| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1402306670-17041-6-git-send-email-javier.martinez@collabora.co.uk>
Date: Mon, 9 Jun 2014 11:37:50 +0200
From: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
To: Lee Jones <lee.jones@...aro.org>
Cc: Samuel Ortiz <sameo@...ux.intel.com>,
Mark Brown <broonie@...nel.org>,
Mike Turquette <mturquette@...aro.org>,
Liam Girdwood <lgirdwood@...il.com>,
Alessandro Zummo <a.zummo@...ertech.it>,
Kukjin Kim <kgene.kim@...sung.com>,
Doug Anderson <dianders@...omium.org>,
Olof Johansson <olof@...om.net>,
Sjoerd Simons <sjoerd.simons@...labora.co.uk>,
Daniel Stone <daniels@...labora.com>,
Tomeu Vizoso <tomeu.vizoso@...labora.com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
Javier Martinez Canillas <javier.martinez@...labora.co.uk>
Subject: [PATCH 5/5] ARM: dts: Add max77802 device node for exynos5420-peach-pit
Peach pit board uses a Maxim 77802 Power Management IC to
drive regulators and its Real Time Clock. This patch adds
support for this chip.
These are the device nodes and pinctrl configuration that
is present on the Peach pit DeviceTree source file in the
the Chrome OS kernel 3.8 tree.
Signed-off-by: Javier Martinez Canillas <javier.martinez@...labora.co.uk>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 320 +++++++++++++++++++++++++++++
1 file changed, 320 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index 1c5b8f9..cb7d720 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -111,6 +111,13 @@
samsung,pin-drv = <0>;
};
+ max77802_irq: max77802-irq {
+ samsung,pins = "gpx3-1";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
hdmi_hpd_irq: hdmi-hpd-irq {
samsung,pins = "gpx3-7";
samsung,pin-function = <0>;
@@ -124,6 +131,29 @@
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
+
+ pmic_dvs_1: pmic-dvs-1 {
+ samsung,pins = "gpy7-6";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_2 {
+ pmic_dvs_2: pmic-dvs-2 {
+ samsung,pins = "gpj4-2";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pmic_dvs_3: pmic-dvs-3 {
+ samsung,pins = "gpj4-3";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
};
&pinctrl_3 {
@@ -140,6 +170,14 @@
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ pmic_selb: pmic-selb {
+ samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
+ "gph0-6";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
};
&rtc {
@@ -189,6 +227,288 @@
};
};
+&hsi2c_4 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ max77802-pmic@9 {
+ compatible = "maxim,max77802";
+ interrupt-parent = <&gpx3>;
+ interrupts = <1 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
+ <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
+ wakeup-source;
+ reg = <0x9>;
+ #clock-cells = <1>;
+
+ /* Using idx 1 means warm reset will get good voltage */
+ max77802,pmic-buck-default-dvs-idx = <1>;
+ max77802,pmic-buck-dvs-gpios = <&gpy7 6 0>,
+ <&gpj4 2 0>,
+ <&gpj4 3 0>;
+ max77802,pmic-buck-selb-gpios = <&gph0 2 0>,
+ <&gph0 3 0>,
+ <&gph0 4 0>,
+ <&gph0 5 0>,
+ <&gph0 6 0>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_1v0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ ldo2_reg: LDO2 {
+ regulator-name = "vdd_1v2_2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ ldo3_reg: LDO3 {
+ regulator-name = "vdd_1v8_3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ vqmmc_sdcard: ldo4_reg: LDO4 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd_1v8_5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_1v8_6";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ ldo7_reg: LDO7 {
+ regulator-name = "vdd_1v8_7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd_ldo8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ ldo9_reg: LDO9 {
+ regulator-name = "vdd_ldo9";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd_ldo10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd_ldo12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+ ldo13_reg: LDO13 {
+ regulator-name = "vdd_ldo13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ ldo14_reg: LDO14 {
+ regulator-name = "vdd_ldo14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ ldo15_reg: LDO15 {
+ regulator-name = "vdd_ldo15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ ldo17_reg: LDO17 {
+ regulator-name = "vdd_g3ds";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ };
+ ldo18_reg: LDO18 {
+ regulator-name = "ldo_18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ ldo19_reg: LDO19 {
+ regulator-name = "ldo_19";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ ldo20_reg: LDO20 {
+ regulator-name = "ldo_20";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ ldo21_reg: LDO21 {
+ regulator-name = "ldo_21";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ ldo23_reg: LDO23 {
+ regulator-name = "ld0_23";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo24_reg: LDO24 {
+ regulator-name = "ldo_24";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ ldo25_reg: LDO25 {
+ regulator-name = "ldo_25";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ ldo26_reg: LDO26 {
+ regulator-name = "ldo_26";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ ldo27_reg: LDO27 {
+ regulator-name = "ldo_27";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ ldo28_reg: LDO28 {
+ regulator-name = "ldo_28";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ ldo29_reg: LDO29 {
+ regulator-name = "ldo_29";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ ldo30_reg: LDO30 {
+ regulator-name = "vdd_mifs";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+ ldo32_reg: LDO32 {
+ regulator-name = "ldo_32";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ ldo33_reg: LDO33 {
+ regulator-name = "ldo_33";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+ ldo34_reg: LDO34 {
+ regulator-name = "ldo_34";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ ldo35_reg: LDO35 {
+ regulator-name = "ldo_35";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ };
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm_real";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ };
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int_real";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ };
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ };
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_1v2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_kfc";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-ramp-delay = <12500>;
+ };
+ buck7_reg: BUCK7 {
+ regulator-name = "vdd_1v35";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ buck8_reg: BUCK8 {
+ regulator-name = "vdd_emmc";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_2v";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
&hsi2c_7 {
status = "okay";
--
2.0.0.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists