linux-kernel - [PATCH] stmmac: extend DMA initialization delay to 2.5 seconds

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1401973080-10085-1-git-send-email-abrodkin@synopsys.com>
Date:	Thu,  5 Jun 2014 16:58:00 +0400
From:	Alexey Brodkin <Alexey.Brodkin@...opsys.com>
To:	netdev@...r.kernel.org
Cc:	Alexey Brodkin <Alexey.Brodkin@...opsys.com>,
	"David S. Miller" <davem@...emloft.net>,
	Hans de Goede <hdegoede@...hat.com>,
	Giuseppe Cavallaro <peppe.cavallaro@...com>,
	Chen-Yu Tsai <wens@...e.org>, linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org,
	Vineet Gupta <Vineet.Gupta1@...opsys.com>
Subject: [PATCH] stmmac: extend DMA initialization delay to 2.5 seconds

On some platforms existing 100 msecond delay is not enough for DMA block to
recover after reset. This is because MAC DMA waits for all PHY input clocks
to present and depending on the board reset bit deassertion may take much
longer than previously used 100 milliseconds

I have a board that requires more than 2 seconds for DMA to zero "reset" bit.
If for other boards it's still not long enough this value should be extended
once again.

In the same change I convert "mdelay" to "msleep" to make CPU available for
other processes during DMA init delay which is especially useful in case of
delay for a few seconds.

Signed-off-by: Alexey Brodkin <abrodkin@...opsys.com>

Cc: David S. Miller <davem@...emloft.net>
Cc: Hans de Goede <hdegoede@...hat.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: Chen-Yu Tsai <wens@...e.org>
Cc: linux-kernel@...r.kernel.org
Cc: devicetree@...r.kernel.org
Cc: Vineet Gupta <vgupta@...opsys.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c | 4 ++--
 drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c  | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
index 0c2058a..f713ea7 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c
@@ -39,11 +39,11 @@ static int dwmac1000_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
 	/* DMA SW reset */
 	value |= DMA_BUS_MODE_SFT_RESET;
 	writel(value, ioaddr + DMA_BUS_MODE);
-	limit = 10;
+	limit = 100;
 	while (limit--) {
 		if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
 			break;
-		mdelay(10);
+		msleep(25);
 	}
 	if (limit < 0)
 		return -EBUSY;
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
index 7d1dce9..043585f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c
@@ -41,11 +41,11 @@ static int dwmac100_dma_init(void __iomem *ioaddr, int pbl, int fb, int mb,
 	/* DMA SW reset */
 	value |= DMA_BUS_MODE_SFT_RESET;
 	writel(value, ioaddr + DMA_BUS_MODE);
-	limit = 10;
+	limit = 100;
 	while (limit--) {
 		if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
 			break;
-		mdelay(10);
+		msleep(25);
 	}
 	if (limit < 0)
 		return -EBUSY;
-- 
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/