[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1401983326-19205-10-git-send-email-antoine.tenart@free-electrons.com>
Date: Thu, 5 Jun 2014 17:48:46 +0200
From: Antoine Ténart
<antoine.tenart@...e-electrons.com>
To: sebastian.hesselbarth@...il.com, Peter.Chen@...escale.com,
balbi@...com
Cc: Antoine Ténart
<antoine.tenart@...e-electrons.com>,
alexandre.belloni@...e-electrons.com,
thomas.petazzoni@...e-electrons.com, zmxu@...vell.com,
jszhang@...vell.com, linux-arm-kernel@...ts.infradead.org,
linux-usb@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 9/9] ARM: dts: Berlin: enable USB on the BG2Q DMP
Enable the 2 available USB PHY and USB nodes on the Marvell Berlin BG2Q
DMP.
Signed-off-by: Antoine Ténart <antoine.tenart@...e-electrons.com>
---
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index 2da9c41e29d8..4195874b9bed 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -7,6 +7,8 @@
*/
/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
#include "berlin2q.dtsi"
/ {
@@ -26,3 +28,21 @@
&uart0 {
status = "okay";
};
+
+&usb_phy0 {
+ power-gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usb_phy2 {
+ power-gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb2 {
+ status = "okay";
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists