[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <539ED2C0.8030405@gmail.com>
Date: Mon, 16 Jun 2014 16:49:28 +0530
From: Tushar Behera <trblinux@...il.com>
To: Doug Anderson <dianders@...gle.com>,
Tushar Behera <tushar.b@...sung.com>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
linux-samsung-soc <linux-samsung-soc@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
Mike Turquette <mturquette@...aro.org>,
Tomasz Figa <t.figa@...sung.com>,
Russell King <linux@....linux.org.uk>,
Kumar Gala <galak@...eaurora.org>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Mark Rutland <mark.rutland@....com>,
Pawel Moll <pawel.moll@....com>,
Rob Herring <robh+dt@...nel.org>,
Kukjin Kim <kgene.kim@...sung.com>,
Kevin Hilman <khilman@...aro.org>,
Mark Brown <broonie@...aro.org>
Subject: Re: [PATCH 3/3] ARM: dts: Enable audio support for Peach-pi board
On 06/13/2014 10:33 PM, Doug Anderson wrote:
> Tushar,
>
> On Tue, Jun 10, 2014 at 10:32 PM, Tushar Behera <tushar.b@...sung.com> wrote:
>> Peach-pi board has MAX98090 audio codec connected on HSI2C-7 bus.
>
> If you want to be a stickler about it, peach-pi actually has a
> max98091. That requires code changes to the i2c driver, though.
> ...and unfortunately listing two compatible strings for i2c devices is
> broken. :(
>
Hi Doug,
You are right. I checked the boot logs, the detected codec type is
MAX98091. Since both these CODECs are supported through a single driver
and the detection of chip is done during runtime, I would suggest we go
ahead with "max98090" compatible string. I will update the commit
message accordingly.
Does that sound okay to you?
>
>> Signed-off-by: Tushar Behera <tushar.b@...sung.com>
>> ---
>> arch/arm/boot/dts/exynos5800-peach-pi.dts | 31 +++++++++++++++++++++++++++++
>> 1 file changed, 31 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
>> index f3af207..76f5966 100644
>> --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
>> +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
>> @@ -78,9 +78,27 @@
>> pinctrl-0 = <&usb301_vbus_en>;
>> enable-active-high;
>> };
>> +
>> + sound {
>> + compatible = "google,snow-audio-max98090";
>> +
>> + samsung,i2s-controller = <&i2s0>;
>> + samsung,audio-codec = <&max98090>;
>> + };
>> +};
>> +
>> +&i2s0 {
>> + status = "okay";
>
> It would be awfully nice to keep diffs between exynos5420-peach-pit
> and exynos5800-peach-pi clean. They're 99% the same. I know this has
> already gotten messed up with DP/HDMI were added, but there's no need
> to make it worse.
>
If you so desire, I will submit a patch to sort peach-pi device-tree
nodes (w.r.t. peach-pit dts file).
> Could you add these nodes in the same place within the dts they were
> added in exynos5420-peach-pit?
>
Okay, I will add it after watchdog node.
--
Tushar Behera
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
Powered by blists - more mailing lists