[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1402408036-5235-1-git-send-email-boris.brezillon@free-electrons.com>
Date: Tue, 10 Jun 2014 15:47:14 +0200
From: Boris BREZILLON <boris.brezillon@...e-electrons.com>
To: Wolfram Sang <wsa@...-dreams.de>
Cc: Randy Dunlap <rdunlap@...radead.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Hans de Goede <hdegoede@...hat.com>,
Shuge <shuge@...winnertech.com>, kevin@...winnertech.com,
devicetree@...r.kernel.org, linux-doc@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-i2c@...r.kernel.org,
Boris BREZILLON <boris.brezillon@...e-electrons.com>
Subject: [PATCH v5 0/2] i2c: sunxi: add P2WI controller support
Hello,
This series adds support for the P2WI block used by some Allwinner boards
to interface with the AXP221 PMIC.
Best Regards,
Boris
Changes since v4:
- add P2WI protocol description in driver header comment
- remove unneeded i2c address check
- remove unneeded irq field from p2wi struct
Changes since v3:
- update the DT bindings doc
- fix a comment that was no longer true
Changes since v2:
- drop the initialization (switch from I2C to P2WI mode) part
- print devm_ioremap_resource err code
Boris BREZILLON (2):
i2c: sunxi: add P2WI DT bindings documentation
i2c: sunxi: add P2WI (Push/Pull 2 Wire Interface) controller support
.../devicetree/bindings/i2c/i2c-sunxi-p2wi.txt | 41 +++
drivers/i2c/busses/Kconfig | 12 +
drivers/i2c/busses/Makefile | 1 +
drivers/i2c/busses/i2c-sun6i-p2wi.c | 356 +++++++++++++++++++++
4 files changed, 410 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt
create mode 100644 drivers/i2c/busses/i2c-sun6i-p2wi.c
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists