci-orion.txt | 5 +
.../devicetree/bindings/usb/exynos-usb.txt | 31 +
Documentation/devicetree/bindings/usb/gr-udc.txt | 22 +-
.../devicetree/bindings/usb/msm-hsusb.txt | 78 +
Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 +
Documentation/devicetree/bindings/usb/usb-ohci.txt | 1 +
Documentation/devicetree/bindings/usb/usb-xhci.txt | 8 +-
Documentation/devicetree/bindings/usb/usb3503.txt | 8 +
Documentation/usb/chipidea.txt | 71 +
arch/arm/configs/badge4_defconfig | 2 -
arch/arm/configs/cm_x2xx_defconfig | 1 -
arch/arm/configs/cm_x300_defconfig | 1 -
arch/arm/configs/colibri_pxa270_defconfig | 1 -
arch/arm/configs/colibri_pxa300_defconfig | 2 -
arch/arm/configs/corgi_defconfig | 1 -
arch/arm/configs/davinci_all_defconfig | 1 -
arch/arm/configs/em_x270_defconfig | 1 -
arch/arm/configs/ep93xx_defconfig | 1 -
arch/arm/configs/footbridge_defconfig | 2 -
arch/arm/configs/ixp4xx_defconfig | 1 -
arch/arm/configs/keystone_defconfig | 1 -
arch/arm/configs/kzm9g_defconfig | 1 -
arch/arm/configs/mini2440_defconfig | 1 -
arch/arm/configs/mv78xx0_defconfig | 1 -
arch/arm/configs/neponset_defconfig | 2 -
arch/arm/configs/omap1_defconfig | 2 -
arch/arm/configs/omap2plus_defconfig | 1 -
arch/arm/configs/pcm027_defconfig | 1 -
arch/arm/configs/raumfeld_defconfig | 1 -
arch/arm/configs/s3c2410_defconfig | 1 -
arch/arm/configs/s3c6400_defconfig | 1 -
arch/arm/configs/spitz_defconfig | 1 -
arch/arm/configs/tct_hammer_defconfig | 1 -
arch/arm/configs/trizeps4_defconfig | 1 -
arch/arm/configs/viper_defconfig | 1 -
arch/arm/configs/zeus_defconfig | 1 -
arch/arm/mach-msm/board-msm7x30.c | 2 +-
arch/arm/mach-msm/board-qsd8x50.c | 2 +-
arch/arm/mach-omap2/board-omap3beagle.c | 1 -
arch/arm/mach-omap2/usb-host.c | 10 +-
arch/arm/mach-pxa/zeus.c | 89 +-
arch/avr32/configs/hammerhead_defconfig | 1 -
arch/blackfin/configs/BF526-EZBRD_defconfig | 1 -
arch/blackfin/configs/BF527-EZKIT-V2_defconfig | 1 -
arch/blackfin/configs/BF527-EZKIT_defconfig | 1 -
arch/blackfin/configs/BF548-EZKIT_defconfig | 1 -
arch/blackfin/configs/CM-BF527_defconfig | 1 -
arch/blackfin/configs/CM-BF548_defconfig | 1 -
arch/blackfin/configs/IP0X_defconfig | 1 -
arch/ia64/configs/bigsur_defconfig | 1 -
arch/ia64/configs/generic_defconfig | 1 -
arch/ia64/configs/gensparse_defconfig | 1 -
arch/ia64/configs/tiger_defconfig | 1 -
arch/mips/configs/fuloong2e_defconfig | 1 -
arch/mips/configs/lemote2f_defconfig | 1 -
arch/mips/configs/mpc30x_defconfig | 1 -
arch/mips/configs/msp71xx_defconfig | 1 -
arch/mips/configs/mtx1_defconfig | 1 -
arch/mips/configs/rm200_defconfig | 1 -
arch/mips/configs/sb1250_swarm_defconfig | 1 -
arch/mips/configs/tb0219_defconfig | 1 -
arch/mips/configs/tb0226_defconfig | 1 -
arch/parisc/configs/c3000_defconfig | 2 -
arch/parisc/configs/default_defconfig | 1 -
arch/parisc/configs/generic-64bit_defconfig | 1 -
arch/powerpc/configs/40x/ep405_defconfig | 1 -
arch/powerpc/configs/44x/canyonlands_defconfig | 1 -
arch/powerpc/configs/44x/currituck_defconfig | 1 -
arch/powerpc/configs/44x/sam440ep_defconfig | 1 -
arch/powerpc/configs/52xx/cm5200_defconfig | 1 -
arch/powerpc/configs/52xx/pcm030_defconfig | 1 -
arch/powerpc/configs/52xx/tqm5200_defconfig | 1 -
arch/powerpc/configs/83xx/mpc8313_rdb_defconfig | 1 -
arch/powerpc/configs/83xx/mpc8315_rdb_defconfig | 1 -
arch/powerpc/configs/83xx/mpc832x_rdb_defconfig | 1 -
arch/powerpc/configs/83xx/mpc834x_itx_defconfig | 1 -
arch/powerpc/configs/83xx/sbc834x_defconfig | 1 -
arch/powerpc/configs/85xx/ge_imp3a_defconfig | 1 -
arch/powerpc/configs/85xx/socrates_defconfig | 1 -
arch/powerpc/configs/85xx/xes_mpc85xx_defconfig | 1 -
arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig | 1 -
arch/powerpc/configs/amigaone_defconfig | 1 -
arch/powerpc/configs/c2k_defconfig | 1 -
arch/powerpc/configs/cell_defconfig | 1 -
arch/powerpc/configs/celleb_defconfig | 1 -
arch/powerpc/configs/chrp32_defconfig | 1 -
arch/powerpc/configs/g5_defconfig | 1 -
arch/powerpc/configs/linkstation_defconfig | 1 -
arch/powerpc/configs/maple_defconfig | 1 -
arch/powerpc/configs/mpc5200_defconfig | 1 -
arch/powerpc/configs/mpc86xx_defconfig | 1 -
arch/powerpc/configs/pmac32_defconfig | 1 -
arch/powerpc/configs/ppc6xx_defconfig | 2 -
arch/powerpc/configs/storcenter_defconfig | 1 -
arch/sh/configs/apsh4ad0a_defconfig | 1 -
arch/sh/configs/ecovec24_defconfig | 1 -
arch/sh/configs/landisk_defconfig | 1 -
arch/sh/configs/rsk7203_defconfig | 1 -
arch/sh/configs/rsk7264_defconfig | 1 -
arch/sh/configs/rsk7269_defconfig | 1 -
arch/sh/configs/sdk7780_defconfig | 2 -
arch/sh/configs/se7343_defconfig | 2 -
arch/sh/configs/se7780_defconfig | 1 -
arch/sh/configs/sh2007_defconfig | 1 -
arch/sh/configs/sh7785lcr_defconfig | 1 -
arch/sh/configs/titan_defconfig | 1 -
arch/sh/configs/urquell_defconfig | 1 -
arch/unicore32/configs/unicore32_defconfig | 1 -
arch/x86/configs/i386_defconfig | 1 -
arch/x86/configs/x86_64_defconfig | 1 -
drivers/gpu/drm/udl/udl_main.c | 3 +-
drivers/media/rc/redrat3.c | 102 +-
drivers/media/rc/streamzap.c | 9 -
drivers/net/wireless/orinoco/orinoco_usb.c | 50 +-
drivers/phy/Kconfig | 13 +-
drivers/phy/Makefile | 1 +
drivers/phy/phy-exynos-mipi-video.c | 2 +-
drivers/phy/phy-exynos5-usbdrd.c | 676 +++
drivers/phy/phy-exynos5250-sata.c | 2 +-
drivers/phy/phy-omap-usb2.c | 30 +-
drivers/phy/phy-sun4i-usb.c | 75 +-
drivers/staging/media/lirc/lirc_igorplugusb.c | 30 +-
drivers/staging/usbip/userspace/README | 1 -
drivers/usb/Makefile | 3 +-
drivers/usb/chipidea/Makefile | 1 +
drivers/usb/chipidea/bits.h | 10 +
drivers/usb/chipidea/ci.h | 23 +
drivers/usb/chipidea/ci_hdrc_msm.c | 24 +-
drivers/usb/chipidea/core.c | 92 +-
drivers/usb/chipidea/debug.c | 135 +
drivers/usb/chipidea/host.c | 21 +-
drivers/usb/chipidea/otg.c | 48 +-
drivers/usb/chipidea/otg.h | 23 +-
drivers/usb/chipidea/otg_fsm.c | 842 ++++
drivers/usb/chipidea/otg_fsm.h | 129 +
drivers/usb/chipidea/udc.c | 69 +-
drivers/usb/chipidea/usbmisc_imx.c | 68 +
drivers/usb/class/cdc-acm.c | 177 +-
drivers/usb/class/cdc-acm.h | 14 +-
drivers/usb/class/usbtmc.c | 6 +-
drivers/usb/common/Makefile | 6 +
drivers/usb/{ => common}/usb-common.c | 0
.../{phy/phy-fsm-usb.c => common/usb-otg-fsm.c} | 1 +
drivers/usb/core/Kconfig | 16 +-
drivers/usb/core/hcd-pci.c | 1 -
drivers/usb/core/hcd.c | 49 +-
drivers/usb/core/hub.c | 956 ++--
drivers/usb/core/hub.h | 41 +-
drivers/usb/core/port.c | 289 +-
drivers/usb/core/usb-acpi.c | 107 +-
drivers/usb/core/usb.h | 16 +-
drivers/usb/dwc2/Kconfig | 61 +-
drivers/usb/dwc2/Makefile | 37 +-
drivers/usb/dwc2/core.c | 68 +
drivers/usb/dwc2/core.h | 182 +
drivers/usb/{gadget/s3c-hsotg.c => dwc2/gadget.c} | 598 +--
drivers/usb/dwc2/hw.h | 12 +-
drivers/usb/dwc2/platform.c | 6 +
drivers/usb/dwc3/Kconfig | 4 +-
drivers/usb/dwc3/core.c | 253 +-
drivers/usb/dwc3/dwc3-exynos.c | 71 +-
drivers/usb/dwc3/dwc3-omap.c | 2 +-
drivers/usb/dwc3/dwc3-pci.c | 21 +-
drivers/usb/dwc3/gadget.c | 83 +-
drivers/usb/gadget/Kconfig | 10 +-
drivers/usb/gadget/Makefile | 1 -
drivers/usb/gadget/atmel_usba_udc.c | 2 +-
drivers/usb/gadget/composite.c | 316 +-
drivers/usb/gadget/configfs.c | 556 ++-
drivers/usb/gadget/configfs.h | 12 +
drivers/usb/gadget/dummy_hcd.c | 4 +-
drivers/usb/gadget/f_fs.c | 33 +-
drivers/usb/gadget/f_rndis.c | 33 +-
drivers/usb/gadget/f_subset.c | 2 +-
drivers/usb/gadget/f_uac2.c | 10 +-
drivers/usb/gadget/fotg210-udc.c | 8 +-
drivers/usb/gadget/fsl_udc_core.c | 8 +-
drivers/usb/gadget/fusb300_udc.c | 8 +-
drivers/usb/gadget/gr_udc.c | 55 +-
drivers/usb/gadget/inode.c | 3 +-
drivers/usb/gadget/m66592-udc.c | 1 -
drivers/usb/gadget/mv_u3d_core.c | 14 +-
drivers/usb/gadget/net2280.c | 4 +-
drivers/usb/gadget/r8a66597-udc.c | 1 -
drivers/usb/gadget/rndis.c | 28 +-
drivers/usb/gadget/s3c-hsotg.h | 378 --
drivers/usb/gadget/s3c2410_udc.c | 3 +-
drivers/usb/gadget/storage_common.c | 52 +-
drivers/usb/gadget/tcm_usb_gadget.c | 16 +-
drivers/usb/gadget/u_ether.c | 32 +-
drivers/usb/gadget/u_f.c | 2 +-
drivers/usb/gadget/u_f.h | 26 +
drivers/usb/gadget/u_os_desc.h | 90 +
drivers/usb/gadget/u_rndis.h | 3 +
drivers/usb/gadget/udc-core.c | 2 +
drivers/usb/gadget/uvc_queue.c | 12 +-
drivers/usb/host/Kconfig | 34 +-
drivers/usb/host/Makefile | 4 +
drivers/usb/host/ehci-exynos.c | 141 +-
drivers/usb/host/ehci-hub.c | 12 +-
drivers/usb/host/ehci-msm.c | 7 +-
drivers/usb/host/ehci-mv.c | 16 +-
drivers/usb/host/ehci-orion.c | 92 +-
drivers/usb/host/ehci-platform.c | 26 +-
drivers/usb/host/ehci-spear.c | 13 +-
drivers/usb/host/ehci-tegra.c | 15 +-
drivers/usb/host/ehci.h | 3 +
drivers/usb/host/max3421-hcd.c | 1957 ++++++++
drivers/usb/host/ohci-at91.c | 11 +-
drivers/usb/host/ohci-exynos.c | 145 +-
drivers/usb/host/ohci-hcd.c | 2 +-
drivers/usb/host/ohci-hub.c | 8 +-
drivers/usb/host/ohci-platform.c | 27 +-
drivers/usb/host/ohci-pxa27x.c | 68 +
drivers/usb/host/ohci-s3c2410.c | 13 +-
drivers/usb/host/ohci.h | 3 +
drivers/usb/host/pci-quirks.h | 1 +
drivers/usb/host/xhci-hub.c | 43 +-
drivers/usb/host/xhci-mem.c | 17 +-
drivers/usb/host/xhci-mvebu.c | 72 +
drivers/usb/host/xhci-mvebu.h | 21 +
drivers/usb/host/xhci-pci.c | 10 +-
drivers/usb/host/xhci-plat.c | 51 +-
drivers/usb/host/xhci-ring.c | 587 +--
drivers/usb/host/xhci.c | 271 +-
drivers/usb/host/xhci.h | 49 +-
drivers/usb/misc/appledisplay.c | 15 +-
drivers/usb/misc/ftdi-elan.c | 4878 ++++++++++----------
drivers/usb/misc/iowarrior.c | 38 +-
drivers/usb/misc/usb3503.c | 59 +-
drivers/usb/misc/usbtest.c | 13 +
drivers/usb/misc/yurex.c | 3 +-
drivers/usb/musb/Kconfig | 5 +-
drivers/usb/musb/am35x.c | 14 +-
drivers/usb/musb/blackfin.c | 14 +-
drivers/usb/musb/da8xx.c | 16 +-
drivers/usb/musb/davinci.c | 8 +-
drivers/usb/musb/musb_core.c | 35 +
drivers/usb/musb/musb_core.h | 9 +
drivers/usb/musb/musb_dsps.c | 29 +-
drivers/usb/musb/tusb6010.c | 28 +-
drivers/usb/musb/tusb6010.h | 8 -
drivers/usb/musb/tusb6010_omap.c | 2 +-
drivers/usb/phy/Kconfig | 27 +-
drivers/usb/phy/Makefile | 2 -
drivers/usb/phy/phy-am335x.c | 4 +-
drivers/usb/phy/phy-generic.c | 65 +-
drivers/usb/phy/phy-generic.h | 8 +-
drivers/usb/phy/phy-keystone.c | 4 +-
drivers/usb/phy/phy-msm-usb.c | 702 +--
drivers/usb/phy/phy-mv-u3d-usb.c | 338 --
drivers/usb/phy/phy-mv-u3d-usb.h | 105 -
drivers/usb/phy/phy-ulpi.c | 1 +
drivers/usb/serial/bus.c | 14 +-
drivers/usb/serial/keyspan.c | 4 +-
drivers/usb/serial/kobil_sct.c | 22 +-
drivers/usb/serial/option.c | 13 +-
drivers/usb/serial/qcserial.c | 143 +-
drivers/usb/serial/sierra.c | 198 +-
drivers/usb/serial/usb-serial.c | 38 +-
drivers/usb/serial/usb-wwan.h | 6 +-
drivers/usb/serial/usb_wwan.c | 234 +-
drivers/usb/storage/ene_ub6250.c | 3 +-
drivers/usb/wusbcore/wa-rpipe.c | 4 +-
drivers/uwb/beacon.c | 7 +-
drivers/uwb/drp.c | 294 +-
drivers/uwb/est.c | 2 -
drivers/uwb/ie-rcv.c | 2 -
drivers/uwb/radio.c | 2 +-
drivers/uwb/rsv.c | 21 +-
include/linux/mfd/syscon/exynos5-pmu.h | 44 +
include/linux/platform_data/max3421-hcd.h | 24 +
include/linux/usb.h | 2 +
include/linux/usb/composite.h | 79 +
include/linux/usb/msm_hsusb.h | 39 +-
include/linux/usb/msm_hsusb_hw.h | 14 +-
.../usb/{usb_phy_gen_xceiv.h => usb_phy_generic.h} | 13 +-
.../multibuff/device_app/aio_multibuff.c | 349 ++
.../ffs-aio-example/multibuff/host_app/Makefile | 13 +
.../usb/ffs-aio-example/multibuff/host_app/test.c | 146 +
.../ffs-aio-example/simple/device_app/aio_simple.c | 335 ++
tools/usb/ffs-aio-example/simple/host_app/Makefile | 13 +
tools/usb/ffs-aio-example/simple/host_app/test.c | 148 +
291 files changed, 14364 insertions(+), 6800 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-platform-chipidea-usb-otg
create mode 100644 Documentation/DocBook/writing_musb_glue_layer.tmpl
create mode 100644 Documentation/devicetree/bindings/usb/ci-hdrc-qcom.txt
create mode 100644 Documentation/usb/chipidea.txt
create mode 100644 drivers/phy/phy-exynos5-usbdrd.c
create mode 100644 drivers/usb/chipidea/otg_fsm.c
create mode 100644 drivers/usb/chipidea/otg_fsm.h
create mode 100644 drivers/usb/common/Makefile
rename drivers/usb/{ => common}/usb-common.c (100%)
rename drivers/usb/{phy/phy-fsm-usb.c => common/usb-otg-fsm.c} (99%)
rename drivers/usb/{gadget/s3c-hsotg.c => dwc2/gadget.c} (85%)
delete mode 100644 drivers/usb/gadget/s3c-hsotg.h
create mode 100644 drivers/usb/gadget/u_os_desc.h
create mode 100644 drivers/usb/host/max3421-hcd.c
create mode 100644 drivers/usb/host/xhci-mvebu.c
create mode 100644 drivers/usb/host/xhci-mvebu.h
delete mode 100644 drivers/usb/phy/phy-mv-u3d-usb.c
delete mode 100644 drivers/usb/phy/phy-mv-u3d-usb.h
create mode 100644 include/linux/mfd/syscon/exynos5-pmu.h
create mode 100644 include/linux/platform_data/max3421-hcd.h
rename include/linux/usb/{usb_phy_gen_xceiv.h => usb_phy_generic.h} (53%)
create mode 100644 tools/usb/ffs-aio-example/multibuff/device_app/aio_multibuff.c
create mode 100644 tools/usb/ffs-aio-example/multibuff/host_app/Makefile
create mode 100644 tools/usb/ffs-aio-example/multibuff/host_app/test.c
create mode 100644 tools/usb/ffs-aio-example/simple/device_app/aio_simple.c
create mode 100644 tools/usb/ffs-aio-example/simple/host_app/Makefile
create mode 100644 tools/usb/ffs-aio-example/simple/host_app/test.c
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists