[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20140617141825.GA3665@lukather>
Date: Tue, 17 Jun 2014 16:18:25 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Chen-Yu Tsai <wens@...e.org>
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Samuel Ortiz <sameo@...ux.intel.com>,
Lee Jones <lee.jones@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Mike Turquette <mturquette@...aro.org>,
Emilio Lopez <emilio@...pez.com.ar>,
Linus Walleij <linus.walleij@...aro.org>,
linux-serial@...r.kernel.org,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
devicetree <devicetree@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
Hans de Goede <hdegoede@...hat.com>,
Boris BREZILLON <boris.brezillon@...e-electrons.com>,
Luc Verhaegen <libv@...net.be>
Subject: Re: [PATCH 15/22] pinctrl: sunxi: Add A23 PIO controller support
Hi,
On Tue, Jun 17, 2014 at 06:25:14PM +0800, Chen-Yu Tsai wrote:
> Hi,
>
> On Mon, May 26, 2014 at 3:08 AM, Maxime Ripard
> <maxime.ripard@...e-electrons.com> wrote:
> > On Fri, May 23, 2014 at 03:51:18PM +0800, Chen-Yu Tsai wrote:
> >> The A23 uses the same pin controller as previous SoC's from Allwinner.
> >> Add support for the pins controlled by the main PIO controller.
> >>
> >> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
> >> ---
> >> .../bindings/pinctrl/allwinner,sunxi-pinctrl.txt | 2 +
> >> drivers/pinctrl/sunxi/Kconfig | 4 +
> >> drivers/pinctrl/sunxi/Makefile | 1 +
> >> drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c | 562 +++++++++++++++++++++
> >> 4 files changed, 569 insertions(+)
> >> create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-a23.c
> >>
> >> diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
> >> index d8d0656..93ce12e 100644
> >> --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
> >> +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
> >> @@ -13,6 +13,8 @@ Required properties:
> >> "allwinner,sun6i-a31-pinctrl"
> >> "allwinner,sun6i-a31-r-pinctrl"
> >> "allwinner,sun7i-a20-pinctrl"
> >> + "allwinner,sun8i-a23-pinctrl"
> >> + "allwinner,sun8i-a23-r-pinctrl"
> >
> > This last line belongs in the R_PIO patch :)
> >
> >> - reg: Should contain the register physical address and length for the
> >> pin controller.
> >>
> >> diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
> >> index da1e830..17a4281 100644
> >> --- a/drivers/pinctrl/sunxi/Kconfig
> >> +++ b/drivers/pinctrl/sunxi/Kconfig
> >> @@ -32,4 +32,8 @@ config PINCTRL_SUN7I_A20
> >> def_bool PINCTRL_SUNXI || MACH_SUN7I
> >> select PINCTRL_SUNXI_COMMON
> >>
> >> +config PINCTRL_SUN8I_A23
> >> + def_bool PINCTRL_SUNXI || MACH_SUN8I
> >> + select PINCTRL_SUNXI_COMMON
> >
> > Since it's going to be merged in 3.16, you can just depend on MACH_SUN8I.
>
> Just want to make sure before I send v2 of the whole series, this should be
>
> def_bool MACH_SUN8I
> select PINCTRL_SUNXI_COMMON
>
> correct?
>
> Or should it be
>
> bool
> depends on MACH_SUN8I
> select PINCTRL_SUNXI_COMMON
>
> and MACH_SUN8I selects PINCTRL_SUN8I_A23
>
> I'm not sure what the transition plan was.
The former.
>
> >> endif
>
> [...]
>
> v2 will also have EINT support.
Cool :)
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
Download attachment "signature.asc" of type "application/pgp-signature" (820 bytes)
Powered by blists - more mailing lists