[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1401881559-18469-2-git-send-email-mperttunen@nvidia.com>
Date: Wed, 4 Jun 2014 14:32:31 +0300
From: Mikko Perttunen <mperttunen@...dia.com>
To: <swarren@...dotorg.org>, <thierry.reding@...il.com>,
<tj@...nel.org>, <pdeschrijver@...dia.com>
CC: <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
<linux-ide@...r.kernel.org>,
Mikko Perttunen <mperttunen@...dia.com>,
<devicetree@...r.kernel.org>
Subject: [PATCH 1/9] of: Add NVIDIA Tegra SATA controller binding
This patch adds device tree binding documentation for the SATA
controller found on NVIDIA Tegra SoCs.
Signed-off-by: Mikko Perttunen <mperttunen@...dia.com>
Cc: devicetree@...r.kernel.org
---
.../devicetree/bindings/ata/tegra-sata.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ata/tegra-sata.txt
diff --git a/Documentation/devicetree/bindings/ata/tegra-sata.txt b/Documentation/devicetree/bindings/ata/tegra-sata.txt
new file mode 100644
index 0000000..70e3119
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/tegra-sata.txt
@@ -0,0 +1,29 @@
+Tegra124 SoC SATA AHCI controller
+
+Required properties :
+ - compatible : Should be "nvidia,tegra124-ahci".
+ - reg : Defines the following set of registers, in the order listed:
+ - AHCI register set (SATA BAR5)
+ - SATA register set
+ - interrupts : Defines the interrupt used by SATA
+ - clocks : Defines the clocks listed in the clock-names property.
+ - clock-names : The following clock names must be present:
+ - sata
+ - sata-oob
+ - cml1
+ - pll_e
+ - resets : Defines the resets listed in the reset-names property
+ - reset-names : The following reset names must be present:
+ - sata
+ - sata-oob
+ - sata-cold
+ - phys : Defines the phys listed in the phy-names property
+ - phy-names : The following phy names must be present:
+ - sata-phy : XUSB PADCTL SATA PHY
+ - hvdd-supply : Defines the SATA HVDD regulator
+ - vddio-supply : Defines the SATA VDDIO regulator
+ - avdd-supply : Defines the SATA AVDD regulator
+
+Optional properties:
+ - target-supply : Defines a regulator for a power output connector
+ for SATA devices.
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists